Laborer Grinding And Polishing Job Description Sample
Polishing Manager- Full Time
Supervises and supports the Grind & Polish staff members. Demonstrates mastery of all aspects of grinding, polishing, and chamfering of glass substrates to produce filters of proper size, shape, thickness, parallelism, and surface quality. Tasked with on boarding new processes that will allow the department to provide the highest quality fabrication and surface work that can be achieved anywhere coupled with 100% on-time delivery. The position reports to the Production Manager.
Responsibilities and Duties
Demonstrates mastery of the skills required to grind, polish, and chamfer glass substrates with the highest possible quality. Achieves proficiency in operating all grinding and polishing machinery in the department.
Supervises the Grind & Polish staff to develop the most efficient ways to complete work orders with the highest level of productivity and quality. Plans, assigns, and directs work. Appraises staff performance. Rewards and disciplines employees. Builds a positive team spirit, high morale, and strong group commitment to daily production goals.
Requires departmental employees to stay on the job until the day's work is completed. If that is not possible, develops a plan to complete the work as soon as possible to return the department to on-time completion.
Performs transmitted wavefront distortion measurements on the Broadband Achromatic Twyman-Green interferometer. Trains departmental staff in using this instrument.
Studies production schedules and MCSs and estimates machine time and labor hours required to complete each work order. Communicates department capacity with the Planning Department so that Planning may complete its daily scheduling. Develops, documents, and reports departmental metrics.
Performs a quality inspection of completed work orders and enters completion data in the company's Manufacturing Resource Planning software (Omega Live) and Quality Assurance spreadsheet.
Performs evaluations and alerts the Production Manager and Planning Department of unexpected delays or product non-conformance that could negatively impact production commitments. Assists in determining root cause and corrective actions in providing resolution for product failures.
Develops Standard Operating Procedures for the department's machinery and processes when needed.
Establishes a formal training and cross-training schedule. Trains department employees on all machines and on all inspection and documentation requirements.
Works with the Maintenance Department to perform preventative maintenance on all machinery. Maintains a schedule of required preventative maintenance and instrument calibration tasks.
Recommends changes of equipment and furniture placement, development of tool boards, and implementation of other improvements to the functionality of the department.
Develops a program to resurface obsolete or substandard filters to reuse valuable glass.
Qualifications and Skills
Five to seven years minimum experience in optical shop grinding, polishing & configuring.
At least two years supervisor experience required.
Aptitude for problem solving and good communication skills necessary.
Job Type: Full time Location: Brattleboro, VTIf you believe your education and experience are in line with the position description and qualifications referred to above, please email resume and cover letter to:
Senior Optical Operator / Optical Coating / Polishing / Orlando, FL
Job Description: :
Works under general direction and from manufacturing process plans, engineering drawings, specifications and manufacturing process plans to perform a wide variety of complex and difficult coating processes which involve varying number of film layers being applied to optical elements, polish lenses, rough and finish grind flats prisms, mirrors, shop aids, test plates, and special shaped elements to specified optical MIL specifications, and to diamond turn lenses, prisms, mirrors, shop aids, test tooling and special shaped elements.
Must have the ability to work 1st, 2nd, or 3rd shift according to the collective bargaining agreement between Lockheed Martin and the UAW.
Must have the ability to work 1st, 2nd, or 3rd shift according to the collective bargaining agreement.
Experience with various types of metrology and/or running automated CNC machines for optical coating, cleaning, generating, polishing or shaping.
Experience using hand tools, diamond tools or precision machining tools.
The ability to clean and evaluate optical surfaces
The ability to test parts to ensure they meet finished specifications.
The ability to process all types of micro-optical to maxi optical elements to specified optical specifications.
Must have the ability to read and follow written work instructions, schematics and engineering drawings and work effectively in a team environment.
Prior experience with optics at the technician level is strongly desired.
Experience with optical alignment and optical metrology.
Experience with optical coating or vacuum coating chambers.
Experience with interferometers and spectrometers.
Experience working as an optician with CNC machines.
Familiarity with troubleshooting radius, irregularity and surface requirements.
Familiarity with the following items is desired: optical elements, lenses, rough and finish grind flats, mirrors, shop aids, test plates, and special shaped elements.
Experience with controlling contours, thickness wedge and surface quality.
Experience with MIL-PRF-13830B and other related Optical MIL specifications.
