Levers Lace Machine Operator Job Description Sample
Machine Operator III - Fin Machine Operator 2Nd Shift
Ensuring Chart's Success…
Chart's manufacturing group is critical to building our products on time and of the highest quality to our customers. The Machine Operator III will work towards our production goals along with peers through the direction of lead man, shift supervisor, and plant manager.
What Your Day-to-Day Activities Will Be…
Candidates will have be running McElroy and Happy fin tube machines
Reads, interprets drawings and written instruction applicable to specific machining process.
Performs set-up and operation as required without supervision.
Performs all required measurements.
Capable of required tool selection for required task.
Trains, or assists in training new employees.
Can safely operate overhead or jib type cranes and rigging.
Performs all non-electrical preventative maintenance as indicated by supervision for specific machinery.
Adhere to all safety guidelines and policies.
Other duties as assigned.
Your Professional Experience Should Be…
- The ability to reading a tape measure as well as blue prints.
Your Education Should Be…
- High School Diploma or Equivalent Work Experience
Your Physical Work Environment Will Require…
While performing the duties of this job, the employee is regularly required to:
Standing for prolonged periods of time.
Occasional repetitive lifting up to 60 lbs as regular daily activities necessitate.
Handle or feel objects.
Tools or controls and talk or hear.
The employee is occasionally required to walk, stoop, kneel, crouch or crawl.
Chart Industries is an equal opportunity employer.
Machine Operator Apprentice
Reports To: Supervisor and Plant Manager
FLSA Status: Non-Exempt
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Responsible for all activities associated with running a Flexo or Rotary Die Cutter including: setup, operation, cleanup, and recommending improvements to operations.
Sets up and runs the Load Former, feeding the machine
Reviews job tickets, print cards, and quality inspection paperwork with machine Captain
Sets up and operates the pre-feeder.
Reads job order and mounts specified rubber print plate and printing dies on cylinder.
Installs cylinder on shaft, and secures assembly in bed of press.
Fills dye fonts with prescribed inks or dyes.
Moves levers to engage dye rolls, adjusting position of cylinder to print two or more colors without overlapping or smearing previously printed area.
Starts press, adjusting speed, tension, and alignment of printing plate as necessary.
Cuts sample of printed material from end of printed roll and inspects for imperfections, such as blurred or off-center impressions.
Cleans rubber plate, cylinder, and dye fonts, using solvent, and lubricates press as needed, using grease gun.
May mix inks or dyes to produce desired colors.
Sets up rails, print, and die cut section on machinery accurately in accordance with proper setup techniques.
Inspects all dies before and after run to ensure that any necessary repairs are made before the next run.
Ensures all bolts for cutting dies are in place and tightly secured.
Monitor box quality, including, but not limited to, loose liner, warp, correct size, and print.
Checks anilox rolls for damage.
Maximizes the utilization of equipment by operating the machinery at available capacity and speed.
Cross trains and assist Helpers, Stackers, and Bundlers with job duties on the machine.
Cross-train on other machines.
Completes necessary reports in an accurate and timely manner, including but not limited to: Production Data,
Machine Operational Status, Safety Data, Quality Data. Turn in maintenance work orders to supervision for needed repairs.
Must be proactive in the maintenance of equipment.
Switches duties with stacker as necessary.
Complies with all company policies and procedures, including safety and maintaining good housekeeping.
Adheres to production schedule. Makes recommendations for optimizing the schedule to meet cost, quality and service goals.
Reports any issues to Supervisor.
Adherence to company policies, including its attendance is essential.
This job has no supervisory responsibilities.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience
One year certificate from college or technical school; or 2-3 to years related experience and/or training. Previous experience in a manufacturing environment or similar industry experience preferred.
Boxes, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Machine Operator - Hourly - All Other States Except California
Machine and Forklift operator! $15.25/hr
Forklift experience beneficial, but not required. We will train on forklift.
