Instrument Technician Job Description Sample
Instrument Technician Job Ref 1800537 Apply Today! Category Nursing & Patient Support Job Family Surgical Tech Department Operating Room Mgmt Schedule Part-time Facility Surgery Center Hancock One Memorial Square Greenfield, IN 46140 United States Shift Day Job Hours 9:30am - 6:00pm x 3; with variable days Job Location The Instrument Technician position is located at the Hancock Surgery Center in Indianapolis, Indiana.Job Duties
The Instrument Technician provides technical support by selecting, assembling, and processing instruments and equipment for use.
Responsible for the cleaning, decontamination, maintenance and preservation, and sterile processing of all instruments, equipment, and non-sterile supplies.
Responsible for the care and preservation of all instrumentation. Experience
Must have two years of experience in a similar sterile processing position in an operating room setting.
Must possess knowledge of surgeon preferences, procedures, instrumentation, equipment and decontamination/sterilization. EducationHigh school diploma or GED equivalent.LicenseCertified Registered Central Service Technician (C.R.C.S.T.) strongly preferred upon hire - will be required within one year of employment.Skills
Strong written, verbal, and nonverbal interpersonal and professional communication skills are required.
Must demonstrate the ability to prioritize, organize and multi-task.
Must be able to take direction well but also be self-directed and motivated.
Requires a high degree of responsibility and responsiveness. Additional Information24 hours/week; benefit eligible; will work variable days of week
Keywords Instrument technician, instrument tech, sterile processing, CRCSTRanked among the nation's most integrated healthcare systems, Community Health Network is Central Indiana's leader in providing convenient access to exceptional healthcare services, where and when patients need them – in hospitals, health pavilions and doctor's offices, as well as workplaces, schools and homes. Exceptional care, simply delivered.Community is a non-profit health system that is deeply committed to the communities we serve with more than 200 sites of care and affiliates throughout Central Indiana. Guided by our PRIIDE Values – Patients First, Relationships, Integrity, Innovation, Dedication and Excellence – our team of caregivers is committed to providing an exceptional experience with every life we touch.
Lead Instrument Technician
French Hospital Medical Center in San Luis Obispo, CA is a part of Dignity Health of the Central Coast and is recognized for the highest quality hospitals, physicians from the top medical schools in the country, primary care offices to ensure access for all patients, premier ambulatory surgery centers, technologically advanced imaging centers, outpatient services and a comprehensive home health service; all recognized for quality, safety and service. Each hospital is supported by an active philanthropic Foundation to provide additional funding to support new programs and services, as well as to advance the community's access to health care.
About This Position In keeping with French Hospital Medical Center health care philosophy, the Lead Instrument Technician supports and promotes the provision of quality patient care by cleaning, processing and sterilizing instruments and surgical ware. The Lead Instrument Technician functions as a liaison with the OR and other departments, taking an important role in the operations of the center core.
Selection Criteria Lead Instrument Technician is aware of safety policies and procedures for patients, co-workers, equipment, and self. Six months experience as an Instrument tech/OR tech. BLS preferred.
Qualifications Instrument tech/OR tech, 6 months BLS preferred Sorry the Share function is not working properly at this moment. Please refresh the page and try again later. Connect With Us! Not ready to apply, or can't find a relevant opportunity? to learn more about a career at Dignity Health and experience #humankindness.
Equal Opportunity Dignity Health is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected Veteran status or any other characteristic protected by law. For more information about your EEO rights as an applicant, please If you need a reasonable accommodation for any part of the employment process, please contact us by telephone at (415) 438-5575 and let us know the nature of your request and your contact information.
Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this telephone number.
