Lamination Assembler Printed Circuit Boards Job Description Sample
Assembler - Printed Circuit Boards
Job Title: Assembler
Job Location: Malabar, FL
Job Code: ES20181909-27466
Under general supervision, responsible for performing a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies. Able to identify problems and issues in straightforward situations resulting in resolving in most issues.
Intermediate comprehension and interpretation of a variety of technical specifications, including IPC knowledge, terms, and documents. Ability to complete less structured assignments determining and/or following methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units. Makes setups and adjustments holding tolerances to blueprint specifications and work authorization documentation. Fully participate/engage in team meetings with a positive attitude.
High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience.
Ability to work under a low power microscope.
Ability to lift items up to 45 pounds
Prior experience utilizing common hand tools including but not limited to screw drivers, torque wrenches, soldering equipment and epoxy dispensing tools.
Experience soldering printed circuit boards
- IPC 620 Certification
Please be aware that many of our positions require a security clearance, or the ability to obtain one. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that Harris Corporation may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
Harris is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or membership in any other group protected by federal, state or local law.
Candidates will support Environment, Health and Safety by fulfilling the Harris EHS Policy, complying with Harris EHS programs and applicable regulations, and striving for continual EHS improvement.
Location: USA - FL - Malabar
Activation Date: Wednesday, September 19, 2018
Expiration Date: Saturday, September 21, 2019
Contract Avionics Hardware Printed Circuit Board Designer
• Develop and maintain board eCAD design libraries, including part footprints and related information.
• Contribute to PCB/PCBA design reviews by providing DFM/DFA/DFT and similar value added info.
• Contribute to determining feasibility of project goals and objectives related to PCB development.
• Collaborate in defining PCB development process improvements (procedures and checklists).
• Collaborate with PCB design tool assessment and automation.
• Demonstrate a sense of urgency, commitment, and focus on the right priorities in each PCB design.
• Independently determine general approach and provide reliable solutions to technical problems including working through complex issues related to PCB layouts and assemblies.
- Technical diploma or certification.
- A minimum of 5 years of experience as a PCB designer.
- 10,000 hours of experience as a PCB designer on Altium Designer.
- Demonstrated knowledge and use of PCB “best practices” for both design and manufacturing.
- Knowledge of IPC PCB fabrication and electronic assembly standards (e.g. IPC-7351B, IPC-2221B).
- Track record of successful board design product releases demonstrating mastery of:
- High-speed, impedance controlled stack-up, multi-layer board layout design.
- DDR4 routing with XSignals
- Fine pitch BGA routing, including blind – buried vias.
- Complex analog and digital signal routing.
- Multi-rail power delivery and high-speed signal integrity constraints.
- Design constraint management; including trace length matching, spacing rules, etc.
- Ability to create and maintain symbol / footprint libraries.
- Excellent attention to detail and strong task ownership, someone who demonstrates pride in all work.
- Must be a U.S. citizen or permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum
• Demonstrated proficiency (2,000+ hours) with Cadence OrCAD.
• Experience with board design related to safety critical hardware systems compliant with DO-254.
• Experience working with PCB/PCBA manufacturing vendors.
• High reliability board design experience; including compliance with DFM, DFA & DFT requirements.
• Familiarity with Windchill, or related tool, product design management and support.
• Familiarity with Cadence and Altium schematic capture tools / processes to support board development efforts.
Electrical Engineer Printed Circuit Board
Campus/Location:University Park CampusDate Announced:06/28/2018Date Closing:open until filled
Job Number:80115Level/Salary Band:
- 02 – M – Exempt
- 03 – N – Exempt
Work Unit: Applied Research LaboratoryDepartment:System DesignFull/Part Time:Full–Time
The Undersea Systems Office (USO) of the Applied Research Laboratory (ARL) at Penn State is seeking an Electrical Engineer, with a specialty in PCB Design. This individual will create Printed Circuit Board (PCB) layout designs using Altium Designer.
