Jewelry Coater Job Description Sample

Job Description:

The Coater Operator is responsible for the efficient operation of the coating machine and the quality of the products produced.

Responsibilities

• Check quality and quantity of all raw materials being processed against work orders to assure

• the proper material is being run.

• Set up and operate the coating machine according to O.C.S. Sheet and in cooperation with the Senior Coater Operator.

• Mix chemicals use per ISO instructions.

• Check all running conditions per set up sheet and report any discrepancy.

• Fill out necessary paperwork for the job run and check for accuracy of materials used, Coatings, base stock, etc.

• Perform minor maintenance or repairs to the coating machines.

• Maintain white room/cleanroom conditions at all times within the Coating Production area by

• Way of machine cleaning and general housekeeping, i.e. floor mopping, sweeping, tacky Mats, etc.

• Stage raw stock or process material to their proper locations within the Coating Production area.

• Check various inventories needed in daily operations and advise the supervisor if low and

• Needed, i.e. gloves, blades, shop towels, etc.

• Follow all safety procedures and be responsible for the safety of everyone working on the

• Equipment or mixing room in the Coating Production area, including himself/herself.

• Report all problems associated with the operation, equipment and materials being processed to the Shift Supervisor or the Senior Coater Operator.

• Perform any and all duties as directed by the Shift Supervisor or the Senior Coater Operator.

Qualifications

• Ability to read and comprehen basic documents.

• Ability to write business correspondence and reports.

• Ability to add and subtract, multiply and divide to calculate measurements.

• Ability to compute rates, ratio, percent and interpret bar graphs and other charts and apply to practical situations.

• Ability to apply common sense understanding to interpret and carry out instructions furnished in written, oral, diagram or schedule form.

• Ability to operate a variety of standard office machines.

• Ability to multi-task and work with interruptions.

• Ability to maintain high degree of confidentiality.

• Knowledge of quality principles and capable of relating principles to Tekra quality programs.

• Analytical skills

• Accurate and attentive to detail

• Decision -making abilities.

• Interpersonal skills

• Mechanical aptitude and skills

• Organizational skills

• Prioritization skills

• Problem solving/troubleshooting skills

• Self-motivation skills, disciplined, goal-oriented

• Time management skills

• Works well in a team setting

• High School Diploma

• Forklift Certification

GPC believes the fair and equitable treatment of employees, customers, suppliers and other persons is critical to fulfilling its vision and goals. GPC conducts its business without regard to sex, race, creed, color, religion, marital status, national origin, age, pregnancy, sexual orientation, gender identity, genetic information, disability, military status, status as a veteran, or any other protected characteristic. GPC's policy is to recruit, hire, train, promote, assign, transfer and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons.

Job Description:

LOCATION: San Leandro, CA

JOB TITLE: Back-up Coater (Investment Casting)

PURPOSE: In the investment casting process, this role dips wax patterns/structures in slurry. There is actually art and craftsmanship in this process as it takes a keen eye for precision, ability to read and follow instructions, good math skills (for which we test), and physical endurance. Position can advance to robotics control if computer skills are evident. Position may advance into other roles within the plant as well.

• Under supervision reads shell process sheet instructions pertaining to each production part number.

• Under limited supervision prepares basic molds for further processing according to instructions. Lifts assemblies from racks and inserts handles to facilitate clipping/washing.

• Manually/automatic immerses the wax set-up in the appropriate washing solution according to process sheet instructions.

• Under supervision manually immerses mold in the proper slurry, applying the first coat to the mold per instructions.

• Replenish depleted slurry mixture by following specific procedures mixing solids and liquids into tanks. `

• Maintains work area in clean and orderly manner by sweeping, wiping, washing, scraping and removing waste generated by the process.

• Periodically perform turnaround functions cleaning and restoring all tanks and equipment.

• Follows all prescribed safety rules and regulations. Wears safety glasses with side shields and steel toed shoes at all times. Wears plastic coveralls to protect street garments from particulate. May be required to wear dust mask (so no beard as it would interfere with seal).

• Performs other duties of greater, lesser or of equal complexity as assigned by supervision or as required by the position.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The candidate must also portray a sincere desire to learn and broaden their knowledge base within Purchasing thereby increasing their value to the company. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential tasks of this position.