Will operate forklift, doff winders, and transport rolls. Candidates need to be able to work 12 hour shifts, days and nights (swing shifts).
Assists the team as needed in the safe and efficient operation of the spunbond lines.
Responsible for the safe and efficient operation of the lift trucks, doffing the winders, wrapping the material, transporting the finished rolls to lag area, and keeping a clean and orderly work area at all times.
Essential Duties and Responsibilities:
Includes the following. Other duties may be assigned.
Observe all departmental safety rules, safe job practices, work rules, company policies and quality procedures.
Inform oncoming "C" Operator of job conditions at shift change.
Refuel the lift truck, inspect the truck, fill out the "Lift Truck Inspection Sheet", drive the lift trucks, take proper care of the lift trucks, and inform the team leader if any problems arise in the area.
Doff the winders and wrap the rolls.
Transport and load all materials produced in Spunbond.
Maintain a clean and orderly work area and to carry out assigned housekeeping duties according to work instructions.
Perform the following routine duties:
Cut production tubes.
Make spaghetti boxes.
Make, monitor, and change edge trim bags.
Remove spaghetti waste from mezzanine
Dispose of spaghetti and web waste.
Blow down needle room.
Handle cake waste.
Lace up spin positions on start-ups or merge changes.
Lock out equipment.
Refuel lift trucks.
Inspect lift trucks.
Remove and install lift truck attachments.
Clean mezzanine during pack life.
Perform inventory control system functions.
Perform housekeeping and TPM activities as assigned.
Share any other additional duties assigned through the team.
Supports and promotes safe practices and environmental commitments in alignment with company commitments, policies, and compliance requirements
To perform the job successfully, an individual should demonstrate the following competencies:
Safety: Observes safety and security procedures. Determines appropriate action beyond guidelines. Reports potential unsafe conditions. Uses equipment and materials properly.
Passion for Results: Displays passion and optimism. Displays respect and trust. Demonstrates persistence and overcomes obstacles. Performs tasks to ensure quality of work and product. Pride and enthusiasm in own results and those of team. Meets commitments.
Integrity: Treats people with respect. Utilizes time efficiently. Upholds organizational values and procedures.
Teamwork: Balances team and individual responsibility. Exhibits objectivity and openness to others' views. Gives and welcomes feedback. Contributes to building a positive team spirit. Puts success of teams above own interests. Able to build morale and group commitments to goals and objectives. Supports everyone's efforts to succeed.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience
High school diploma or general education degree (GED).
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance.
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
Basic computer skills. Interface with computers including controls systems, MES, and SAP.
Certificates, Licenses, Registrations
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently required to stand. The employee is occasionally required to walk and talk or hear. The employee must occasionally lift and or move up to 50 pounds. Specific vision abilities required by this job include color vision.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Apply Not ready to Apply?
CHECK OUT OUR SIMILAR JOBS
Jobs in Greenville, South Carolina
Operator Jobs Greenville, South Carolina
Hydraulic Press Operator - Machine Operator - Mechanic
RHI Magnesita - The driving force of the refractory industry
Our team is currently seeking a skilled professional to support Production and Hydraulic Press Operator for our fast-paced refractory brick operation in York, PA. Our successful team members are self-starters who can work independently without direct supervision. This position runs a heavy tonnage hydraulic press and robotic system that supports the brick manufacturing process. The presses are the first step in creating our molded brick products.
$21.00/HR + $1.50 shift/$1.60 weekend differential
Following a probationary period, our team members can test into advanced pay levels where the average pay for a Production position is: $24.36 + differentials = approx. $55,000/yr
2nd shift or 3rd shift positions are available; our schedules require some scheduled work during weekends.
Work safely in a heavy industrial facility when performing brick processing work. Heavy physical labor is required in this department and safety is our first priority.
Operate heavy tonnage hydraulic press including setting die/mold in place properly, follow press set up instructions carefully and accurately, ensure robotic systems are set up and in good working order, and perform scheduled preventative maintenance on the press or robotic systems as instructed.
