Lathe Tender Job Description Sample
Automation Machine Tender
Redefining Excellence In:Medical Device Reprocessing. Endoscopy Procedure Products and Infection Prevention and Control
We are a leader in the design, development, manufacture and sale of medical devices critical to endoscopy and infection prevention and control. Our Endoscopy segment provides a full circle of infection prevention solutions through a comprehensive offering of MEDIVATORS® branded products and services in two critical areas – endoscope reprocessing and endoscopy procedure products. Our endoscope reprocessing products include a full range of endoscope reprocessing systems, high-level disinfectants and sterilants, detergents, leak testing and manual cleaning products, storage cabinets, endoscope process tracking and related consumables, accessories and supplies.
Our endoscopy procedure products include CO2 and water irrigation pumps and disposable procedure kits, sterile irrigation tubing and single-use valves designed to eliminate the challenges associated with proper cleaning and high-level disinfection of numerous reusable components used in GI endoscopy procedures. We design, develop and manufacture most of our endoscopy products.
Job OverviewUnder general supervision and guidance from Automation Team Leads, Shift Supervisors, and Technicians the Automation Machine Tender supports the operation of the Automation equipment. The machine tender is responsible to start and stop the equipment and tend to routine equipment alarms and faults. The Automation Machine Tender is very aware of safety procedures and strictly adheres to all safety, manufacturing, Quality and Continuous Improvement policies and procedures. The work performed is fast paced requiring movement from station to station for the majority of hours worked. Firm or fine grasping or manipulation with both hands is required. Performs quality assurance analysis during machine operation to prevent defective product from being produced and potentially reach the end user. Supports the Water Spiders daily with ensuring material flow and material traceability remain in control at all time. Main Responsibilities
Start and stop the equipment and tend to routine equipment alarms and faults
Maintain and follow 6S (Workplace Organization Standards).
Follow Standard Operating Procedures, Manufacturing Procedures, and other regulatory requirements at all times.
Work in a fast-paced environment communicating and interacting with automated equipment and other team members during the work period
Produce product that meets quality expectations
General cleaning as needed: Keep equipment clean and free of misc. parts, empty trash, clean work area daily, clean shop equipment, sweep, mop, wipe down area
Perform Water Spider duties and support other water spiders with material handling and work order change overs
Supports the automation technicians to ensure targets for safety, quality and productivity are met or exceeded
Must be a team player with strong communication skills
Works in a team environment with all levels of the organization
Attend daily production meetings and shift hand off meetings to ensure good communication and pass downs
A high level of engagement is expected; this means that Machine Tenders are expected to work on improving themselves by working on training applicable to their position.
Engagement on 7 steps, and improvement events is expected so that the Machine Tender can provide input to implement containment actions and countermeasures to resolve quality, or process issues.
May be asked to perform other tasks as required.
Education- High School Diploma, GED or equivalent is requred.
Minimum of six months of related manufacturing experience
Must be able to read, speak, and write English and be able to perform basic math functions
Must be able to carry products weighing 25 to 40 lbs on an occasional basis.
Must be able to work on their feet and be able to twist or turn the body continuously through the day.
Must be able to reach shoulder height continuously.
Job requires repetitive movement of both hands continuously, six to eight hours daily.
Cantel Medical company is an Equal Employment Opportunity/Affirmative Employer. Women, minorities, veterans, and individuals with disabilities as well as other qualified individuals are encouraged to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin or other protected class status.
NKDC is seeking a detail-oriented, reliable problem solver with excellent customer service, and product knowledge to join its retail cannabis dispensary team. Must be a hard-working team player, with excellent people skills and ability to communicate warmly and professionally in both verbal and written form.
Must have open availability with excellent punctuality, work ethic, and professionalism. Must be familiar with operation of retail P.O.S. systems, have good cash handling skills, and be able to perform accurate cash drops and balancing at the end of day. Must demonstrate follow-through with assigned tasks and ensure completion in a timely manner. Must have skills in retail merchandising, ability to create attractive displays with appropriate signage, and maintain strict inventory controls.
High School Diploma or GED equivalent. Extensive knowledge of product and experience with the cannabis industry.
Retail experience, excellence in customer service, and computer skills required. Must be 21. Musty have reliable transportation.