As a leading technology innovation company, Lockheed Martin's team of 113,000 people works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in all 50 states and more than 570 facilities that span 70 countries.
Join us at Lockheed Martin, where we're engineering a better tomorrow.
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, or disability status.
Job Location(s): Orlando Florida
Security Clearance :
Business Unit :
ESS0385 MISSILES AND FIRE CONTROL
Job Class :
Job Category :
Relocation Available :
Work Schedule :
4X10A- 4 10 hr days Mon-Thurs; Fr/Sa/Su off
Req Type :
Additional Posting Locations :
Optical Polishing Technician
The Optical Polishing/Fabrication Technician is a newly created position based at our recently opened manufacturing facility in Marlborough, MA – within the Greater Boston Area. This is a hands on position in which the successful candidate will be working within our fabrication department to use CNC grinding, CNC Dicing, and Xray equipment to align and dice our crystal material
Optical Fabrication Technician will be responsible for the set up and running of the dicing saw, Vertical Grinder, and Xray equipment in order to align and cut laser crystals/substrates.
Maintain Equipment, blades, and flanges
Maintain a neat and orderly work area.
Measuring to tight tolerances using micrometers and calipers along with microscopes
Maintain and order supplies for the department.
Participate in team projects developing process improvement methods, solutions, and procedures to enhance quality, cost, and scheduling
Follow Environmental Health and Safety Procedures
Other duties as directed
3 or more years of relevant experience in the crystal/optical/semiconductor manufacturing industry
Knowledge of 5S is desirable.
Experience with working with optical materials
Familiarity with common processes and equipment used to orient, cut, grind and polish optical/laser materials/crystals is a plus.
Experience in a production environment.
Ability to operate in a specific product oriented industrial environment
The Ability to work with minimal supervision.
Willingness to cross train in other departments.
Proficiency in utilizing Microsoft Office Suite.
Assistant Project Manager - Concrete Polishing
Position: Assistant Project Manager
Location: McKinney, TX
Salary: Start with a $55-75K base
Are you a construction professional with concrete polishing experience looking for a company that believes in you?
This is the opportunity you were looking for...
We believe in hard work and we want to offer a unique opportunity to a motivated construction professional who wants to grow with our company. Our company is based in North Dallas Fort Worth Texas.
Our ideal candidate must be organized, efficient, self-motivational, and who can set their own deadlines and complete projects with high-quality standards in a timely manner within budget.
Within a few months, we will train you to become a leader, someone who has run crews or lead crews before and has some sort of painting experience, polished concrete and/or ceiling tile/grid so that you have knowledge in products and service.
Top Reasons to Work with Us
We specialize in Polished Concrete, Epoxy & Sealed Concrete Flooring, and Ceiling Restoration. Our company is listed as certified installers for several top names products on the market and we've become one of the top facilities maintenance companies due to our top-quality service, certifications acquired, and exceptional crews.
What You Need for this Position
Concrete Polishing Experience
Estimating/Bidding Construction Experience
Must have at least 2 years in the field as a project coordinator/crew lead/ project manager
Must have at least 1-year in-office experience
Understands plans and specs
Painting, Drywall, Grind & Tile Ceiling installation Background preferred
A Plus if you are bilingual
What's In It for You
PTO and Paid Holidays
We really need someone who can adapt in any situation and has a thick skin. In this industry it is needed. So, if you are an Assistant Project Manager with concrete polishing, and/or ceiling tile/grid experience, please apply today!
Applicants must be authorized to work in the U.S.
Continuous Polishing Technician (3Rd Shift)
DUE TO A TECHNICAL ISSUE, ALL APPLICANTS INTERESTED IN THIS POSITION MUST SEND THEIR RESUME TO THE FOLLOWING E-MAIL ADDRESS: . PLEASE ENSURE YOUR E-MAIL ADDRESS IS ON YOUR RESUME SO A RECRUITER CAN CONTACT YOU. THANK YOU FOR YOUR PATIENCE AS WE WORK TO FIX THE APPLICATION ISSUE.
ASML US, LP brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, the Netherlands, and we have 18 office locations around the United States including main offices in Wilton, CT, Chandler, AZ and San Jose, CA.
Accurately manufacture and supply all ASML products in accordance with the established specification statements. Make improvements to existing products and processes, and guide the implementation of new products and processes. Ensure quality and standardization while contributing to improvements in effectivity and efficiency.