Designs will range from high speed digital to analog to power. Responsibilities include: evaluating relevant design requirements for product realization; working with electrical circuit designers; performing analysis as required to confirm design compliance; supporting other analysis functions ie: structural and thermal as required to establish PCB design compliance; write PCB test plans and procedures. This job will be filled as a level 2, or level 3, depending upon the successful candidate's competencies, education, and experience.
Typically requires a Bachelor's degree or higher in an Engineering or Science discipline or higher plus two years of related experience, or an equivalent combination of education and experience for a level 2. Additional experience and/or education and competencies are required for higher level jobs. A Bachelor's degree in Electrical Engineering is preferred.
IPC Designer certification highly desired. Preferred experience includes: proficiency with the Team Center and NX; prior experience with electronics bench testing, assembly, test equipment, firmware/software Familiarity with version control beneficial. Experience with the following is required: capable of generating complete drawings set to document PCB; fabrication drawings, assembly drawings, Bills of Materials (BOM's). Communication skills, including ability to collaborate with team members within and outside department required.
Candidates will be subject to a government security investigation. You must be a U.S. citizen to apply. Employment with the Applied Research Laboratory will require successful completion of a pre-employment drug screen. These are one year, fixed-term renewable appointments.
Sr. Commodity Manager- Printed Circuit Boards
Senior Global Commodity Mgr. - Printed Circuit Boards. This position will lead the strategy creation and execution for the PCB commodity at Juniper
Collaborate with the Juniper PCB experts to define and develop a global sourcing strategy
Lead the Juniper Global Commodity Team to identify PCB technology and business issues amongst Juniper development groups, product marketing managers and the industry.
Represent Juniper's needs to the industry and drive strategic partnerships to enable aligned investments
Identify sourcing opportunities and negotiate world class pricing and terms
Lead supplier development and commercial contract negotiations
Manage risks in corporate strategy, supplier financials, corporate compliance, and operations
Drive the implementation of commodity strategy with internal stakeholders
Possess understanding of PCB commodity industry indicators and market intelligence
Lead coordinated executive negotiation to achieve cost reductions.
Define cost drivers, develop cost models and establish should cost
Align suppliers and Juniper technology roadmaps through understanding of market trends, Juniper future requirements, and suppliers' technology value proposition
Develop suppliers to enable innovative products/solutions to align with Juniper roadmap
Select supply base and develop targeted preferred supplier list, AVL mgmt
The candidate must possess technical PCB knowledge, business acumen and excel in interpersonal communication, teamwork, conflict resolution and relationship management skills.
Minimum BS (PCB, Material Science, Electrical Engineering and/or Mechanical Engineering) with combined 10 years of Engineering and Manufacturing Experience.
Direct Experience in PCB commodity mgmt. or PCB industry experience
Possesses strong knowledge of network systems and solutions, manufacturing processes and procedures, the overall PCB product and manufacturing process, and the sub-tier PCB component supply base
Demonstrated strong leadership and influencing skills
Demonstrated experience and exposure with CEM, ODM and JDM Mfg. models
- Preferred MS in Engineering and/or MBA with 10+ years of PCB Global Commodity Management, Manufacturing or Management experience in a telecom/networking
- Travel requirements for the position 15-20%
Printed Circuit Board (Pcb) Designer
The PCB Designer will be responsible for producing PCB fabrication and assembly designs and design documentation for automotive, HVOR, and industrial sensors.
- The PCB Designer (Designer) will be responsible for PCB fabrication and PCB assembly design and related documentation, including ECAD project file data management, ECO processing, BOM support, and documentation control activity in support of sustaining engineering, derivative design, and new product design of various sensor products.
The Designer will primarily interface with internal Design Engineering customers and design peers, as well as drafters, Bill-of-Material specialists, and Document Control. The Designer will be expected to transform Design Engineering inputs into detailed design models and drawings while applying standards and best practices of industry (ex. IPC, ASME Y14 series), business unit, supplier, and department. Expertise will be demonstrated in core department competencies: design, CAD, drafting, document control (ECO, PDM, PLM), and product configuration management (BOM).
The Designer will work in a fast-paced, dynamic environment where attention to detail will be required.
