Knitting Machine Operator Helper Job Description Sample
Knitting Machine Operator - 3Rd Shift
- Assure the proper supply yarn is on creels.
- Assure yarn is properly creeled. “Knots” should be small and “Tails” should be short.
- Assure the machine and creels are clean and threaded correctly.
- Maintain high level of housekeeping at all times.
- Yarn should be off boxes, empty boxes and cardboard relocated to designated location.
- Separators must be put up out of the aisles and doorways.
- Empty cones off floor
- Entire area free of lint and oil
- Floor swept and clean
- Following style change (or lot change with dyed yarns), knit the first roll and hold machine until quality check in inspection is confirmed okay.
- Continuously visually check machine and fabric for defects.
- Fill out knitting ticket properly and completely which includes defects on tickets.
PLEASE CLICK ON THE URL ABOVE TO APPLY IN!
Pay Range - $10.00 - $17.00
Medical, Dental, Vision, Life, STD/LTD, 401K Retirement Plan, Bring-A-Friend to work campaign ($1000), Perfect Attendance Awards, Bonus.
Operator Helper - Equipment Operator
Under supervision, perform semi-skilled manual work in connection with an entry level position in power plant operation. Assist equipment operators while learning the following job duties:
Isolate, clean, open, replace, inspect, close and return to service plant equipment. Isolate equipment and place/remove clearance tags in the plant and switchyard. Operate, regulate, adjust, clean and perform minor maintenance on plant auxiliary systems.
Monitor and inspect all plant equipment for normal operation. Identify and report abnormal conditions to the proper authority and write work orders. Operate, clean, service and lubricate portable power driven tools and equipment.
Maintain tools, equipment and work areas in a clean and orderly condition. Utilize portable meters, analyzers and equipment to conduct tests and monitoring. Lubricate and check lubrication equipment; adjust packing glands as necessary and perform necessary operative maintenance, using appropriate hand tools.
Operate oil filtering equipment. Erect and remove simple scaffolding and rigging. Perform routine cleaning of plant areas and equipment, including outside areas, as assigned.
Load, unload, move and handle materials, supplies and equipment; open boxes, barrels, bags and other materials using material handling equipment.
Monitor water chemistry as required. Maintain water pH and follow EPA guidelines as applicable.
Assist in preparing boilers and auxiliaries for operation and removal from service. If applicable, monitor coal feed to mills and burners and observe conditions of fires and furnaces. Hand lance slag in boilers, hand- operating soot blowers, unplugging ash lines, disposing of clinkers and other similar work.
Use flow diagrams to identify system piping and equipment and revise these prints as required. Make required equipment checks and assist in performing tests and preparing related reports, graphs and curves. Perform duties in accordance with Company's safety rules, operating regulations and practices and report unsafe conditions and practices.
Train for and carry out assignments in firefighting, first aid and other emergency response programs as required. Perform other job duties as assigned.
Extruder Operator Helper - Nights 7:00 PM - 7:00 AM
This position is for Pactiv, a company of Reynolds Group Holding Inc.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Responsible for operating and troubleshooting all material blending systems.
Responsible for cleaning all material system filters, socks and canisters.
Responsible for monitoring regrind usage and make adjustments based on departmental goals.
Responsible for maintaining material flow to all machines within your area of responsibility.
Complete all required paperwork.
Identify and properly label all materials put into gaylords for later use.
Maintain material hoses; replacing when necessary.
Maintain housekeeping of all blender mezzanines, silo room, compressor area and back aisle up to the railroad tracks.
Clean silo access rooms.
Write work orders for items in need of repair.
Communicate with following shift and operators.
Follow company safety procedures and policies.
Perform company safety procedures and policies.
SPECIFIC SKILLS & EDUCATION REQUIREMENTS:
High school diploma or GED equivalent preferred.
Must have basic math skills.
Must be able to work 30' off the ground.
Must have good communication skills and be able to effectively communicate with people at all levels within the organization.
Must have the ability to lift 75 lbs occasionally as job demands.
Must have ability to work standing or walking, in a hot environment, for 12 hours with appropriate breaks.