- Without direct supervision, will fabricate, grind and/or polish precision plano optics using a variety of equipment. Must be able to verify accuracy of finished product, as well as support processes and product development.
Grind and polish optics on conventional spindles, continuous grinders and polishers
Perform blocking and unblocking of parts.
Ability to work safely on fragile, high value optics
Measures work-piece for conformance to specifications
Notifies supervisor of discrepancies
Follows written and verbal English work instructions that describe the process and the required measurements
Possesses strong blueprint interpretation skills
Familiarity with using the following measurement tools: micrometers, calipers, dial indicators, height gages, and pH meters
Verify settings by regularly measuring parts before and after changes are made
Maintain continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs to supervisors and co-workers on all shifts
Maintain safe operations by adhering to safety procedures and regulations
Candidate will be required to wear PPE where appropriate and embrace the ASML 5S+1 requirements
High School or trade school graduate or G.E.D or equivalent experience.
Proven knowledge (3-7 Years) of machines and / or related technical experience.
Intermediate mathematical skills including use of basic math, geometry and trigonometry
Intermediate computer skills and familiarity with Windows 7, MS Office & SAP
Prior optical fabrication experience is required
Strong analytical skills capable of translating requirements into executable schedule
Cross train and support cross functional groups.
Self-motivated with the ability to prioritize, meet deadlines and manage changing priorities
Ability to effectively communicate one on one and in small groups to operators, management and engineers
Context of the position
Regularly exposed to moving mechanical parts, solvents grinding and polishing slurry
May also be exposed to laser energy, magnetic fields and open flames
Typically handles parts that could weigh up to 50 pounds
Will be required to stand, sit, kneel and bend to load and unload the surfaces of the machine tools
Production areas are maintained at 72 to 76 degrees and 40 to 50% relative humidity
The noise level in the manufacturing areas is usually moderate
Occasional travel may be required
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch.
The employee is occasionally required to move around the campus.
The employee may occasionally lift and/or move up to 20 pounds.
May require travel dependent on company needs.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
Can work under deadlines.
The environment generally is moderate in temperature and noise level.
Must be able to read and interpret data, information, and documents.
Can observe and respond to people and situations and interact with others encountered in the course of work.
Can learn and apply new information or skills.
EEO/AA (W/M/Vets/Disability) Employer
Location:* Wilton - CT, US
Level:* High school diploma
Experience:* 2-5 Professional
Available since:* 4/11/2018
Functional area: Manufacturing
Trades Helper [M - Th; 4:00Pm - 2:30Am]
Please note that this position has been re-posted. If you have already submitted your application, you need not submit it again, as it has already been received. As a UW employee, you have a unique opportunity to change lives on our campuses, in our state and around the world. UW employees offer their boundless energy, creative problem solving skills and dedication to build stronger minds and a healthier world.
UW faculty and staff also enjoy outstanding benefits, professional growth opportunities and unique resources in an environment noted for diversity, intellectual excitement, artistic pursuits and natural beauty. All of which has allowed the UW to be nationally recognized as a "Great College to Work For" for four consecutive years.
Facilities Services (FS) is a world-class organization providing exceptional services anywhere, anytime in support of the University of Washington's mission of teaching, research, and discovery. FS engages employees through LEAN practices and continuous improvement. FS includes eight departments that operate, maintain and support the University: Administration & Strategic Initiatives (AVP), Building Services Department (BSD), Campus Engineering & Operations (CE&O), Facilities Employee Services (FES), Facilities Maintenance & Construction (FMC), Finance and Business Services (FABS), Transportations Services (TS), and UW Emergency Management (EM). Our staff must exhibit an appreciation of, a sensitivity to, and respect for a diverse academic environment, inclusive of students, faculty and staff of many social, economic, cultural, ideological, racial and ethnic backgrounds.
Facilities Maintenance & Construction (FMC) is responsible for general maintenance, repair and renovations of all University of Washington (UW) main campus facilities including building interiors, exteriors and grounds.
We have an outstanding opportunity for a Trades Helper.
Perform semiskilled work in maintenance and construction under the direction of the supervisor and lead, assisting journey-level trades workers.
Have knowledge of common materials used by the trade. Obtain, prepare and deliver materials to the job site for installation by journey workers.
Clean up, service and operate a variety of hand and power tools.
Assist in shop office routines, including material storage and recordkeeping.