Design PCBs using flexible, rigid, and ceramic PCB substrates
Create and maintain ECAD design models, drawings, and engineering specifications in accordance with relevant standards
Support peers via design sharing and ECAD/MCAD exchange via robust PDM of data sets
Process Engineering Change Orders (ECO) per quality and delivery expectations
Multi-task and work with engineers and designers to manage priorities
Document schematics with inputs from Electrical Engineering team
Support ECAD component library setup requests and maintenance
Bachelor's Degree in an electrical or mechanical engineering discipline, or equivalent experience
Two or more years professional experience and proven proficiency in PCB design and ECAD tool(s) with respect to schematic, layout, and library
Mentor Graphics experience strongly preferred
Ability to manage multiple projects and tasks in a fast-paced, rapid change product design and development environment
Strong collaborative attitude and proven teamwork track record
General understanding of product configuration management and PCB Bill-of-Material methods
Strong oral and written communication and collaboration skills
Strong organization and documentation skills
PCB data management
Knowledge of PCB/PCBA manufacture process and supply chain a plus
Experience in automotive electronics a plus
Some travel required
Our employees are the reason we have been successful in the past and the reason we will be successful in the future. Employees' skills, talents and work ethic have defined the business and will shape our collective future.
Our Vision is to be:
A world leader and early innovator in mission-critical sensors and electrical protection
Satisfying the world's growing need for safety, energy efficiency and a clean environment
A partner, employer, and neighbor of choice
NOTE: If you are a current Sensata employee (or one of our Affiliates), please back out of this application and log into Workday via the Company Intranet to apply directly. Type FIND JOBS in the Workday search bar.
Printed Circuit Board Assembler/Solderer
Electronic Assembler will perform upper level hand assembly and have experience doing through-hole, surface mount and jumper wire soldering as well as IPC-610 Inspection/touch-up. Experience painting small parts and/or screen printing type processes helpful.
DUTIES & RESPONSIBILITIES:
Work will include but not limited to: assembly, soldering, inspection, packaging, process improvements and training as well as other related activities.
Ability to perform SMT and/or PTH soldering of Printed Circuit Boards. Experienced in SMT and PTH rework and touch-up of PCB. Need skills in component bond, component assembly and hardware assembly.
Ability to operate machinery utilized in the PCB area such as the Wave solderer, CS-400, pinning machine and solder fountain.
Ability to perform duties of the conformal coat processes.
Ability to perform duties in module cleaning, potting and testing.
Ability to learn the use of bench top equipment, test equipment, hands tools and computers.
Participate in meetings to determine work priorities.
Commitment to customer and business focus in areas such as quality of work, attendance and productivity. Overtime may be required.
Adherence to company policies such as safety, respect for others, integrity and workplace rules.
Willingness to attend additional training, either OJT or off-site training recommended by the management staff to further personal development.
Printed Circuit Board (Pcb) Designer
The primary end markets for the Company's products are communications and information processing markets, including cable television, cellular telephone and data communication and information processing systems; aerospace and military electronics; and automotive, rail and other transportation and industrial applications. Amphenol Corporation is proud of our reputation as an excellent employer. Our main focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies.
Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business.
Printed Circuit Board (PCB) Designer Location: Nashua AICC, a division of Amphenol, is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEM's globally. Our global headquarters are located in Nashua, NH and we have design, sales and manufacturing locations globally.
We are currently seeking a Printed Circuit Board (PCB) Designer to join our team. The position will be located in Nashua, NH. RESPONSIBILITIES: 1.
Uses computer assisted design/drafting for Printed Circuit Boards (PCB). Cadence Allegro strongly preferred. 2. Creates and revises production drawings (detail and assembly drawings). 3. Utilizes knowledge of dimensional tolerancing, PCB manufacturing capabilities and design for manufacturing checks. 4.
Resolve technical responses from PCB manufacturing deviations. 5. Updates Customer Application notes and Engineering Standards. 6. Sets up and maintains an organized file system for production drawings. 7.