Employment TypeFull Time
DepartmentSurgeryHours / Pay Period80
FacilityFrench Hospital Medical Center
LocationSAN LUIS OBISPOState/ProvinceCA
Standard HoursMon-Friday (8-4:30)
Instrument Technician 3Rd Yr - 4Th Yr
Title: Instrument Technician 3rd Yr
- 4th Yr
This position is posted as a range, Instrument Technician 3rd Yr
- 4th Yr. Pay grade and title will be based on the experience and qualifications of the individual selected. Perform work of a highly skilled and complex nature, under the direction of a journeyman or supervisor, related to the analysis, detection and repair of defects in interlock and control systems, electronic devices, including solid state equipment, computers, solid state communication systems, and instruments, such as: meters, gauges, process control valves, electrohydraulic turbine control, Boiler Control Systems, Burner management systems, fuel handling system (gas & coal), water quality instrumentation, CEMS, EPA discharge monitoring equipment and calculations related to the operating efficiency of power plant equipment.
Assist in engineering studies and calculations related to the operating efficiency of power plant equipment, and assist engineers in performing other technical services. Actively participates in continuous improvement activities. The following will be performed under the direction of a journeyman industrial electrician or supervisor:
Locate, inspect, troubleshoot and repair defects in control systems involving electrical, solid state electronic, mechanical, pneumatic or hydraulic components, tubing, (or plant specific systems) using elementary or wiring diagrams, schematic diagrams or control diagrams, along with knowledge of process control. Install, calibrate, and maintain control loops. Perform necessary functions to place in or remove from service, instrument and control systems undergoing study, tests or adjustments.
Demonstrate basic working knowledge of PLC and DCS Control Systems, using force contacts, and locating hardware I/O addresses with assistance. Learn basic programming logic. Assist others in preparing necessary data for engineering procedures, specifications, bills of material and requisitions for the installation, maintenance and operation of equipment.
Setting up and connect test devices used in tests on equipment such as boilers, turbines, generators, and other power plant equipment.
Assist others in the performance of such tests. Operate and maintain equipment necessary to obtain temperatures, levels, pressures, and flows.
Learn to analyze data and calculate test results. Learn to apply general knowledge of flows using available handbooks, manuals and associated reference material. Compile and record data relating to tests and investigations.
Learn to prepare graphs, curves and reports. Maintain analyzing equipment to ensure accurate information for plant operations. Demonstrate working knowledge of industrial processes and systems.
Auto req ID: 17891BR
Location: Hallsville, TX
Job Type: Full-Time
Job Category: Power Plants
Education: High School Diploma or GED and Associate degree in Electronics or Electrical Engineering Technology, Instrumentation Controls.
For a Certificate: Electronics/Electrical Engineering or Instrumentation or equivalent Experience: Without degree, add 4 years of applicable experience in addition to HS diploma or GED; With accredited, Associates degree (2 years): Two years of applicable experience; With Certificate of Completion (18 months): Two years of applicable experience; Completion of AEP Apprentice progression.
Job experience relative to this position: Steel mills, paper mills, nuclear, nuclear navy service, chemical, oil refinery, power plant, or similar industry. Licenses/Certifications:
Must possess the appropriate State driver's license. Successful completion of the Power Plant Maintenance Selection System (MASS) test is required for this position. A review of Employment Testing Information, Test-Taking Tips, and the MASS Practice Test may be helpful.
A link to these materials may be found at AEP.com Careers by selecting Employment testing. Equal Opportunity Employer | Minorities/Females/Disability/Vets
Providence is calling a Per Diem, Variable Shift Instrument Technician to Providence Tarzana Medical Center in Tarzana, CA.
In this position you will:
Receive and process incoming supplies, instrumentation and equipment.
Perform cleaning and sterilizing duties, prepare packs of supplies, linens, and instruments in Central Supply/ Services as directed.
Perform biological and chemical monitoring in accordance with quality assurance standards.
Enter incoming and outgoing CAMS # into DME computer system.
Required qualifications for this position include:
Current LA City Fire Card within 30 days of hire
Ability to communicate effectively in English both verbally and in writing
Preferred qualifications for this position include:
One year in an acute care facility
RCST or CRCST from professional organization/association (IACSHMM, et.al.)