EMPLOYMENT STANDARDS includes ability to:

• Deliver technical support (i.e. how to understand and use related data and systems) as needed. Ask good questions.

• Identify, troubleshoot and resolve on time, a wide range of related challenges

• Read, understand and apply complex related information. Write clearly and legibly. Good listening skills.

• Master new computer technology, i.e. robotics

• Maintain cooperative working relationships. Demonstrate patients and willingness to learn from others.

• Demonstrate sensitivity to, and respect for a very diverse population.

• The ability to multi-task in a fast-paced environment.

EDUCATION AND EXPERIENCE

The candidate must have a High School diploma or GED

MATHEMATICAL SKILLS

Candidate must have the ability to understand and apply basic math and measuring skills (for which we test)

REASONING ABILITY

The individual must portray the ability to analytically solve practical problems and deal with a variety of variables in situations where standardization is not guaranteed. In addition the candidate must be able to interpret different types of instructions ranging from written and oral instructions, to diagrams and schedules. This is industrial manufacturing and we handcraft precision made parts for jet and rocket engines. We make each part as though our lives depend on them, because someone's life does.

PHYSICAL DEMANDS:

• Work in an industrial manufacturing environment; near moving parts, walk on uneven surfaces, climb stairs, exposure to noise and dust such as allergens

• Regularly required to stand for long periods of time, frequent walking on uneven surfaces and stairs, frequent use of computer to enter data; perform repetitive wrist, hand and finger movements

• Regularly required to work collaboratively with others, to speak on occasion, feel the attributes of objects, grasp, push, pull and reach

• Able to lift 25-50 lbs. frequently, 60-80 lbs. occasionally, and to move, push/pull 100-200 lbs. on occasion.

PCC Structurals is committed to a diverse workforce. As Equal Opportunity Employer, VEVRAA Federal Contractor, affirmative action employer we provide equal opportunity to all persons, regardless of race, religion, age, gender, disability, status as a protected veteran, national origin, color, or any other classification in accordance with federal, state, and local statutes, regulations and ordinances "Minority/Female/Disability/Veteran Status/VEVRAA Federal Contractor". Veterans are encouraged to self-identify as PCC Structurals desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA). In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact 503-652-3512 for assistance. PCC Structurals is a VEVRAA Federal Contractor committed to providing priority referrals of protected veterans for its openings. Veterans are encouraged to self-identify as desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA). If you would like more information about Equal Employment Opportunity as an applicant under the law, please visit www.eeoc.gov

To apply, send resume to Rnonomura@pccstructurals.com, or fax to (510) 225-4104

Job Description:

PURPOSE:

Under supervision, performs coating operations in the manufacture of refractory ceramic molds and slurries for a series of coatings over wax pattern assemblies.

ESSENTIAL JOB FUNCTIONS:

• Under supervision Reads shell process sheet instructions pertaining to each production part number.

• Under limited supervision Prepares basic molds for further processing according to instructions. Lifts assemblies from racks and inserts handles to facilitate clipping/washing.

• Manually/automatic immerses the wax set-up in the appropriate washing solution according to process sheet instructions.

• Under supervision manually immerses mold in the proper slurry, applying the first coat to the mold per instructions.

• Replenish depleted slurry mixture by following specific procedures mixing solids and liquids into tanks.

• Maintains work area in clean and orderly manner by sweeping, wiping, washing, scraping and removing waste generated by the process.

• Periodically perform turnaround functions cleaning and restoring all tanks and equipment.

• Follows all prescribed safety rules and regulations. Wears safety glasses with side shields and steel toed shoes at all times. Wear plastic coveralls to protect street garments from particulate.

• Performs other duties of greater, lesser or of equal complexity as assigned by supervision or as required by the position.

SPECIAL SKILLS AND PHYSICAL REQUIREMENTS:

• Considerable physical exertion consisting of frequently lifting and moving heavy weight material.

• Continuous mental and visual attention in mixing and checking slurries, dipping checking, drying and performing other duties involving constant activity.

REPORTING RELATIONSHIPS:

• Reports to Shell lead person and Shell supervisor.