Communicates with Electrical, Mechanical and Process engineering regarding new and revised designs. QUALIFICATIONS: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year of related experience and/or training; or equivalent combination of education and experience.
Additional skills include technical capacity, communication proficiency, problem solving/analysis and the ability to collaborate as a member of a team. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/ Gender Identity or National Origin For additional company information please visit our website at www.amphenol-icc.com Click here to apply.
Printed Circuit Maker Sr
Description:Sets up and fabricates printed circuits and circuit boards. Performs all operations as directed from engineering drawings, diagrams, and general instructions to cut, shear, etch, plate, expose, drill, and clean complex circuit boards to close tolerances.
Applies enamels, laminates, chemical solutions, and acids as necessary. May perform cutouts and touchups on circuit board materials such as copper-faced plastic, fiberglass, or epoxy board. May install brackets, eyelets, and terminals.
May monitor and verify quality in accordance with statistical process or other control procedures. Manufacturing Self Inspection (MSI) is performed on all production tasks performed.
Experience within wet chemical process areas is required. Experience with SAP operating system, an ability to read engineering drawings, a strict adherence to process procedures all a must. The ability to perform simple manual tasks which include pushing, lifting and moving product are necessary.
Experience in the aspects of Developing, etching, and stripping processes of PWB manufacturing.
Wet chemical processes
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Join us at Lockheed Martin, where we're engineering a better tomorrow.
Boston Whaler Hull/Sp Lamination
It is our people behind life's passions who will make the big difference. If you are interested in becoming part of a company that delivers market leading products, driving your own career and working with brands committed to active lifestyles, then you've found your fit.
Have what it takes? Join us.
- Laminator Profile
Want to join a winning team? Boston Whaler is expanding, and we're looking for the best and most dedicated people to join our team. We are seeking highly motivated individuals, with a great attitude. Prior experience is not mandatory, but preferred. If you are eager to learn a new trade and like being challenged this position is right for you. We offer very competitive pay, an outstanding health and financial benefits package, bonuses, tuition reimbursement, and the opportunity to build your career with Boston Whaler.
Performs elementary and routine mix and lay-up of composite materials, fiberglass, resins, and catalysts onto mold surface using various hand tools
Works with various resins, gel-coats, fiberglass materials, foam, and structural adhesives
Installs wood and other components into fiberglass hulls, decks, and small part molds
Operates a variety of power tools including but not limited to saws, drills, grinders, and overhead hoists
Locates parts by hand or by utilizing detailed blueprints, work instructions, tools, and/or fixtures
Sanding of fiberglass hulls, decks, and small part molds.
Personal Protective Equipment (PPE) requirements include respirators, gloves, chemical resistance aprons, and chemical resistant suits.
Have the ability and desire to work in a hot and humid work environment especially in the Florida summer.
Ability to work a 10+ hour shift standing, bending, reaching. As well as, climbing on and through stairs, molds, and staging throughout the duration of your shift.
Moderate lifting ability up to 50 lbs.
Ability to work in a non-climate controlled environment. The work location may be above 100 ambient degrees or below 10 ambient degrees in areas of production.
Ability to work in a fast paced, noisy environment
Have the flexibility to work overtime both planned and unplanned to meet company goals.
Knowledge, Skills and Abilities Required
Must follow all safety standards and procedures; including chemical handling standards and Personal Protective Equipment
Must adhere to all quality standards and adhere to new standards as processes evolve
Must demonstrate record of dependability and reliability with prior work or professional experience
Must demonstrate the ability to work well with teams professional or otherwise
Understand and follow verbal and written directions
Ability to read and understand blueprints
Ability to use hand, battery, and pneumatic tools
Ability to work in close proximity to co-workers and work in areas with limited space
Skills in forklift, overhead hoist, computer, fiberglass and/or gel-coat applications preferred
High school diploma or GED required
Shift: Must have the availability to work one or more of the shifts described below. Overtime may be required based on scheduling needs. Boston Whaler reserves the right to adjust shifts and work times as business needs evolve.
