Laundry Bag Punch Operator Job Description Sample
Bag Fabrication Operator (Nights)
PURPOSE AND SCOPE: The Solution Bag Fabrication Operator is responsible for promoting a safe and efficient manufacturing environment within the Bag Room area of the Solutions Department. Operator is responsible for set up and operation of bag manufacturing equipment, and inspecting materials and product to ensure that they are acceptable for use in production.
PRINCIPAL DUTIES AND RESPONSIBILITIES:
Under general supervision, follows established company policies and procedures and applies acquired job skills to perform all in-process testing and documents results on the Batch Production Record (BPR).
Escalates issues to supervisor for resolution, as deemed necessary.
Ensure that new employees are properly trained before performing any tasks.
Prior to the start of each lot, perform the following:
Obtain the BPR from the staging area and verify the product code and lot number
Perform area clear to ensure that all components from the previous lot have been removed.
Ensure product board reflects current lot.
Checks all production materials to be sure they are correct, labeled and staged following first in first out policy.
Ensure that all process equipment is calibrated and operating in validated parameters.
Verify that sample bags are within all parameters.
Perform the bag fabrication process and inspects finished bags for visual and functional defects according to applicable Standard Operation Procedures (SOPs).
Compile the BPR and accurately complete all required information.
Identify any factors that affect performance. This may include personnel issues, equipment failures, inefficient processes, etc. Reports all such problems to management and recommends steps to alleviate problems and increase efficiency.
Work safely at all times.
May provide assistance to junior staff with more general support tasks that require a better understanding of functions, as directed by immediate supervisor.
May refer to senior staff for assistance with higher level problems that may arise.
Assist others to promote teamwork and cooperation.
Review and comply with the Code of Business Conduct and all applicable company policies and procedures, local, state and federal laws and regulations.
Assist with various projects as assigned by direct supervisor.
Other duties as assigned. Additional responsibilities may include focus on one or more departments or locations. See applicable addendum for department or location specific functions.
PHYSICAL DEMANDS AND WORKING CONDITIONS
The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to be on feet for 12 hour shifts, wear personal protective equipment that may include hair net, Solution bunny suit. The employee is frequently required to stand; walk; use hands and fingers, handle or feel, and reach with hands and arms. The employee is occasionally required to sit; stoop, kneel, or crouch and talk or hear. The employee must frequently lift and/or move 10 to 25 pounds and occasionally lift and/or move up to 50 pounds.
While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate.
Donning/ Doffing is required.
The Fresenius Knoxville Mfg. Plant is a smoke free campus and maintains a smoke free environment in accordance with state law and company policy.
- High School Diploma required
EXPERIENCE AND REQUIRED SKILLS: + 1 – 2 years’ related experience.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity
Bag Machine Operator
Job Description Quickly apply for consideration, then check your email for our official application! Starting at $14.27/hr with $.40 shift differential, for a total of $14.67!
Work 7pm to 7am only 3 days one week and 4 days the next week! The Bag Making Machine Operator is responsible for operating Machines which convert printed and unprinted semi-finished film into bags according to customer specifications. Operate bag machine equipment in a safe manner.
While performing all job duties, safe work practices must be maintained at all times. Wear all required PPE. Inspect bags for defects and quality issues.
Fold cartons, load rolls of film, change rolls of tape, and setup orders on machine. Operate a hoist/use the strap in safe manner Maintain product quality and standards, send bag samples when required. Record all measurements on production paperwork and test results on tester paperwork.
Perform clearance work on tagged cartons. Notify area supervision when machine is down for 15 minutes or more due to mechanical and/or quality issues. Report all unsafe operating conditions on the bag machine, or tester, to the Finishing Area Supervisor.
Understand and follow all JSA-s, and Product Safety guidelines. Understand and follow Good Manufacturing Practices (GMPs). Understand and maintain Global Food Safety Initiatives (GFSIs) Understand and follow cleaning schedules, (including vacuuming, sweeping, and cleaning hot water tanks) keep work area neat and clean. Relieve other machines for breaks and meetings.