At Pactiv, continuous innovation and development has secured our place as one of the world's largest manufacturers and distributors of foodservice and food packaging products. Pactiv currently produces custom and stock foam, plastic, aluminum, pressed-paperboard, PE coated board, and molded-fiber packaging. Want to learn more? Visit www.Pactiv.com
Pactiv LLC is an equal opportunity employer. We consider applicants for all positions without regard to race, color, religion, national origin, sex, ancestry, citizenship, marital status, sexual orientation, gender identity, age, disability, protected veteran status, or any other legally protected status. "IND1P"
¨ Responsible for operating manual, automated, and computerized machines in order to perform a wide variety of operations.
¨ Performs loading and unloading of materials into machines.
¨ Monitors operation of equipment.
¨ Performs setup of new tooling or adjustments of current tooling, in order to meet quality and production standards.
¨ Performs visual and gauging inspections of parts, using a variety of measurement tools and gauges.
¨ Maintains coolant ratios by changing filters in coolant system.
¨ Performs cleaning activities on internal and external equipment components.
¨ Completes paperwork for documentation of quality patterns.
¨ Transports material to and from workstation.
¨ Assists other team members in performing other operations when necessary.
¨ Performs housekeeping functions around work area, using hand-cleaning supplies as 5s mandates.
¨ Assists in repairs to problems with equipment if nature of problem is fairly minor.
Equal Employment Opportunity/Affirmative Action Employer M/F/Disability/Veteran
Job RequirementsEducation Requirements
Education: High school diploma or equivalent. Basic Skills training.
Experience and Skill Requirements
Experience: Manufacturing, machining operator experience preferred.
Additional Skills, Knowledge or Abilities:
1.Verbal and written communication skills
2.Physical stamina to work long overtime hours consecutively
3.Physical strength to lift and maneuver heavy parts
3.Physical agility to reach and climb
Coil Tubing Helper / Operator
Warrior Energy Services is looking for a Coiled Tubing Helper / Operator. The applicant must have a high school diploma or GED. Must be able to perform heavy physical labor, work many hours out in the elements during rain, snow, wind, extreme heat and cold. Physically fit, 21 years of age, possess valid CDL, able to be away from home for multiple days at a time. Speak and write in English, capable of understanding and passing testing regarding safety requirements in the field. Basic math skills. Pass physical exam, drug test, criminal and MVR check. Know and conform to DOT regulations. Twelve (12) months experience on a CT Crew preferred.
Essential Functions of the Job:
Present self at appointed time and place ready and able to perform work as instructed by competent authority.
Follow instructions for spotting equipment on location.
Complete Treatment Reports.
Perform pre/post job equipment inspections. Specifically, perform pre-trip vehicular inspections.
Complete DOT logs as required by regulation and training.
Keep workspaces (including vehicles) clean and free of safety hazards at all times. Observe all safety rules at all times. Knows how to use and always utilizes Personal Protective Equipment.
Assist in rig-ups/rig-downs as well as operation of all equipment during a job. Assist with maintenance of equipment, replenishment of stores and general housekeeping while in the shop. Perform scheduled maintenance on assigned equipment.
Takes instruction on how to operate tools and equipment utilized on the job and in the shop. Specifically learn to independently (without constant supervision) operate and maintain fluid pumps and nitrogen equipment.
Communicates effectively with co-workers, supervisors and customers.
Other duties as assigned by competent leadership.
Machine Operator - Holesaw Weld Operator
Perform duties involved in setting up and operating automatic blanking, heat treat forming and robotic tig welding of various size holesaws
Work from priorities provided, travelers, written or verbal instructions. Setup robotic and semi auto tig welders of various size. Load shell & cups onto robotic pallet or manually load into tig welder chuck. Start automatic cycle to weld. Visually inspect each saw for quality of weld. Adjust speed, length and position of stroke, seam current and cup current for proper heat. Position welding head and change tungsten tips as required using setting gauge according to established procedure. Rework or scrap any saw found to be out of spec
Check the quality of each holesaw for total roundness, weld height, weld penetration
Degrease cup when necessary working from travelers and record data according to established procedure.
Maintain equipment and work area in a neat and clean condition. Report any discrepancies, equipment malfunctions, defective material or other unusual situations to the Foreman.
Observe and obey all safety rules, regulations and practices and employ all safety equipment and devices.
Perform other similar or related duties as assigned or directed.