Set up and work from a variety of ladders and scaffolding.
Clean up and maintain shop areas, work sites and storage areas.
Assist journey electricians in pulling wire, hanging fixtures, cutting and threading conduit.
Take electrical meter readings.
Clean up and wash light fixtures.
Cut and prepare metal shapes for use in hanging electrical devices.
Operate hand and portable tools, including drill motors, metal cutting equipment and power hammer.
Operate machinery such as fork-lifts and scissor-lifts.
Operate vehicles such as University vans and trucks to transport tools and equipment to various worksites. Load and unload materials and supplies.
Communicate and collaborate with other Facilities Services shops to facilitate work.
Know and comply with occupational health and safety regulations specific to the work actions and conduct on the job, including Material Safety Data Sheet (MSDS) instructions, Hazard Review Checklists (HRCs) and the use of personal protective equipment (PPE) as required.
Comply with all UW and Facilities Services policies and procedures, FMC protocols, i.e. Individual Accountability Protocols (IAP). Support all management directives and the vision and values of FMC.
Participate in and follow through with FMC process improvement initiatives, including Balanced Scorecard (BSC), incorporating metrics and Lean principles into internal work processes, and promoting employee engagement in continuous improvements and innovation.
Actively participate in meetings and training as scheduled.
Provide excellent customer service through effective, courteous and professional interactions with clients, colleagues and the campus community.
Perform other duties as assigned.
Demonstrate strong personal integrity and trustworthiness.
Possess the ability to effectively handle stressful situations and changing priorities.
Anticipate, recognize and resolve problems.
Demonstrate responsibility and accountability.
Demonstrate strong organizational skills and attention to details.
Demonstrate a positive, optimistic, success-oriented attitude.
Demonstrate professional demeanor which includes being tactful, civil and courteous.
Demonstrate professional work ethics.
Continuously promote a safe work environment.
High school graduation or GED certificate;
AND six months' general work experience requiring use of trades tools at the unskilled level.
Possession of a valid motor vehicle operator's license.
Additional requirements include:
Demonstrated successful ability in taking direction, working well with others and as a member of a team.
Demonstrated excellent effective verbal and written communication skills.
Equivalent education/experience will substitute for all minimum qualifications except when there are legal requirements, such as a license/certification/registration.
Knowledge and practical experience with WISHA (Washington Industrial Safety & Health Act) and OSHA (Occupational Safety & Health Act) regulations.
Demonstrated proficiency with standard productivity software including Microsoft Office Suite or equivalent products
Experience in electrical work: assisting journey-level electricians in pulling wire, hanging fixtures, cutting and threading conduit; replacing incandescent lamps and fluorescent tubes in a wide variety of lighting fixtures throughout the campus; taking electrical meter readings; cleaning up and washing light fixtures; cutting and preparing metal shapes for use in hanging electrical devices; operating hand and portable tools, including drill motors, metal cutting equipment and power hammer.
Experience in sheet metal work: handling and placing sheet metal roofing materials; using common shop instruments, including rules and micrometers, cutting, grinding and polishing sheet metal materials; operating power shop equipment, including drill press and punch press; operating the sand blaster; making minor assemblies of preformed sheet metal components including installation of fasteners.
Conditions of Employment:
Possession of a valid Washington State Driver's License or a license recognized as valid by the State of Washington.
Regular and predictable attendance is required. May be required to accept variable work shift.
Work may require access to confined spaces and heights using approved safety precautions.
Must be able to work in a smoke-free environment.
Ability to lift and move heavy material may be required.
Must be able to work outside in all weather conditions.
Approved footwear must be provided at the employee's expense and worn on the job.
Must be able to be fitted for and wear a respirator on the job.
A tuberculosis (TB) test is required for work assignments in nonhuman primate areas and in the University of Washington Medical Center.
As a UW employee, you will enjoy generous benefits and work/life programs. For a complete description of our benefits for this position, please visit our website, click here.
The application process for UW positions may include completion of a variety of online assessments to obtain additional information that will be used in the evaluation process. These may include Work Authorization, Cover Letter and/or others. Any assessments that you need to complete will appear on your screen as soon as you select "Apply to this position". Once you begin an assessment, it must be completed at that time; if you do not complete the assessment, you will be prompted to do so the next time you access your "My Jobs" page. If you select to take it later, it will appear on your "My Jobs" page to take when you are ready. Please note that your application will not be reviewed, and you will not be considered for this position until all required assessments have been completed.