EDUCATION AND EXPERIENCE:

• Uses ordinary arithmetic. Works from schedules and forms requiring the ability to understand written and verbal instructions.
• 12 months experience.

Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.

Visionworks currently has an opening for a friendly, team and goal oriented individual to join our Manufacturing team as a Coater Prep . The Coater Prep prepares and maintains area for prep coating, ensures that lenses are separated from alloy using De-Blocking tool and removing protective tape from lens. Additionally this associate will wash lens in soapy water, place lens under air-dryer, visually inspect lenses for defects and perform general daily and weekly maintenance.

Essential Responsibilities:
De-Blocking

• Prioritize tray processing as dictated by tray color.

• Properly separate lens from alloy using De-Blocking tool and remove protective tape from lens.

• Place lens/work order in designated tray slot.
  Washing

• Prioritize tray processing as dictated by tray color.

• Wash lens in soapy water using lint free cloth.

• Place lens under air-dryer to remove soapy water.

• Visually inspect lens for defects.

• Place lens/work order in designated tray slot.

• Ability to communicate and escalate with peers and principles.

• Ensure and maintain the cleanliness of all equipment, workstations and overall facility.

• Practice and comply with all requirements of our Quality Management System (QMS), as well as regulations promoting a safe and healthy work place environment.

Education, Experience & Background:

• High School Diploma, GED, or equivalent work experience

• One to three (3) years of related manufacturing experience preferred

• Must be able to read English to understand written procedures, hazardous warning, etc.

• Ability to think logically in following procedures and instructions

• General problem solving abilities

If you are prohibited from working on a government contract, this may disqualify you from consideration for this position.

Visionworks provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religious beliefs, sex, gender, sexual orientation, age, marital status, national origin, ancestry, physical or mental disability or history of disability, genetic information, status as a protected veteran or disabled veteran, or any other status protected by Federal, state or local law.

We currently have an opening for a friendly, team and goal oriented individual to join our Manufacturing Team in the position of Surface Coater Tech. The Coater Tech receives, sorts, and prioritizes work as it enters the coating area. The Coater Tech will also perform visual inspection of the lens before and after coating to validate lens surface; as well as clean and secure lens on control arm, remove lens and wiping excess water off spindles. Additionally the Coater Tech will verify air jets are properly aligned and checks both water and coating levels and perform general daily and weekly maintenance.

Essential Responsibilities:

• Prioritize tray processing as dictated by tray color.

• Perform lens visual inspection before and after coating to validate lens surface.

• Check air jets for proper alignment, check water and coating levels, refill as needed.

• Ability to communicate and escalate with peers and principles.

• Run coating prime, check coating dispense height

• Ensure and maintain the cleanliness of all equipment, workstations and overall facility.

• Practice and comply with all requirements of our Quality Management System (QMS), as well as regulations promoting a safe and healthy work place environment.

Education, Experience & Background:

• High School Diploma, GED, or equivalent work experience preferred.

• One to three (3) years of related manufacturing experience preferred.

• Able to read English to understand written procedures, hazardous warning, etc.

• Ability to think logically in following procedures and instructions

• General problem solving abilities

If you are prohibited from working on a government contract, this may disqualify you from consideration for this position.

Visionworks provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religious beliefs, sex, gender, sexual orientation, age, marital status, national origin, ancestry, physical or mental disability or history of disability, genetic information, status as a protected veteran or disabled veteran, or any other status protected by Federal, state or local law.

Who We Are:

Ball Metalpack is a pending new joint venture between Platinum Equity and Ball Corporation. The deal is expected to close later this summer. We are excited about the opportunities ahead as we leverage our expertise to create value and a sense of ownership.

Ball Metalpack produces 100 percent recyclable tinplate food and aerosol containers. As part of Ball Corporation, we've been industry leaders for years. Now we are standing up a new company with exciting new roles and responsibilities – including this one!

Metal food packaging has set the standard for freshness and preservation for well over a century, and we continue to push boundaries and develop innovations. What excites us most is the sustainability advantages that metal packaging delivers to our customers and to families. It is one of the most environmentally friendly and economical forms of packaging.

Since the aerosol can revolutionized consumer products in the 1940s, Ball has refined and improved the technology to suit today's needs. We recently breathed new air into aerosol technology with the introduction of our next generation of tinplate aerosol packaging, which is helping us meet and exceed our customers' growing expectations.