About the hospital you will serve: Providence Tarzana Medical Center is a 245-bed not-for-profit medical center that serves the San Fernando Valley, offering high quality specialty services, including: heart and vascular care, orthopedics, oncology and senior services. Recognizing the special health care needs of women and children, our Women’s Pavilion & Resource Center provides women’s health and maternity care in once central location. The hospital specializes in pediatrics and has one of the largest neonatal intensive care units in the San Fernando Valley. Providence Tarzana has a reputation for clinical excellence and sophisticated technology with a personal touch. Providence Health & Services cares about the people and the lives that we touch each and every day. We are continually driven by the caring tradition of our heritage – the foundation of our Mission and core-values – to embrace respect, compassion, justice, excellence and stewardship. With a rich past reaching back more than 65 years in Southern California, and 150 years in total, Providence Health & Services today celebrates unprecedented growth, recognition for top quality health care, a vibrant employee culture where new ideas are encouraged and a drive to help the underprivileged - all with an eye toward the future. We offer a full comprehensive range of benefits - see our website for details http://www.providenceiscalling.jobs/rewards-benefits/
Our Mission As people of Providence, we reveal God's love for all, especially the poor and vulnerable, through our compassionate service.
About Us Providence Health & Services is the third largest not-for-profit health system in the United States. Providence employs more than 82,000 caregivers (employees) across a five-state area; AK, WA, MT, OR, and CA. Our facilities include 34 hospitals, 600 physician clinics, senior services, supportive housing and other health and educational services. Providence is proud to be an Equal Opportunity Employer. Providence does not discriminate on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law.
Other Licensed Technicians
Req ID: 166327
Apprentice Instrument Technician
Position Summary Craft instruments of the highest quality by following verbal and written procedures, and blue prints.
Responsibilities File, bend, braze, stamp, grind, and polish to create handheld surgical instruments. Some work requires the use of a microscope.
Learn and apply new techniques and skills to the manufacturing of the surgical instruments within standard times. Complete each hurdle in the 5 year apprenticeship program.
Physical Requirements Lifting up to 20 lbs., seeing, standing, walking, sitting
Environmental Factors Machine shop environment Grease, cutting fluids Safety Glasses
Qualifications Required Education- High School Diploma or equivalent. Required Experience:
Hand metal working experience.
Ability to visualize shapes.
Ability to follow verbal and written manufacturing procedures. Preferred Experience:
Previous experience preferred from other shops that provide surgical instruments. Previous experience as a watch maker, gunsmith, or jeweler preferable. Any previous experience using hand tools such as pliers, hammers, or files.
Required Skills/Qualifications: Excellent manual dexterity.
Be Aware of Recruiting Fraud #KBL Refer this job to a friend Sorry the Share function is not working properly at this moment. Please refresh the page and try again later.
Valeant Pharmaceuticals International, Inc. is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Vet
CategoryManufacturingPos. TypeFull Time
Conagra Brands has the most energized, highest-impact culture in food. Our people persistently challenge and disrupt marketplace/business conventions and we are respected for our great brands, great food, great margins and consistent results. Conagra Brands, be part of building something BIG.
Primary job responsibilities for
Instrument Technician will include troubleshooting/repairing industrial controls including but not limited to: AC/DC drives, servo controls, PLCs, monitors, power supplies, temperature controls, panel views, conveyor systems, scales and metal detection systems. Perform adjustments and calibration procedures on various forms of process equipment. Perform Preventative Maintenance as instructed on all equipment/machinery/facility.
Conagra Brandsis an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law.
Job Function: Manufacturing / Operations
Business Unit Group: Engineered Products and Solutions
Position Description: This opening is with Arconic, a division of Arconic Engines--a world leader in the investment casting of superalloys, aluminum and titanium for jet aircraft and industrial gas turbine markets. For more information on Alcoa, visit us online at www.arconic.com In this position you will schedule and perform calibrations of measuring and test equipment.
Perform required maintenance and maintain records of all calibrations and repairs. Provide assistance and records for internal and external audits. This position is available for 2nd shift 3:00-11:00 pm or 3rd shift 11:00-7:00 am
Requisition Number: 22614BR
Minimum Years of Experience: 3
+ 3 years of calibration experience.