May have to run 2 machines depending on production needs. On occasion, job duties other than those specifically listed above will be assigned
Requirements High school diploma or GED NOT required Experience in a manufacturing facility and/or as a Machine Operator a plus
Highlights Kelly offers benefits! 401k Insurance including medical and dental PerkSpot discounts on your favorite brands ...and more!
? At Kelly Services ® , we work with the best. Our clients include 95 of the Fortune 100 ™ companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly.
® As a workforce advocate for over 70 years, we are proud to directly employ nearly 500,000 people around the world and have a role in connecting thousands more with work through our global network of talent suppliers and partners. Revenue in 2016 was $5.3 billion.
Visit kellyservices.com and connect with us on Facebook , LinkedIn and Twitter . Kelly Services is an equal opportunity employer including, but not limited to, Minorities, Females, Individuals with Disabilities, Protected Veterans, Sexual Orientation, Gender Identity and is committed to employing a diverse workforce. Equal Employment Opportunity is The Law. at https://www.dol.gov/ofccp/regs/compliance/posters/ofccpost.htm
Bag Machine Operator
Zenith Specialty Bag, Co., Inc. is seeking bag machine operators for their 2nd and 3rd shifts. Experience with a Beasley-French, Weber, Holweg, Garant, or Triumph a plus, but if you are mechanically inclined and have a manufacturing background please apply. Envelope making machines would be helpful.
- Must be available to work occasional weekends, and/or mandatory overtime when needed.
- Must be able to stand for long periods of time and change positions frequently.
- Must be dedicated, hardworking and reliable.
- Must be able to lift 50 lbs. on a regular basis, to and above shoulders.
- Must be able to sit, crawl, squat, push, pull and work at below and above shoulder height.
- Must be safety conscious and be able to follow all safety rules and policies. Safety is a huge part of our program here at Zenith.
- Bilingual English/Spanish a plus.
Positions available are on 2nd and 3rd.
Benefits: Vacation, Sick Days, Medical, Dental, Vision, Life Insurance and Profit Sharing.
This position pays depending on experience. Emails without a resume will not be considered.
Industry, CA 91748
Bag Line Operator
Delta McKenzie - best of both worlds. Under one roof we have the two longest existing target brands in the world.
Collectively Delta and McKenzie share almost 60 years of experience helping archers and bow hunters to have greater success afield.Our facility in Dike, IA is adding a Bag Line Operator to our team. We offer: A family friendly four day work schedule of Monday-Thursday, 5am-3:30pm Health, dental, vision, 401k and cafeteria plans Paid holidays, vacation and sick time Employee discounts and more!The Bag Line Operator is responsible for making archery bag targets in a fast paced, assembly line environment.
This includes filling the bag according to the weight specification, operating the press, utilizing a hog ring gun to close the bag, and labeling, boxing and palletizing the finished product. Other requirements include: Ability to lift an average of 35-50 lbs frequently unassisted and up to 70 lbs occasionally, assisted.
Stand for long periods of time (10 hours per day) Operate a pallet jack following training Understand and follow all required work instructions, including safety policies For more information, or to apply now, you must go to the website below. Please DO NOT email your resume to us as we only accept applications through our website.https://www.applicantpro.com/j/712861-24424
Bag Machine Operator - 2Nd Shift - Flexo
Bag Machine Operator
A flexible packaging manufacturer is seeking to fill the position of an Auto-Wicketer Bag Machine Operator at its suburban Chicago facility.
• Operate complex bag machine.
• Troubleshoot and make minor adjustments to machines.
• Clear machine jams and report malfunctions to supervisor.
• Complete necessary paperwork
• Use measuring devises
• Conduct quality checks and identify product that fails to meet quality standards and customer specifications.
• Helps ensure all policies and procedures for the company and the American Institute of Baking (AIB) are followed
• Perform other related duties to contribute to the success of the operation as assigned by management
• Experience Preferred - willing to train the right candidate
• Able to interact and communicate with other operators
• Organizational skills
• Safety knowledge
• Mechanical aptitude is desired
• Must be able to stand for extended periods of time and lift 50 pounds
*Salary for this position is determined accordingly with candidate’s current salary, experience, and qualifications and may be somewhat flexible based on criteria of ideal candidate.