Demanding, fast-paced position resulting from deadline pressures, simultaneous competing demands and changing priorities.
Knowledge of charts, specifications, and micrometers
1-2 years experience preferred
Use of numbers including decimals
Light physical effort required, equivalent to lifting, pushing, pulling 5 to 25 pounds
High School Diploma or GED Equivalent
Hours: (2) Sunday - Thurs 5a-5p (1) Tue-Sat 5a-5p (3) Mon-Fri 5p-5a
Machine Operator Apprentice
Reports To: Supervisor and Plant Manager
FLSA Status: Non-Exempt
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Responsible for all activities associated with running a Flexo or Rotary Die Cutter including: setup, operation, cleanup, and recommending improvements to operations.
Sets up and runs the Load Former, feeding the machine
Reviews job tickets, print cards, and quality inspection paperwork with machine Captain
Sets up and operates the pre-feeder.
Reads job order and mounts specified rubber print plate and printing dies on cylinder.
Installs cylinder on shaft, and secures assembly in bed of press.
Fills dye fonts with prescribed inks or dyes.
Moves levers to engage dye rolls, adjusting position of cylinder to print two or more colors without overlapping or smearing previously printed area.
Starts press, adjusting speed, tension, and alignment of printing plate as necessary.
Cuts sample of printed material from end of printed roll and inspects for imperfections, such as blurred or off-center impressions.
Cleans rubber plate, cylinder, and dye fonts, using solvent, and lubricates press as needed, using grease gun.
May mix inks or dyes to produce desired colors.
Sets up rails, print, and die cut section on machinery accurately in accordance with proper setup techniques.
Inspects all dies before and after run to ensure that any necessary repairs are made before the next run.
Ensures all bolts for cutting dies are in place and tightly secured.
Monitor box quality, including, but not limited to, loose liner, warp, correct size, and print.
Checks anilox rolls for damage.
Maximizes the utilization of equipment by operating the machinery at available capacity and speed.
Cross trains and assist Helpers, Stackers, and Bundlers with job duties on the machine.
Cross-train on other machines.
Completes necessary reports in an accurate and timely manner, including but not limited to: Production Data,
Machine Operational Status, Safety Data, Quality Data. Turn in maintenance work orders to supervision for needed repairs.
Must be proactive in the maintenance of equipment.
Switches duties with stacker as necessary.
Complies with all company policies and procedures, including safety and maintaining good housekeeping.
Adheres to production schedule. Makes recommendations for optimizing the schedule to meet cost, quality and service goals.
Reports any issues to Supervisor.
Adherence to company policies, including its attendance is essential.
This job has no supervisory responsibilities.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience
One year certificate from college or technical school; or 2-3 to years related experience and/or training. Previous experience in a manufacturing environment or similar industry experience preferred.
Boxes, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Packaging Machine Operator
The mission of Lazarus Naturals is to bring high quality and affordable hemp-based CBD products to market so anyone can afford the positive benefits it has to offer. We have a fun, fast-paced, and close-knit workplace environment and are looking for an energetic, organized, and positive Packaging Machine Operator to join our expanding team and help us further our mission.
This is an exciting opportunity to gain experience in a booming industry and a rapidly-growing company that makes CBD accessible to those who need it most. Our ideal candidate will be detail-oriented and thrive in a fast-paced environment. This position reports directly to the Manufacturing Manager and will be directly responsible for the following:
- Observing machine operations to ensure quality and conformity of packaged products.
- Monitoring the production line, to watch for packaging problems such as pile-ups, jams, sealing issues, or product defects.
- Regulate machine flow, speed, or temperature, and adjust machine components according to the size of the product and raw material condition.
- Interfacing with electronic controls and touch-screen computers to start, stop and operate machines that package product.
- Stopping or resetting machines when malfunctions occur, clear machine jams, and report malfunctions to a lead or supervisor.
- Troubleshooting and documenting reoccurring issues such as: machine jams, defective product, or production line delays.
- Loading packaging materials such as film, cartons, glue, ink, or labels to spindles, conveyors, hoppers, or other feeding devices.
- Interfacing with QA Department to ensure defective products and packaging material are logged and corrected.
- Disassembling and reassembling equipment for sanitation, using basic tools.
- Cleaning and sanitizing of equipment to comply with food safety and quality standards.