Day Shift: 5:00am -- 3:30pm Monday – Thursday
Night Shift: 5:00pm -- 3:30am Monday – Thursday
An hourly premium shift differential is available for employees working night shift.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; and toxic or caustic chemicals. The noise level in the work environment is usually moderate.
About Boston Whaler:
For 60 years, Boston Whaler has been building superior quality unsinkable runabouts, cruisers, and center console boats. Headquartered in Edgewater, FL, the company's unique foam-cored construction process contributes not only unsurpassed flotation, but superior ride characteristics, safety, and durability. The current product line ranges from 11- 42 feet and is distributed around the world by a network of exceptional dealers. Boston Whaler is owned by Brunswick Corporation, the largest marine manufacturer in the world. For more information about working for The Unsinkable Legend, visit www.bostonwhaler.com/careers
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, and protected veteran status.
Brunswick is proud to be named a 2018 Top 100 Military Friendly Employer by GI Jobs!
Veterans and Reservists strongly encouraged to apply!
We are the people behind life's passions.
Brunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: firstname.lastname@example.org or 1-888-735-4767.
Equal Opportunity Employer: Minorities/Women/Protected Veterans/Disabled
EEO is The Law - click here for more information
Brunswick and Workday Privacy Policies
#Brunswick Corporation - Boston Whaler
Lamination Operator - 3Rd Shift
Laminator lays-up I/L cores with pre-preg and copper foil. Utilizing heat and pressure the booked I/L cores are pressed to form a panel. Under close to minimum supervision, depending on assigned job level and skill capability, the Laminator by applying one or more lamination skills will be able to process panels through the lamination operation per the designated Manufacturing Process Procedures. Lamination skills are: flash route, breakdown, lay up, material preparation, and lamination press. Must be eligible to work on defense and satellite programs subject to ITAR Regulations. Therefore, candidates must be a U.S. Citizen or a U.S. Permanent Resident ('Green Card').
Duties and Responsibilities:
- Material Prep: The material prep process is preparing all materials to be used in the lay-up process.
Process panels per Lamination MPP:
Monitor humidity in material prep room
Verify requirements of incoming materials to package label
-(Vendor, correct material, lot number, proper marking, thickness, size)
Monitor accuracy of materials inventory
Monitor usage of material by shelf life
Cut Prepreg, caps, copper foil, and tedlar as required
Drill lay up holes as necessary
Lay-up: Lay-up is the process of layering ("booking") the detail with the prepreg and the copper foil to create a book that will be placed in the lamination press.
Process panels per Lamination MPP:
Verify that all necessary materials are available prior to start of job lay-up
Lay-up panels per lay-up sheet and traveler
Verify bake cycle of details prior to lay-up
Clean caul plates with Time Saver
Monitor to insure uniform and constant flow of work through area
Verify humidity of lay-up room
Measure thickness of finished panels
Breakdown: The breakdown process is the final step after lamination to clean and prepare the panel for the next process.
De-pin and breakdown books
Clean resin from tooling holes, move to flash route for route after lamination
Measure panel thickness using micrometer
Brush panels for particles
Lamination Press: In the pressing stage the books are placed into the lamination press and subjected to extreme heat and pressure. When subjected to heat and pressure in the lamination cycle the resin in the prepreg softens, flows, and becomes an adhesive. When cooled, bonding of the copper foil, details, and prepreg form a panel.
Process panels per Multilayer Lamination MPP:
Verify press calibration
Verify proper vacuum pressure of press
Assure proper placement of books in press
Verify temperature and cycle time per traveler
Monitor to insure uniform and consistent flow of work through presses
Able to understand and follow daily work direction and process instructions from supervisor or other qualified person in English
Ability to understand and follow posted procedures
Ability to understand and follow all safety codes
Must be able to communicate fluently in English, including basic reading and writing
Attention to directions and ability to focus on details
Must be able to regularly lift 50 pounds and carry materials
Must be able to stand for 8-10 hour shift
This is a drug-free facility; All candidates must be able to pass a drug test
Education and Experience:
0-2 years of relevant experience
Previous PCB experience preferred
Previous PCB lamination experience highly desired
Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!