Safely maintain a constant rate of production and alert other departments if there is a need for shut down, delay or maintenance on the press.
Follow charts, schedules, data sheets and instructions carefully and accurately for production orders, product specifications, maintenance, systems checks, quality guidelines and data entry into our electronic production management system.
Accurately record production completion times, piece counts, brick weights, and delay times for each shift.
A successful candidate will have experience in the following:
Our most successful candidates have mechanical aptitude and experience. Experience working on mechanical equipment like major auto repairs, motor repair or installation is ideal for this position.
Working in a heavy industrial environment where the assigned duties were in a fast-paced work environment that will be inside or outside in hot, cold and dirty working environments.
Experience working with heavy tonnage hydraulic presses is a plus.
Strong mathematical and mechanical aptitude including the ability to read and understand blueprints or similar schematics.
Strong verbal and written communication skills as we work in teams in this department.
Must be at least 18 years of age; attained a High School Diploma or GED; and strongly prefer training with mechanical systems or motors
from an accredited institution or on the job training from another employer.
Who is RHI Magnesita?
RHI Magnesita is the global leader in refractory products. Our largest North American manufacturing plant is based in York, PA where our operation includes mining, aggregate crushing and screening, and various kiln processes to manufacture brick refractory products. Our manufacturing processes include heavy tonnage hydraulic presses, kilns, and robotic assisted palletizing/packaging automation.
What can RHI Magnesita do for you?
Our York, PA facility offers team members a variety of work for a life-time of fulfilling career opportunities. A skilled professional has high earning potential and the chance to advance through our 15+ departments. We encourage team members to take on-the-job training, test into advanced levels of position and pay, and bid on positions in different departments throughout their career. Our benefits package provides health and financial stability for our team members and their families. Learn more about us at: https://www.rhimagnesita.com/about/
Paid Time Off, Paid Holidays, company discounts, 401K with full company match up to 6%, comprehensive medical/ dental/ vision coverage, fitness membership reimbursement, company paid Life Insurance and Long/Short Term Disability.
The aforementioned is a summary of responsibilities and qualifications. A full job description will be available for anyone who interviews for a position.
Machine Operator II - Laser /Turret Operator 2Nd Shift
Job Description: You can 'build things' anywhere . . . so choose to work for a company that values what you bring to the table, provides you with an opportunity to succeed, challenges your skills, grows your talent, makes safety a priority, and gives you the chance to build a real career – one filled with challenge, passion, pride, and satisfaction.Under general supervision, the Machine Operator responsibility may include, but are not limited to set up and operate production equipment in accordance with established procedures and guidelines to insure quality, safety, and efficiency standards are met to satisfy customer requirements.We put the 'fast' in fast food and the refinement in fine dining. We put the icy refreshment in sodas and the 'rocks' in signature cocktails. Be part of an industry that touches every life. Advance your career with the leader in foodservice innovation!
Essential Job Functions:
Read and interpret job order, diagrams, and/or blueprints to select, position, and secure machinery and materials
Operate manual and/or numerically controlled production machinery and equipment
Inspect product to insure conformance to quality, engineering standards, and customer requirements
Load, unload, lift, and move materials and product utilizing lifting equipment when available
Complete and maintain all associated electronic processes and paperwork (including but not limited to bar-coding, checklists, stamping, blueprints, shipping/receiving documents, accessory lists, and scanning of materials)
Perform pre-shift preventative maintenance
Maintain departmental housekeeping and 5S standards
Perform duties in accordance with current Quality Management System, Safety Management System, and Manitowoc Code of Conduct requirements
Actively participate in safety training and demonstrate competency by effectively resolving safety issues or bringing them to the attention of management
1-3 years of related experience
Ability to read and interpret blue prints
Intermediate math and reading comprehension skills
Ability to read a tape measure
Basic ability to read, speak, and understand English language
Ability to demonstrate safe and effective operation of all required equipment
Stand and walk on concrete up to 100% of work day
Ability to bend, stoop, kneel, crouch
Lift and carry up to 35 lbs alone and over 35 lbs with assistance
Ability to climb and balance
Ability to visually inspect product
Ability to use hands to reach and to handle or feel
Manual dexterity in hands for tool usage
Ability to wear all required personal protective equipment
The Delfield Company – Covington, Tennessee manufactures and markets a complete line of foodservice equipment for restaurants, hotels and institutions (including prep tables, undercounter/worktop refrigeration, and blast chillers/freezers) and specializes in custom and reach-in refrigeration. The facility in Covington is a division of Welbilt, Inc.