With the help of our 1,300 talented employees, Ball Metalpack will continue to revolutionize our industries, serve our customers and put the right people, processes and partners in place to help us achieve our vision and create long-term value.

Ball Metalpack is a Lean Manufacturing System environment.

Job Duties:

Primary Purpose of Position:

Performs tasks and provides services to support the plant's production goals, overall business plans, and objectives as directed.

• Complies with established job safety practices, policies and procedures as specified in plant and corporate directives for the safe performance of the work assignment.

• Supports and follows the guidelines of the food safety system.

• Performs routine manual production functions or physical adjustments necessary to meet customer specifications.

• Conducts visual inspection of in-process materials to ensure customer specifications.

• Performs and charts quality checks of in-process materials and is responsible for required operating data.

• Performs on-the-job training and development of assigned personnel.

• Communicates pertinent information to next shift as well as to the production supervisor, maintainer, and quality assurance department.

• Performs clean-up, painting, and housekeeping duties.

• Initiates, reviews, and follows all standard operating procedures (SOPs) for area of responsibility.

• Establishes and maintains effective work relationships within the department, the division, the group, and the company. Includes ability to handle stress and to interact with others so as to establish and maintain a positive and productive work environment and minimize personal conflicts.

• Required to work scheduled shift per the needs of the plant. While the regular working cycle of this position is usually 4 days on, 4 days off, rotating monthly days to nights, working hours may vary as specified by management. Incumbent must be able to work overtime on a regular basis and/or be on call as directed by management.

• Regular and predictable attendance is required between the assigned start and end times of work.

• Assures and maintains safe and healthful working conditions while enforcing safety rules and regulations.

• Performs duties without posing a direct threat to anyone or to property. Direct threat is defined as a significant risk of substantial harm that cannot be eliminated or reduced to an acceptable level by reasonable accommodation.

Position Requirements:

• Broad training in a related field usually acquired through high school education or equivalent.

• Job related experience for 2 years minimum.

• Working knowledge of the following areas: statistical process controls.

• Required on-the-job and classroom training.

• Ability to apply standard evaluation, selection, and substantial adaptation and modification of standard production techniques, procedures, and criteria.

• Ability to learn all assigned equipment and products.

• Ability to identify product defects.

• Ability to effectively train personnel.

• Possesses an interest in and an aptitude for mechanics.

• Ability to perform basic mathematical calculations.

• Must be able to handle sensitive related and proprietary information in a confidential manner.

• Works in a manufacturing environment.

• This position is exposed to occupational hazards, including but not limited to, high noise levels, physical obstacles, exposure to chemicals, etc.

• Must wear appropriate safety glasses, hearing protection, clothing, and footwear in appropriate areas and follow safety practices.

Relocation:

Relocation for this position is NOT Available.

Ball Metalpack offers comprehensive benefits packages, including paid holidays/vacation, affordable medical, dental, life insurance, tuition reimbursement, and retirement plans.

EEO Statement:

Equal Opportunity Employer

Minority, Female, Disabled, Lesbian, Gay, Bi-sexual, Transgender and Veterans.

Description: Coats surface of parts, assemblies, and finished products with protective or decorative materials such as paint, varnish, enamel, lacquer, dope, or stain using spray gun. May select and mixes coating material; coat areas inaccessible to hand sprayer using brush or roller. May monitor and verify quality in accordance with statistical process or other control procedures.

Desired Skills:
- Experience in spray painting of military product, including with both large and small guns

• Experience in application of conformal coat to circuit card assemblies

• Experience mixing and applying conformal coat, and conformal coat inspection per J-STD-001.

BASIC QUALIFICATIONS:

• Spray painting experience

• Ability to work under a microscope and use hand tools

• Good hand/eye coordination and computer skills

• Ability to work from and follow detailed process sheets and drawings

• Ability to pass a respirator exam

• Familiarity with ESD & FOD protection requirements

• Candidate must be able to obtain a secret clearance. -Candidate must have at least an interim secret clearance prior to start.

Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.

Join us at Lockheed Martin, where we're engineering a better tomorrow.