*Cannabis strain knowledge *Working toward or able to obtain: Medical Marijuana Consultant Certification *Previous I-502 industry experience, training or education *On-line marketing, social media and website update capabilities preferred
While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel. The employee frequently is required to stand, reach with hands and arms and talk or hear.
The employee is occasionally required to walk, sit, climb or balance, and stoop, kneel, crouch or crawl and may be called upon to do so for extended periods of time. The employee must be able to use tools effectively and occasionally lift and/or move up to 50 pounds. Specific vision, depth perception and ability to adjust focus. Employee is required to stand throughout the duration of their daily work shift.
Qualified applicants must be able to pass a drug screening (excluding marijuana), a background check for the desired position, and to obtain and maintain any additional licenses and certifications as needed to successfully fulfill the required job duties.
Title: Roll Tender
Job ID: 616
Lancaster, PA, US, 17601
Category: Manufacturing -- Other
Donnelley Financial Solutions (NYSE: DFIN) provides software and services that enable clients to communicate with confidence in a complex regulatory environment.
With 3,500 employees in 61 locations across 18 countries, we provide thousands of clients globally with innovative tools for content creation, management and distribution, as well as data analytics and multi-lingual translations services. Leveraging advanced technology, deep-domain expertise and 24/7 support, we deliver cost-effective solutions to meet the evolving needs of our clients.
Load rolls of paper onto automatic splicing unit of web offset printing press. Inspect rolls of paper for blemishes or tears and cuts away damaged area with knife.
Roll paper into loading position on automatic splicer, insert shaft of automatic splicer through roll core, secure holding chucks of automatic splicer to shaft ends, and thread paper through press components to prepare press for printing. Apply adhesive strip to backup roll and insert backup roll onto automatic splicing unit of press to prepare paper for automatic splicing. Remove roll of leftover paper from press after automatic splicing.
May operate mechanical truck to transport rolls of paper to press area. May assist with some of the make-ready tasks associated with the type of press operated such as hanging plates, examining plates, prepping and installing blankets, adjusting tension etc. May clean press and clean and install press components to maintain press in working order. May prepare and Prepares and loads flat stock into a sheet fed press.
This is a 2nd shift position.
See job responsibilities detailed in the job description.
Requires general knowledge of offset presswork procedures and materials. Ability to read and follow job specifications to determine materials needed to run the job successfully.
Ability to make adjustments to auto splicer. Knowledge to load paper and prepare slice for continuous operation of the press. Knowledge of materials and requirements for press.
General Education and Work Requirements
Education Level Little formal education
Reasoning Apply commonsense understanding to carry out detailed but uninvolved written or oral instructions. Deal with problems involving a few concrete variables in or from standardized situations.
Mathematics Able to read, copy and record figures. May involve simple addition and subtraction
Language Reading: Able to follow simple work instructions.
Recognize meanings of two or three syllable words. Able to compare similarities and differences between words and between series of numbers. Able to speak simple sentences, using normal word order, and present and past tenses.
Specific Vocational Prep Over 6 months up to 1 year
Personal Protective Equipment over 2/3 of the time
The duties and responsibilities described above are the essential functions of the job.
It is the policy of Donnelley Financial Solutions to select, place and manage all its employees without discrimination based on race, color, national origin, gender, age, religion, actual or perceived disability, veteran's status, actual or perceived sexual orientation, genetic information or any other protected status.
If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access jobs.dfsco.com as a result of your disability. You can request a reasonable accommodation by sending an email to AccommodationRequests@dfsco.com.
CNC Lathe Operator
Excellent Direct Hire opportunity for a CNC Lathe Operator in the Dayton, OH area!
- Setup and operate CNC lathes to produce parts to the customer’s and company’s specifications
- Read and comprehend blueprints in accordance with GD&T (geometric dimensioning and tolerancing) standards
- Dry-run new programs, complete first article inspections, and inspect all parts in accordance with a quality plan
- Follow job travelers and setup procedures to maintain efficient and cost-effective operating procedures
- Load material in machines with proper orientation in a safe manner according to company operating procedures
- Use precision measuring equipment such as micrometers and calipers to inspect machined parts for conformance to drawings and specifications
- Use company in-process inspection plan to detect defective features in a cost-effective manner
- Setup and perform related operations such as milling, drilling, and deburring
- Monitor tool wear and replace as necessary
- Accurately complete applicable job travelers and inspection reports
- Operate machines in a safe manner at all times, according to machine manufacturer and company procedures
- Keep area clean and orderly
- High school diploma or equivalent
- 3+ years’ experience operating CNC lathes
- Experience with Mazak machines and controls is a plus
- Ability to establish priorities and work independently with minimal supervision
- Knowledgeable of basic G&M codes, and ability to read and edit G code programming
- Ability to gather, inspect, and install proper tooling, cutting inserts and work holding devices according to company setup instructions
- Ability to identify and adjust proper machine offsets
- Ability to proficiently use precision measuring instruments and industry standard gaging, such as micrometers and calipers
- Ability to multitask; perform, monitor, and inspect multiple processes simultaneously.