Machine Operator - Bending (Req_Ut_180515_Mob)
Under limited supervision, sets up and operates automatic or manual production machines that bend metal structural shapes, such as bars, strips, rods, angles, and tubes to specified angle or contour according to blueprints and specifications.
Reads and interprets blueprints, engineering specifications, and shop orders to determine machine setup, production methods, and sequence of operation.
Locates and marks bending or cutting lines and reference points on work piece, using instruments, such as rule and compass, or by tracing from templates.
Positions work piece against end stops; locks holding clamp and guide clamp onto work piece.
Pulls lever or depresses pedal to activate turntable that draws work piece through guide clamp and around die block until stopped by plug stops.
May slide mandrel into tubing instead of using guide clamp or may use hand-powered machine.
May perform such fabricating tasks as flaring tube ends, using tube flare, or cutting metal stock to length, using power shears or saws.
Starts machine and observes machine operation to reposition work piece, change dies, or adjust machine settings for multiple or successive passes; may attach specified die to machine, using wrench.
Inspects or measures work, using rule, gauges, and templates.
Observes machine operations, material supplies, and position of work pieces to detect malfunctions, needed supplies, or misaligned parts.
Performs routine preventative maintenance on machines as scheduled and required for TPM.
Works individually and as a team to develop and implement quality and efficiency improvements.
Conducts tests and inspections of products, or processes to evaluate quality or performance; examines products or work to verify conformance to specifications.
High school diploma or general education degree (GED); with one to two years related experience and/or training; or equivalent combination of education and experience with production processes, machines and/or tools.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, proportions and decimals and complex shop mathematics. Ability and understanding of various measuring devices in meeting drawing dimensions and specifications.
Ability to read and interpret documents such as blueprints, work orders, work instructions, diagrams, safety rules, operating and maintenance instructions, and procedure manuals. Good verbal and written communication skills are necessary.
Work requires continual attention to detail in follow through, establishing priorities and meeting deadlines.
Process Operator - Machine Operator
Machine Operator – Process Operator, New Century, Kansas
Background & Purpose of the Job:
Unilever, New Century, Kansas, is actively seeking multiple Machine Operators – Process Operators to join our manufacturing environment. The shift hours vary from 2nd shift (3:00pm to 11:30pm) to 3rd shift (11:00pm to 7:30am). All qualified candidates are encouraged to apply!
Who You Are & What You'll Do:
The Machine Operator - Process Operator will work safely by observing all safety rules including proper utilization of lock out and tag out procedures. The successful candidate will also operate the machinery that makes margarine and spreads. This includes performing quality verifications, troubleshooting problems with the equipment, basic repair, changeovers, sanitizing the equipment, and utilizing World Class Manufacturing methods of continuous improvement. This is an entry level position where the employee will be trained on our specific machinery.
What You'll Need to Succeed:
High school diploma, or, GED equivalent.
A minimum of 2 years of machine operation experience in a manufacturing setting.
Mechanical abilities and experience using hand tools.
Proficiency with MS Office Suite (Word, Excel, and PowerPoint).
Training in a related technical field (Industrial Manufacturing, General Maintenance) is preferred.
The ability to work either 2nd or 3rd shift hours.
Unilever is an organization committed to diversity and inclusion to drive our business results and create a better future every day for our diverse employees, global consumers, partners, and communities. We believe a diverse workforce allows us to match our growth ambitions and drive inclusion across the business.