Optical Laboratory Apprentice
Description: The Optical Laboratory Apprentice is one engaged in learning one (1) or all of the duties of a laboratory benchperson, surface grinder, prescription stock clerk or other journeyperson level laboratory position, and as such is working under the direct supervision of a journeyperson or working forperson.
A benchperson is one engaged in one (1) or all of the following operations in connection with glass or plastic spectacle lenses.
Machine or hand edging.
Inserting or mounting lenses.
Dyeing and soldering.
Inspecting completed work.
Inspects glasses for the purposes of ascertaining whether the glasses or parts thereof upon completion conform to established mechanical and prescription standards.
A surface grinder is one engaged in one (1) or all of the following operations in connection with glass or plastic spectacle lenses.
Hand or mechanical blocking.
A prescription stock clerk in one engaged in the following operations.
Supplies prescription lenses and frames including transposition, base curve, and blank size selection for the purposes of manufacturing.
Receive and record, on a daily basis, missing information on prescriptions.
Order frames and lenses from prescription order and back-up stock.
Receive and verify incoming stock.
Order frames and lenses from prescription order and back-up stock.
Receive and verify incoming stock orders.
Modify lens cutouts.
Maintain and update frames and lenses information in the system.
Update frame prices.
Maintain inventory of miscellaneous optical supplies.
Perform cycle count of frames and lenses.
Input and generate work ticket from computer.
Print frame information cards on new frame product release.
Print bar code label for all frames supplied daily.
Communicate backorder issues with vendor and obtain shipping date.
Interact daily with all Optical Branch Offices regarding frames and lens status.
Performs other related duties as necessary.
This job has no supervisory responsibilities.
One (1) year prior optical benchroom experience, surface grinding experience, prescription stock clerk experience.
High school or equivalent.
Must be able to pass standard color blindness test.
Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence.
Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Must be willing to work in a Labor Management Partnership environment.
Also refer to Position Specifications outlined in the appropriate collective bargaining agreement. Primary Location:
California,Richmond,Richmond MWS Regional Optical Lab 930 Marina Way S Scheduled Weekly Hours: 40 Shift: Night Workdays: Mon, Tue, Wed, Thu, Sun Additional hours may be required based on operational need according to the provisions of the NUHW contract.
*Hours subject to change with short notice.
*Some evenings and/or Saturdays may be required. Working Hours Start: 10:00 PM Working Hours End: 6:30 AM Job Schedule:
Full-time Job Type: Standard Employee Status: Regular Employee Group/Union Affiliation:
NUHW Job Level: Entry Level Job Category: Patient Care Services (Non RN) Department:
Optical Services Travel: No
Kaiser Permanente is an equal opportunity employer committed to a diverse and inclusive workforce. Applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), age, sexual orientation, national origin, marital status, parental status, ancestry, disability, gender identity, veteran status, genetic information, other distinguishing characteristics of diversity and inclusion, or any other protected status.
External hires must pass a background check/drug screen. Qualified applicants with arrest and/or conviction records will be considered for employment in a manner consistent with federal and state laws, as well as applicable local ordinances, including but not limited to the San Francisco and Los Angeles Fair Chance Ordinances.
Click here for additional requirements >
Polisher And Deburrer
WALCO Tool & Engineering is looking for a Polisher and Deburrer for our CNC Machine Shop in Romeoville, IL.
As a member of our team, you can expect:
Excellent compensation based on your experience + overtime + monthly production bonuses
Unbeatable benefits including tuition reimbursement (rare for most companies now!), 401k with a match, five different medical plans to choose from, dental, vision, paid vacation, and holidays.
- We periodically check to see how you are adapting; when you perform well, you can receive wage increases.
- Company stability
- WALCO is privately owned by the original founder since 1968. Because of our diversified business, you can enjoy a secure position within manufacturing. Each year, we continue to invest in the future of our company by purchasing new high-tech equipment!
About the Polisher and Deburrer position:
Polish stainless steel weldments to blend welds and establish grain direction to food grade requirements utilizing hand held power tools, files and abrasive products.
Deburring sharp machined edges of stainless steel, common steel, aluminum, and plastic materials.
Stamping part numbers on parts.
Assembling machined components to customer's specifications.
Packaging parts to prevent damage in shipment.