- Electronic Technical training
Primary Location: TX-Wichita Falls
Minimum Education Required: High School or GED
Minimum Travel Required: 0-25%
High school diploma or GED from an accredited institution.
Minimum of two years continuous work experience.
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status.ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'),Political Asylee, or Refugee.
Business Unit: Arconic Engines
Job Type: Experienced Compliance With the Equal Employment Opportunity and Affirmative Action Laws and Regulations Arconic reaffirms its policy to provide equal employment opportunity in recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company-sponsored training, access to facilities, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs, recalls or termination of employment to all employees without discrimination because of race, color, religion, national origin, disability, sexual orientation, gender identity / expression, veteran status, genetic information, sex or age (within statutory limits). We live our Values and measure our success by the success of our customers, shareholders, communities and people. Arconic’s success is driven by the advantage created by the collective efforts of its employees, and is dependent upon a diverse, inclusive environment that embraces change, new ideas, respect for the individual and fosters an equal opportunity for success. We have zero tolerance for discrimination, intimidation or harassment of any kind.
At BASF, we create chemistry through the power of connected minds. By balancing economic success with environmental protection and social responsibility, we are building a more sustainable future through chemistry. As the world’s leading chemical company, we help our customers in nearly every industry meet the current and future needs of society through science and innovation. We provide a challenging and rewarding work environment with strong emphasis process safety, as well as safety of our employees and the communities we operate in, and are always working to form the best team—especially from within, through an emphasis on lifelong learning and development. Where the Chemistry Happens… Instrument Technician (1800095) – Cincinnati, OH Purpose of the Job:
Support the operation of all production departments plant-wide by maintaining the instrumentation and controls systems in good working order.
Install, wire, calibrate, and repair a wide variety of chemical process instrumentation including those for measurement and control of fluid flow, pressure, temperature, level, pH, density, and position.
Excellent troubleshooting skills are essential. Must be able to read P&ID’s, flow diagrams, single line diagrams, loop diagrams, sequence charts, and interlock tables. Must be able to use manufacturers’ technical literature available on-line, and communicate regularly with vendors’ technical representatives.
Process control systems are primarily HART protocol instruments on 4-20 mA loops tied to an Emerson DCS. However, familiarity with PLCs and local control systems is also important. Various control parameters include electrical, pneumatic, nuclear, mechanical, hydraulic, and wireless. Awareness of proportional and PID control modes is required.
Perform control loop calibrations, as well as field and bench calibration of process instruments.
Perform routine preventive maintenance inspections. Maintain ISO-9001, OSHA-PSM, and TS-16949 compliance documentation and field tagging.
This position is considered multi-skilled, i.e. the instrument technician will occasionally perform a wide variety of work besides instrumentation and controls maintenance as the plant situations dictate. This work may include basic pipe fitting, millwright, insulation, and operator assistance tasks.
Familiarity with both ANSI and metric standard fasteners and fittings, as well as domestic and European equipment is required.
Attention to detail, job site cleanliness, and orderliness are required
Must be able to communicate effectively with production personnel, supervision, engineering, and external suppliers.
Excellent safety skills. Must comply with OSHA and plant-specific safety procedures.
Ability to work independently as well as collaboratively in a team environment. Work environment:
Heavy industrial – chemical manufacturing plant, 24/7/365 operation.
Production areas are located both outdoors and indoors (not climate-controlled). Work by the instrument technician in the production areas will be approximately 80% outdoors and 20% indoors.
The work includes miscellaneous rigging and operation of crane, forklift, and aerial platform. Must be able to work at heights and in confined spaces.
The work schedule for the instrument technician is primarily day shift Monday through Friday. However, some night and weekend work is expected in order to cover plant emergencies and scheduled turnarounds. Availability by cell phone for emergency call-ins is required. Create Your Own Chemistry: What We Offer You… Adding value to our customers begins with adding value to you. You @BASF is the suite of benefits, perks, programs and unique opportunities we offer to support you—the whole you—in all stages of your life and career. With you@BASF, you create your own chemistry. The total rewards that you receive as a BASF employee go way beyond a paycheck. From competitive health and insurance plans, to robust retirement benefits that include company-matching contributions, to making sure you never stop learning, we believe in you is investing in our success. Working for a large, global organization, you’ll have a chance to grow professionally and personally, expand your network and build a rewarding and dynamic career. Ingredients for Success: What We Look For in You… Basic qualifications:
High School Diploma or GED
- Four years of experience in chemical plant instrumentation maintenance, or construction
Completion of an Industrial Instrumentation trade program or applicable trade school program.