- Inspecting and adjusting machinery and equipment, to identify worn rollers or bearings and report significant issues to a supervisor for maintenance.
- Counting and recording raw material usages and finished and rejected packaged items to calculate production efficiency and waste numbers.
- Adherence to all personnel, food safety, and safety policies.
- Ability to troubleshoot malfunctioning equipment or processes.
- Ability to analyze machine operations and propose solutions to problems.
- High mechanical aptitude is essential for this position.
- Ability to manage time effectively, plan and organize workspace.
- Ability to learn and apply company standards including, but not limited to, lock-out/tag-out, safety practices, SOPs, GMP, employee handbook, etc.
- Must be 18 years of age or older.
- High School diploma or equivalent.
- 5+ years of experience in a manufacturing/food production environment preferred.
- Medical Insurance
- Vision Insurance
- 401K Program
- Employee Discount Program
Positions require standing, repetitive movement, bending and twisting, and using hands to handle objects; exposure to sustained noise levels; exposure to a variety of food allergens; exposure to hazards such as machinery, slippery floors, ladders and powered industrial vehicles. May be required to wear personal protective equipment (PPE).
Must be available for all shifts, nights, weekends, some holidays, occasional overtime, if necessary.
Zipp General Machine Operator
Performs duties associated with operating, troubleshooting and changing over the palletizer, depalletizer, and filler equipment in addition to general cleaning.
Essential Duties and Responsibilities include the following: other duties as assigned
Monitor the various pieces of equipment in assigned area
Troubleshoots all equipment in assigned area
Performs any necessary change-overs on the various pieces of equipment
Performs hourly checks and other additional checks to verify machine operation
Perform required checks on product quality
Performs assigned preventative maintenance on equipment in assigned area
Assist in other areas as assigned during change-overs and clean ups.
Complete all necessary paperwork and inventory transactions
Maintain a clean and sanitary environment
High school diploma or equivalent. Previous experience in a food manufacturing environment is a must. Previous experience operating manufacturing or packaging equipment a plus
Machine Shop Operator 3 - Mayville, WI
Hubbell Incorporated was founded in 1888 and has grown into an international manufacturer of quality electrical, lighting and power solutions with more than 75 brands used and recognized around the world. Our founder, Harvey Hubbell, developed tooling and equipment to serve the growing demand for new assembly and manufacturing machinery during the industrial revolution.
An early, and one of many patents awarded, came for the creation of the first practical method to control electricity through the pull chain socket that remains unchanged today. As a market leader in reliable, electrical solutions, we provide more than half a million products delivered through our various business groups. Hubbell is committed to continually innovating solutions that work, transforming old products with new ideas, and ensuring that we Energize, Enlighten and Empower the communities that support us.
Hubbell Commercial & Industrial (HCI) provides solutions for a broad range of non-residential and residential construction, commercial and industrial applications along with high-voltage test and measurement solutions. As a leading global manufacturer and supplier in multiple markets, we have quality products that serve the commercial construction, datacom, industrial light, industrial heavy, high voltage, residential and oil & gas markets. HCI has built its success through strong leadership, employee and customer loyalty and an exceptional sales force.
Gleason Reel Corporation is a worldwide leader in the production of industrial duty products for cable & hose management, mobile electrification and industrial workplace solutions. In February of 1996, Gleason Reel was acquired by Hubbell Inc., and became part of the Hubbell Electrical Systems Group.
Along with Hubbell standards, our world renowned brand names include: Gleason® Reels, Festoons and Conductor Bars, PowerTrak® Cable Carriers, as well as Qualtech® Document Stands which are sold under Hubbell Workplace Solutions® division.
600 S. Clark St.
Mayville WI 53050
Perform production work on a variety of machines including NC/CNC machines loading and unloading parts and basic inspection to insure quality of the parts. Will not be responsible for set up or programming of the machines. Will have the opportunity to acquire the skills necessary to advance to Machine Shop Operator #2 classification.
Skills and Experience
Responsible for the quality of the parts produced.
Follow all safety rules regarding machine operation and proper guarding.
Maintain simple reports on productivity, quality and safety.
Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class.
Job Segment: CNC, Equipment Operator, Industrial, Machinist, Manufacturing
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!