- Ability to independently identify and troubleshoot undesirable machine outputs including, but not limited to nonconformances, chatter, and excessive tool wear
- Ability to read and interpret drawings with standard geometric dimensioning and tolerancing symbols
- Basic understanding of fractions and decimal equivalents, with the ability to perform mental math
- Knowledge of basic hand tools and how to use them in a safe manner
- Reading comprehension; understanding written policies, best practices, and work instructions
- Ability to lift up to 20 pounds on an occasional basis
- Ability to see up close and have accurate depth perception
CNC Lathe Operator - 1St Shift
- Maintain the highest level of quality control per ISO standards
- Troubleshoot machine and tooling problems to keep scrap and rework to a minimum
- Perform inspections with required tools per the IPI
- Set up and operate conventional, special purpose and numerical control machines and machining centers
- Study prints, sketches and drawing, manuals, specifications or sample parts to determine dimensions and tolerances of finished piecework
- Calculate and set controls to regulate machining factors such as speed, feed coolant flow, and depth of angle of cut or enters commands to retrieve , input, or editcomputerized machine control media as required
- Adjust the machines to the speed
- Change tools as required or directed
- Communicate problems to the shift supervisor and/or machinists from other shifts
- Record job issues on the Production Control form
- Complete Job Cards daily for all work performed
- Perform program off sets as required
- Maintain and secure work tools per our tool requirements
- Perform preventative and predictive maintenance on machinery
- Clean and maintain work area
- Turn off and lock out equipment when not in use when applicable
- High School Diploma or GED required
- Certificate or Degree from a trade school a plus
- Basic reading, writing, and some advanced arithmetic skills required
- Experience using one or more of the following tools: lathe, milling machine, drill press, and vertical/horizontal cut off saw
- Ability to read and interpret blueprints and routing
- Knowledge of Geometric tolerances
- Manual dexterity required for operating machinery and computers
- Advanced skills (Journeyman level) require programming knowledge
- Job setting experience
- Ability to lift 50 lbs frequently
Load rolls of paper onto automatic splicing unit of web offset printing press. Inspect rolls of paper for blemishes or tears and cuts away damaged area with knife. Roll paper into loading position on automatic splicer, insert shaft of automatic splicer through roll core, secure holding chucks of automatic splicer to shaft ends, and thread paper through press components to prepare press for printing. Apply adhesive strip to backup roll and insert backup roll onto automatic splicing unit of press to prepare paper for automatic splicing. Remove roll of leftover paper from press after automatic splicing. May operate mechanical truck to transport rolls of paper to press area. May assist with some of the make-ready tasks associated with the type of press operated such as hanging plates, examining plates, prepping and installing blankets, adjusting tension etc. May clean press and clean and install press components to maintain press in working order. May prepare and Prepares and loads flat stock into a sheet fed press.
Requires general knowledge of offset presswork procedures and materials.
Ability to read and follow job specifications to determine materials needed to run the job successfully.
Ability to make adjustments to auto splicer.
Knowledge to load paper and prepare slice for continuous operation of the press.
Knowledge of materials and requirements for press.
Job requires ability to exert in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently, and/or in excess of 20 pounds of force constantly to move objects.
Tender Application Specialist II
Handles technical and commercial Insides Sales and Customer Service functions for assigned account responsibilities which include direct customers, distributors and resellers. Receives, evaluates and processes inquiries and purchase orders in to ensure accuracy against customer requirements based upon agreement guidelines and / or guidance from Direct Sales personnel. Interfaces daily with Sales, Product Managers, Engineering, Operations, Production, Planning, Procurement, etc. to ensure accurate and timely information is obtained to meet job duties. Provides after sale support by performing such duties as creating credit and debit memo's, Return Material Authorizations (RMA's), and additional activities as requested by clients. Provides order status updates as requested by customer.