Experience with Allen Bradley variable frequency drives.
Experience with SAP computerized maintenance management system. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law. BASF recognizes institutions of higher education accredited by the Council for Higher Education Accreditation or equivalent.
Job:PROD - Production, Maintenance & Technicians
Organization:N-EMN-Care Chemicals NA
Instrument Technician Magnet Cove, AR, USA Magnet Cove Power Plant / Full Time *This position qualifies for the AECC/AECI employee referral program. Arkansas Electric Cooperative Corporation (AECC) is an organization with a rich history and a bright future.As a leader in the energy industry we look to our employees to help us grow, change, and provide power to over 500,000 members of our 17 electric distribution cooperatives. An Instrument Technician ensures smooth and efficient operation of the power plant or plants by maintaining all plant instruments, indicating and recording devices, controls, and the plant electrical system wherever located. We’re looking for someone who can maintain a high degree of situational awareness to meet continually changing conditions with a fresh and adaptable approach. In this position, you will be given the opportunity to work alongside peers who are versatile, enthusiastic, and continuing to strive to push AECC and our mission forward.
Performs maintenance, calibration, and repair on plant control and electrical systems hardware and software including but not limited to boiler or heat recovery steam generator control systems, generator excitation and voltage control systems, and balance of plant control systems.
Maintains plant continuous emissions monitoring systems as required for compliance with State and Federal regulations.
Reviews maintenance requests, develops and follows a schedule of inspection and testing pertaining to instruments and electric service necessary to optimize plant operation and alarm condition monitoring.
Maintains familiarity with AECC Safety Manual and plant lockout/tagout program and observes and practices all safety precautions. Maintains familiarity with and abides by all applicable internal AECC policies and procedures regarding NERC and FERC compliance.
Maintains plant communication equipment including digital control networks, intercom/PA systems, telecom systems, and wireless data systems. Maintains the plant electric service system, elevator, industrial power devices, lights, heat, air conditioning, services wiring and auxiliary power batteries.
Maintains and utilizes historical plant performance database, interprets control system software, and performs data analysis as needed to support plant systems troubleshooting, maintenance troubleshooting, or engineering evaluation.
Implements modifications, as directed, to various control and electrical systems by procuring competitive pricing, installing the equipment, configuring software or settings for proper function, and updating drawings.
Travels to remotely-located hydroelectric turbine and/or combustion turbine plants and performs work as directed.
Adjusts control system parameters as necessary to optimize control loop tuning and alarm condition monitoring.
Leads efforts to troubleshoot plant systems and makes recommendations to correct problems.
Maintains a technical reference file of instruction books, drawings, schematics, etc. that will aid in comprehending and maintaining the plant instruments.
Coordinates with supervisor in developing and maintaining a stock of spare parts and special tools required to service plant instruments and electrical system.
Minimum Qualifications *EEI Position Testing will be conducted as part of the selection process · High school Diploma or equivalent, plus specialized training equal to two years of college, plus 5 years related experience and/or training. Or equivalent combination of education and experience. · Valid driver’s license.
Benefits · 2 Retirement Plan Options · Health, Dental, and Vision Insurance · 9 Paid holidays · Educational assistance · PTO Accrual · Short-term disability · Long-term disability · Free & confidential Employee Assistance Program Ready to begin your career with AECC? Apply online at www.aecc.com!