Keep work area clean and organized.
If you have the following experience and skills, then we want to hear from you:
Experience working with your hands in finesse work such as auto body work, carpentry, metal polishing, deburring, etc.
High sense of urgency and ability to multi-task
Mechanical aptitude and ability to learn quickly
Highly self-motivated, strong work ethic and a desire to learn
Ability to read blue prints is a plus
Qualified applicants must submit to a background check, physical exam, and drug test.
Must be able to work Monday
- Friday 6:00 AM to 2:30 PM and overtime as needed.
Out of respect for your time, our online application only takes 3-5 minutes to complete! Don't let this better opportunity pass by. Apply now!
- All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex, national origin, religion, age, disability, and genetic information, status as a military veteran or any other characteristic protected by applicable law.
Machine Operator 1 (3Rd Shift)
Pratt & Whitney Amercon, Inc. provides precision machined turbine blades, vanes, and hot section components to primary turbine engine manufacturers. Pratt & Whitney Amercon is seeking a technically inclined Machine Operator who would like to join our team in Middletown, Pennsylvania.
Job Responsibilities: Machine Operator 1 activities require the ability to operate a variety of production machines. Machines may include:
CMM (Coordinate Measuring Machine), polish wheel, airflow, waterflow, shot peen, furnace, grinding machines, EDM (Electrical Discharge Machine), etc. Machine operator 1 activities may include: • Perform routine operations • Read and interpret process sheets; • Deburr and clean parts; • Gage parts; • Make minor offset changes (if required) with oversight; • Frequently utilize measuring devices and assess product acceptance based on blueprint specification(s); • Clock labor in Solumina; • Perform preventative maintenance and document results; • Document information on check sheets; • Keep dimensional data on run charts; • Complete Daily Walk Around (DWA) and utilize communication log. • Keep work area and equipment clean; • Maintain acceptable quality levels • The person in this position will frequently move about the machine line in order to operate various manufacturing equipment (approximately 90% of the time). Transport product and/or equipment weighing up to 10 pounds. • Must be able to run all equipment in the entire work loop and produce product at rate per standard work. • May be required to carry out tasks not specifically listed, within the scope and skill level of this position in support of department objectives and to develop one's skills • Adhere to lean manufacturing standards. • Adhere to all Environmental, Health & Safety guidelines, including wearing of required personal protective equipment.
The Bradbury Co., Inc. is recognized around the world as the leader of quality roll forming solutions. We are a family-owned company located in Moundridge, KS. Our headquarters in Moundridge employs around 300 employees. Join our team!
Operate metal polisher to process work pieces to print or job order specifications.
File grooved, contoured, and irregular surfaces of metal objects, such as metalworking dies and machine parts, to conform to templates, other parts, layouts, or blueprint specifications.
Grind, sand, clean, or polish objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools.
Load and adjust work pieces onto equipment or work tables, using hand tools.
Measure and mark equipment, objects, or parts to ensure grinding and polishing standards are met.
Move controls to adjust, start, or stop equipment during grinding and polishing processes.
Remove completed work pieces from equipment or work tables, using hand tools, and place work pieces in containers.
Select files or other abrasives, according to materials, sizes and shapes of work pieces, amount of stock to be removed, finishes specified, and steps in finishing processes.
Ensure conformity of finished work.
Setup and operate machinery to cut shape or form metal to specifications and ensure conformity of finished work.
Perform other duties as assigned.
Ability to operate a wide variety of machines and equipment
Ability to read and understand blueprints, setup sheets, etc.
Prefer the ability to measure parts and ensure tolerances meet specs
Prefer machine shop/manufacturing training
Strong mechanical aptitude
Prefer previous related experience
- High school degree or equivalent
Able to stand for long periods of time performing repetitive tasks
Ability to lift 50 lbs frequently
Can work well independently and with others.
Observes safety and security procedures by using equipment and materials properly.
Is consistently at work and on time, ensures work responsibilities are covered when absent.
Follows instructions, responds to management direction.
Takes responsibility for own actions.
Commits to long hours of work when necessary to reach goals
Completes tasks on time.
Must supply own hand tools.
Competitive salary with annual performance evaluations.
Health, dental, vision, and prescription drug insurance
401(k) and company match
Vacation and PTO
Safety shoe reimbursement
Payroll deduct and replacement plan for tool purchases
- 1st Shift
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!