This position deals primarily with products in the Measurement Solutions product portfolio and 3rd part ancillary products. Generates quotes and proposals, and processes orders from customers/distributors/end users based on standard departmental and SAP procedures while ensuring compliance to customer requirements
Works with little to no direct supervision of manager and/or peers to ensure policies, procedures and guidelines are followed in the timely and accurate completion of quotations and sales orders
Has obtained or can demonstrate a minimum Level II Competency in all relevant areas (i.e. SAP S&D module and core products)
Has a working or intermediate knowledge of fiscal measurement principles, technologies, applications and industry standards
Has a minimum level II competency of SAP or related MRP system and uses said knowledge effectively, making sure that all information required for order entry and quote preparation is entered accurate and timely
Can support colleagues to answer technical product, application and SAP related questions to assist in completion of daily tasks
Ensures orders are entered into SAP with correct information including correct amount, billing details, required documentation, end destination, market segment, and all the other fields that are required for order processing and data collection
Responsible for compiling complex tender and order documents, working with internal and external resources to coordinating information and ensure customer specifications are thoroughly reviewed and subsequent quotations/orders are completed in accordance with customer specifications, documenting and relaying any required deviations
Communicates proactively with sales personnel, customers, distributors, and end users to understand and meet customer's requirements for the quotes/proposals that are produced. This may include but is not limited to such communication as missing requirements, requesting additional information, providing cost/margin calculations to TFMC sales, lead times, etc.
Develops and maintains a professional relationship and acts as a key contact for assigned customer
Prepares BCQ forms, and quotation approval documents ensuring the correct authorization and signature workflow is respected, and keeps them in the individual order and proposal records
Follows all applicable company policies and procedures.
B.S. in related field Degree in Business, Engineering, Industrial Engineering/ Technology or other technical field or equivalent commercial experience.
Experience in related functions like applications, inside sales, engineering, project management or manufacturing (in oil and gas industry preferred).
Must have knowledge of manufacturing processes and exposure to cost accounting principles in order to understand key cost drivers for assigned product lines.
Detail oriented, analytical with ability to determine customer applications needs. Exceptional time management and organizational skills.
Working knowledge of Microsoft Office products and SAP Business System (or experience with other ERP system).
Demonstrated written and verbal communication skills (technical writing skills is a plus).
Excellent interpersonal skills.
Must be able to handle multiple tasks in a changing, fast-paced work environment.
SUMMARY: Provide Spectacular Service while having positive and knowledgeable interactions with customers. Focus on Customer Service and information sharing.
DUTIES: Completes retail sales transactions (credit card and point of sale) in compliance with established policies and procedures.
Possesses a strong level of telephone etiquette. Demonstrates knowledge of cannabis products and strains to include Sativa, Indica and Hybrids. Provides recommendations regarding appropriate usage and dosage based on method of consumption.
Updates management regularly on customer buying patterns and interactions. Demonstrates an understanding of regulatory compliance and upholds all policies and procedures unique to the industry. Actively promotes spectacular customer service and aides in creating a welcoming atmosphere.
Promotes a professional demeanor in all interactions and transactions. Responds to guest's questions regarding flowers, strains, creams, oils, waxes, concentrates, edibles, tinctures, vape/e-pens. Stocks product.
Actively identifies areas for cost savings. Responsible to maintain a safe environment for guests and colleagues. All other duties as assigned.
QUALIFICATIONS: Must be 21 years of age and possess a valid State of Washington Driver's License.
Experience and/or education in the cannabis industry to include store product knowledge. High school diploma or GED, required.
Central Melt Metal Tender
Who we are and what we do:
Pace Industries is North America's leading full-service die casting manufacturer. Our mission is to provide uncommon, creative die casting and support solutions that contribute to the success of our customers. Our die cast parts are used in automobiles, motorcycles, generators, snow mobiles, lawn mowers, washing machines, power hand tools, BBQ grills, commercial lighting and many other well-known products. You can have a significant impact on our cultural transformation.
The Harrison Division started as a small die caster in the mid-1960's serving a variety of niche markets. Since then, we have become a recognized industry leader in thin-wall die castings while also serving more traditional die casting applications. With more than 600,000 square feet of manufacturing and warehouse space, we have the size and capability to serve a wide variety of customer needs.