EEO/AA/M/F/VETS/DISABLED Should you elect to apply for this position, AECC/AECI will review your qualifications. If after reviewing the qualifications and experience of all applicants, your skills and credentials meet our needs, someone from our organization may contact you. Please be advised that the time required to complete the applicant review process typically takes between 30 and 90 days, but could extend beyond that. Once the position has been filled, all applicants will be notified via email. Arkansas Electric Cooperative Corporation and Arkansas Electric Cooperatives, Inc. are Equal Opportunity Workplace and an Affirmative Action Employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age or any other protected category.
Job ID2017-1362# of Openings1
DepartmentMagnet Cove Power Plant
Min Pay RateUSD $29.97/Yr.
Max Pay RateUSD $36.59/Yr.
Sr. Instrument Technician
- Essential Duties & Responsibilities • Perform installation and modifications, or work together with Engineering, Maintenance, Process Control, or outside contractors on new installations and modifications. • Understand and perform calibrations on Temperature, Pressure, Conductivity , UV, Balances, Scales, Vacuum, pH, CL2, ORP, Timers, RPM, Liquid/Gas Flow, and Gas detector instrumentation ect…. • Operate, Maintain, and repair of calibration test equipment. • Understand Automated Control systems and control system instrumentation concepts, and the relationship between each other. • Understand the operation, maintain, modify, and troubleshooting of Steam sterilizers (Autoclaves). • Initiate corrective action to ensure potentially hazard situations are avoided and safety standards are maintained relative to production or facilities. • Prepare and maintain accurate records and reports per Standard Operating Procedures. • Understanding and Knowledge of PLC, Micro processor, and control system logic. • Ability to read and interpret Loop, P&ID, Wire, and Electrical drawings. • Ability to spec out like for like or like non like for like instrumentation, to meet manufacturing process requirements. • Expected to demonstrate the skills and knowledge of an Instrumentation Technician III • Review and approve Calibration Reports and Instrument Status Update Report • Verify Out of Tolerance Conditions • Support new and existing Project Planning Session as request by Engineering or PMO Department • Assist with the review of the System Specification and Piping Identification Drawing verifications • Manage Metrology daily operation, Interface with customers as necessary when the supervisor is not available. • Oversee work performed by team members to ensure proper execution, resource allocation and complete, accurate and timely documentation • May perform other duties as assigned.
Qualifications • Must be able to work independently and make sound judgments regarding work methods and tools. • Must be able to read wiring diagrams, loop drawings and P&ID drawings • Knowledge of cGMP manufacturing. • Knowledge of basic laboratory and pharmaceutical production equipment including but not limited to: autoclaves, process tanks, incubators, analytical equipment, and CIP/SIP systems. • Knowledge of basic chemical and biological safety procedures. • Must have the ability to correctly complete high school-level mathematics. • Incumbent must be proficient in a variety of mathematical disciplines and be able to work with both the metric and USA standards of measurement. • Must be able to read, write, and converse in English. • Must be able to read and follow detailed written instructions and have good verbal/written communication skills. • Good computer skills, knowledge of Microsoft Word and Excel.
Good interpersonal skills and be able to work effectively and efficiently in a team environment.
Passion for Improving Lives. Must be able to put our patients at the center of everything we do.
Quest for Innovation. Must be able to operate with agility and a learning mindset so that we can accelerate breakthrough innovations.
Inspired Teams environment. Must be able to thrive in diverse high performing teams.
Engaged with the World Around Us. Must be able to embrace change and seek diverse perspectives and partnerships to benefit patients and make a positive impact on the world.
Living our leadership behaviors is a basic expectation for all Shire employees. Shire expects all employees to embody the following:
Be Results Oriented
- Be An Excellent Manager of Self and Others Education and/or Experience
High school diploma or equivalent.
Skilled craft training/apprenticeship certificate or commensurate combination of technical education and experience.
- 6-8 years in Process Instrumentation/Calibration. Experience in pharmaceutical manufacturing environment or equivalent industry.
+ 2 year technical/AA/AS degree in metrology, instrumentation, electronics, or related technical discipline.