Overview

Mohawk Industries is the leading global flooring manufacturer that creates products to enhance residential and commercial spaces around the world. Mohawk's vertically integrated manufacturing and distribution processes provide competitive advantages in the production of carpet, rugs, ceramic tile, laminate, wood, stone and vinyl flooring. Our industry-leading innovation has yielded products and technologies that differentiate our brands in the marketplace and satisfy all remodeling and new construction requirements. Our brands are among the most recognized in the industry and include American Olean, Bigelow, Daltile, Durkan, Karastan, Lees, Marazzi, Mohawk, Pergo, Unilin, Quick-Step and IVC. During the past decade, Mohawk has transformed its business from an American carpet manufacturer into the world's largest flooring company with operations in Australia, Brazil, Canada, Europe, India, Malaysia, Mexico, New Zealand, Russia and the United States.

Mohawk Industries, Inc. is an Equal Opportunity Employer committed to an inclusive workplace and a proud Drugs Don't Work participant.

EOE MINORITIES / FEMALES / PROTECTED VETERANS / DISABLED

Responsibilities
7am-7pm

• Work with Ticket Clerk, following instructions for cutting, stopping,& starting

• Match roll numbers with ticket

• Must wear safety breakaway vest or safety approved color shirt

• Limit Carpet Waste to Minimum

• Follow all job specific safety rules as well as department/company safety rules

• Complete tasks/duties assigned by supervisor or crew leader

Qualifications

• Must be able to read and write English

• Ability to lift 50 lbs repeatedly

• Ability to learn ticket clerk job

• Ability to enter data in computer (AS400)

• Must be able to obtain lift truck certification

Overview

Mohawk Industries is the leading global flooring manufacturer that creates products to enhance residential and commercial spaces around the world. Mohawk's vertically integrated manufacturing and distribution processes provide competitive advantages in the production of carpet, rugs, ceramic tile, laminate, wood, stone and vinyl flooring. Our industry-leading innovation has yielded products and technologies that differentiate our brands in the marketplace and satisfy all remodeling and new construction requirements. Our brands are among the most recognized in the industry and include American Olean, Bigelow, Daltile, Durkan, Karastan, Lees, Marazzi, Mohawk, Pergo, Unilin, Quick-Step and IVC. During the past decade, Mohawk has transformed its business from an American carpet manufacturer into the world's largest flooring company with operations in Australia, Brazil, Canada, Europe, India, Malaysia, Mexico, New Zealand, Russia and the United States.

Mohawk Industries, Inc. is an Equal Opportunity Employer committed to an inclusive workplace and a proud Drugs Don't Work participant.

EOE MINORITIES / FEMALES / PROTECTED VETERANS / DISABLED
12 HOUR NIGHT SHIFT

Responsibilities

• Work Safely, Obeying all Plant Rules & Procedures.

• Maintain a clean and orderly work place for your assigned areas.

• Deliver needed materials to manufacturing floor locations. This includes waste yarn tubes, cardboard trays and dividers and trash containers

• Work Safely, Obeying all Plant Rules & Procedures.

• Maintain a clean and orderly work place for your assigned areas.

• Deliver needed materials to manufacturing floor locations. This includes waste yarn tubes, cardboard trays and dividers and trash containers.

• Retrieve supplies from supply room as directed by crew leader

• Obtain cardboard for bays using red cardboard carts and refill as needed.

• Waste Tubs Handling

• Keep yarn waste pulled from receiving bins frequently and not let bins overfill

• Attach correct product sign on waste tubs

• Pull waste collection tubs from bays using pallet jack and place in appropriate location

• Restock bay with empty waste collection tubs as needed

• Make tickets and attach to waste tubs with AS400 program following correct denier, product and tare weights.

• Put ticketed waste tubs in proper storage location at baler or other area as directed by management

• Using waste tickets to determine appropriate bale press

• Make bale using Baler's 1,2 or 3 and use correct product to combine bale

• Follow all procedures for strapping, wrapping and moving bale to appropriate location.

• Follow all procedures for using baler and compressing material into bale

Qualifications

• Able to read and write English.

• Experience operating a lift truck.

• Basic computer skills, knowledge or ability to learn AS400 screens and required inputs

• Work outdoors as required.

• Ability to lift 40 lbs, walk up and down stairs