Equal Opportunity Employer with a generous benefits package that includes health, vision, dental, life/long and short term disability insurance, paid vacation and holidays, 401K, service recognition program, tuition reimbursement.
All candidates are pre-screened with a phone interview and undergo drug testing and background testing through an outside company.
Hot Punch Furnace Operator
Job Description General
This is a job summary which includes essential job duties of the position. More specific information regarding duties may be provided upon request. In this role the selected person will need to have a good time management skills due to running 4 furnaces at once. The selected person will need to be able to work in a team environment and have a strong understanding of 5s and TPM. Duties: * Learn to operate multiple pieces of equipment including a horizontal furnance, butt welder, punch press.
Work as part of a team to identify quality and production gaps in the operation of new
Flex hours/schedule as demand dictates
Participate in safety initiatives.
Meet customer quality and production needs.
Utilize SAP for transactions, Inventory control
Willing to cross train on multiple pieces of equipment. Climate: Position requires highly motivated individual that can work in a rapidly changing manufacturning environment. Work is conducted in an environment of management and factory skilled and non-skilled personnel, with special emphasis on practicing team principles.
* Will to be hands on with equipment troubleshooting and process improvements
Good analytical and problem solving skills
Some computer ability
Good mathematical ability Hours:(1) M-F 5p-5a (2) A/B 5a-5p
EEO Statement All qualified applicants to Stanley Black
& Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.
Requisition Number: 49053BR
City:* East Longmeadow
Business:* US - GTS - Hand Tools Accessories and Storage (HTAS)
Punch Press Operator
Run a punch press.
This is a 1st shift position--6 am to 3:30 PM,
This company is ON-THE-BUSLINE.
Some previous experience required.
Punch Press Operator
• Schedule: 2nd shift
• Hours: 3:15pm to 1:45am,
• OT Required:
• Pay rate: $13( no experience but has driven ability to learn)-15 + DOE
• Report to: Curt
• Position Description:
• SUMMARY: Entry level punch press machine operation. Operates a variety of punch press equipment to produce metal parts that meet print specifications. May include basic machine set-up.
• Performs all duties and responsibilities with an emphasis on safety.
• With close supervision, operates most types of punch press equipment, including coil or sheet fed presses and drill presses, by feeding and controlling their operation.
• Receives and works from work orders and prints for each job, using shop calculations/math if necessary, to ensure proper types, quantities and quality of each part are produced.
• Uses a variety of precision measuring and gauging tools to perform part inspections before and during each production run.
• Monitors machines at all times for proper operation.
• Completes all shop traveler and timekeeping documentation as required for each job.
• Continuous learning with regard to machine operation in order to gain skills and proficiency to operate more complicated machines on more difficult work, including machine setup.
• Works with close supervision in coordination with other team members and other departments in the company,
• Maintains regular and timely attendance.
To perform this job successful, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.
Dress Code: Labor work clothing
Requirements for the position:
PMA Test – 80% correct
Submittal Process/Communication Expectations: Submit resume to Curt for review and set up interview
Company Description: Clean, temperature controlled, well lit, louder work environment
Find out how we can cater our services to support you: Take a glimpse into the diverse opportunities we have available.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status.
Award Staffing, Inc. Is a Drug Free Workplace/ EEO employer M/F/Veteran/Disability. Interested candidates, please contact: Award Staffing call: 763-972-4267 or email: firstname.lastname@example.org
Strippit CNC Turret / Punch Press Operator
Precision Sheet Metal Job Shop
CNC Turret punch press operator 5 years minimum experiance
Set up tooling familiar with punch and die clearances
Flat pattern first article inspection
Familiar with shop tools
1St Shift Punch Press Operator - Metal Stamping
Join our team of Metal Stampers at MIRO!
1st Shift Punch Press Operators needed. These are metal punch presses.
Load, Unload, Setup, and Run Punch Presses from 25 ton to 600 ton.
- must own your own basic tools plus caliper, micrometer
- experience in metal manufacturing
- able to lift minimum of 50 lbs regularly
- experienced fork truck operator
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!