Working Environment • Must be able to work in controlled environments requiring special gowning. Will be required to follow gowning requirements and wear protective clothing over the head, face, hands, feet and body. Additionally, personal protective equipment must be worn due to safety requirements. • The incumbent must work in a clean room environment wearing special garments. • Will work in a cold, wet environment and hot humid environments both inside and outside of facility. • Will work around chemicals such as paint, flooring materials, refrigerants, alcohol, acids, buffers that may require respiratory protection. • Must be able to work 8 hour shifts and overtime, weekend work, and or holidays
Physical DemandThe overall physical exertion of this position is medium work. The overall physical exertion of this position is medium work. • May be required to lift up to 55 pounds when calibrating scales, and replacing pumps on Autoclaves. • May be required to (rarely) push up to 450 pounds when calibrating scales. • May be required to (rarely) up to 450 pounds when calibrating scales. • May be required to balance occasionally when working on Autoclaves, Lyo’s, HVAC, and Utility yard. • May be required to carry frequently when calibrating Temperature or Pressure instruments. • May be required to climb occasionally when calibrating or repairing Autoclaves, Utility yard, Lyo’s or Process vessels. • May be required to crawl occasionally when working on Autoclaves, Lyo’s, HVAC, and Utility yard. • May be required to use hand / finger feel frequently when working on Autoclaves, Lyo’s, HVAC, and Utility yard. • May be required movement of head /neck frequently when calibrating and working on Process instrumentation, Autoclaves, Lyo’s, HVAC, and Utility yard. • May be required to grip and grasp frequently when calibrating and working on Process instrumentation, Autoclaves, Lyo’s, HVAC, and Utility yard. • May be required to use hearing constantly when calibrating and working on Process instrumentation, Autoclaves, Lyo’s, HVAC, and Utility yard. • May be required to kneel occasionally when calibrating and working on Process instrumentation, Autoclaves, Lyo’s, HVAC, and Utility yard. • May be required repetitive/sustained stooping and bending frequently when calibrating and working on Process instrumentation, Autoclaves, Lyo’s, HVAC, and Utility yard. • May be required to stand constantly when calibrating and working on Process instrumentation, Autoclaves, Lyo’s, HVAC, and Utility yard. • May be required to walk constantly when preparing to calibrate and work on Process instrumentation, Autoclaves, Lyo’s, HVAC, and Utility yard. • May be required to drive rarely when calibrating or repairing equipment at the Lawrence Warehouse • May be required overhead reaching frequently when calibrating and working on Process instrumentation, Autoclaves, Lyo’s, HVAC, and Utility yard. • May be required to visually inspect constantly when calibrating and working on Process instrumentation, Autoclaves, Lyo’s, HVAC, and Utility yard. Equal Employment Opportunity Shire is an Equal Opportunity Employer committed to a diverse workforce. Shire will not discriminate against any worker or job applicant on the basis of race, color, religion, gender, national origin, ancestry, age, sexual orientation, marital or civil partnership status, pregnancy, gender reassignment, non-job related mental or physical disability, genetic information, veteran status, military service, application for military service, or membership in any other category protected under law. EEO is the Law - https://www.dol.gov/ofccp/regs/compliance/posters/pdf/eeopost.pdf EEO is the Law – Supplement - https://www.dol.gov/ofccp/regs/compliance/posters/pdf/OFCCP_EEO_Supplement_Final_JRF_QA_508c.pdf Pay Transparency Policy - https://www.dol.gov/ofccp/pdf/pay-transp_formattedESQA508c.pdf Reasonable Accommodations Shire is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please call 484-595-8400 and let us know the nature of your request and your contact information. Shire is the leading global biotechnology company focused on serving people with rare diseases and other highly specialized conditions. We strive to develop best-in-class products, many of which are available in more than 100 countries, across core therapeutic areas including Hematology, Immunology, Neuroscience, Ophthalmics, Lysosomal Storage Disorders, Gastrointestinal/Internal Medicine/Endocrine and Hereditary Angioedema; and a growing franchise in Oncology. Our employees come to work every day with a shared mission: to develop and deliver breakthrough therapies for the hundreds of millions of people in the world affected by rare diseases and other high-need conditions, and who lack effective therapies to live their lives to the fullest.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!