Employees are required to maintain molten metal supply in the melt room and holding furnaces at the die cast machines safely and efficiently to support the production requirements and to assure the proper alloy is provided for the parts being cast.
Duties and Responsibilities:
Keep the holding furnaces on the die cast machines full of proper alloy of metal and at proper temperatures. This process, called hauling metal, must be done in a safe, efficient, and timely manner as to keep production running at all times while minimizing costly mistakes such as overfilling furnaces, overfilling ladles, spilling metal, letting furnaces run too low on metal, mixing alloys, etc.
Keep transfer (bull) ladles properly cleaned and heated.
Keep scrap hoppers emptied and identified.
Daily chipping, cleaning, fluxing, and skimming of breakdown furnaces. This also includes Striko Holding Furnaces.
Keep alloys separated. This applies to all metal including that which is stored, in any furnace, or in scrap form.
Cold clean and repair of breakdown furnaces. This includes jackhammering, cleaning, forming, ramming, casting, painting, etc.
Charge metal to breakdown furnaces in such a way as to keep them full of the proper alloy metal and at the proper temperatures. Metal is charged in form of sows, ingots, castings, and ingredients.
Routine and proper cleaning of all die cast holding furnaces.
On Striko Furnaces clean fill funnels and pouring spouts. Coat as needed.
Keep area around furnace clean.
Perform alloy changes in any furnace properly.
Run spectrometer including cleaning, profile, standardization, and routine analysis.
Properly handle all department paperwork including labor cards, production sheets, check sheets, metal hauling sheets, barcodes, audit logs, furnace cleaning sheets, scrap cards, flux/dross cards, etc.
Properly handle paperwork, sampling, and barcoding of all incoming metal/materials.
Daily inspection paperwork and safe driving of forklifts.
Keep all melt rooms and work areas clean as well as tools/supplies neat and organized and put in proper locations.
Work in a safe manner and report unsafe conditions/hazards immediately.
Wear required personal protective equipment.
Capable and willing to work overtime.
Participate in training programs deemed necessary by the company.
Perform other associated duties, functions, or work as needed or assigned to continue the productive operation of the company.
Must follow all safety rules and policies as set forth by OSHA guidelines and Pace Industries policies and procedures as outlined in the employee manual.
High School Diploma desired and some vocational training preferred
Must be able to read and understand written directives.
The predominate forms of instructions are written, visual, and verbal.
Forklift certification required.
This is a physically demanding position requiring moderately heavy lifting and working in a hot environment.
Must follow all safety rules and policies as set forth by OSHA guidelines and Pace Industries policies and procedures as outlined in the employee manual.
Please note that the duties and requirements described herein are intended to represent general contents of this job. This is not to be construed as an exhaustive statement of duties and responsibilities.
Pace Industries has a strong commitment to the principle of diversity, and in that spirit, seeks a broad spectrum of candidates including women, minorities, veterans, and people with disabilities. Individuals with disabilities desiring accommodations in the application process should notify the hiring department by the application deadline.
Machinist Manual Mill & Lathe
Machinist Manual Mill & Lathe
1st Shift M-F
$17.00 - $22.00
An Industrial Tool Repair Shop in Griffin, GA is looking for an experienced Mill & Lathe Machinist.
Duties to include but not limited to:
Set-up and run various machine tools on a manual lathe
Ensure all parts produced meet specs of print using proper measurement tools
Ability to work within very close tolerances
Must be able to read and understand drawings and handle measuring equipment
Read and follow drawings & job tickets
Perform routine machine maintenance
Load and indicate part to fixture
Monitor tool wear, load tools and inserts as required
Required knowledge, skills and abilities
Must have an excellent work ethic & be willing to work overtime
Have the ability to stand for long hours, work in a fast-paced environment, and meet time deadlines
MUST have knowledge of manual lathe machines
1-20 years as a manual machinist
Experience handling large, heavy parts as well as smaller components
Only applicants that meet the required skills and experience will be considered at this time.
The #1 skill required for this position is the ability to carry out instructions in written, oral, schedule, or diagram form.
Health, Dental, Vision, & Life Insurance
401k Retirement Plan
Flexible Medical Spending Account
Reply with your resume to begin the interview process at:
Salary: $17.00/hr - $22.00/hr
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!