Machine Operator Iv-Senior Operator 2Nd Shift
Johnson Controls is a global diversified technology and multi industrial leader serving a wide range of customers in more than 150 countries. Our 117,000 employees create intelligent buildings, efficient energy solutions, integrated infrastructure and next generation transportation systems that work seamlessly together to deliver on the promise of smart cities and communities. Our commitment to sustainability dates back to our roots in 1885, with the invention of the first electric room thermostat. We are committed to helping our customers win and creating greater value for all of our stakeholders through strategic focus on our buildings and energy growth platforms. For additional information, please visit www.johnsoncontrols.com or follow us @johnsoncontrols on Twitter.
STATEMENT OF JOB
Reporting to the Production Supervisor, responsible to provide supervision to production employees in department(s) including work scheduling and assignment, employee training, ensuring production quality and quantity requirements are met, administering safety, communication and equipment maintenance, administrative duties include eTime labor verifications, and SAP transactions. This position requires Associates placed in the position to successfully complete specific training. These training requirements can be located on the Marinette Operations Training Matrix.
ENVIRONMENTAL, HEALTH, AND SAFETY OBLIGATIONS
Comply with the following Environmental, Health and Safety duties as a condition of employment:
Comply with safety rules
Attend and Participate in Safety Training
Participate actively in the safety process
Ask questions if something isn't known
Report all accidents and injuries immediately
Submit suggestions to improve safety
Know responsibilities in the event of an emergency (i.e. what to do in the event of an alarm for fire, chemical spills, tornados, etc.)
Be a coach to others who are acting unsafely
Must have Lock-out tags after 6 months?
Attend and participate in all hazardous and non-hazardous waste trainings.
Ability to recognize chemical hazardous labels.
Spill management and clean-up.
Air shutoff locations.
Capability to follow satellite accumulation rules and requirements.
Proficiency to recognize hazardous wastes in your area and manage properly.
Must be 18 years of age and have a HS Diploma or equivalent. Preference given to candidates possessing post-secondary education in manufacturing or relevant business related coursework. 3 – 5 years experience on a manufacturing environment.
1.Must possess creativity/adaptability to successfully manage Department to effectively address changing business conditions and to achieve objectives.
2.Must provide effective supervision of assigned employees to achieve desired results. Attributes necessary to meet this need may include communications, motivation, team building, employee involvement, diplomacy, delegating, etc. skills as well as confidence and enthusiasm.
3.Must possess thorough and relevant manufacturing knowledge.
4.Position requires occasional exercise of decision making, problem solving, policy or procedure interpretation and facilitation skills.
5.Ability to handle responsibilities with effective interpersonal skills and to effectively interface with others inside and outside the Company is required.
6.Position requires computer skills including Microsoft Word and ExceRP software; with SAP knowledge a plus.
7.May generally lead 15 to 30 employees.
8.Keep Production Supervisor informed of all pertinent information and developments.
9.Position requires extensive standing and walking as part of normal job duties.
10. Candidate must be skilled in nature in order to function in an environment where a variety of occupational skills may be required.
11. Position requires ability to work in a normal production plant environment.
12. Inventory monitoring, labor error corrections, correct negative messages, reject suspense, track part shortages, and update manufacturing schedules and e-time.
13. Will be responsible for monitory the process of incoming and outgoing inventory this will be accomplished by working with a designated planner.
14. Occasionally operates production equipment and tools.
15. Supplementary assistance to line operators.
16. Train employees in operation of equipment, as needed, in operation setup and trainer level proficiency.
17. Support to shift Production Supervisor in areas of production: scheduling, manpower planning and vacation planning.
18. Lead and support projects and assignments as assigned by Production Supervisor.
19. Raw material CNS planning, parts procurement, staging and line support; with the support of SAP tools.
Bindery Operator 1 / Machine Operator (38963)
PBM Graphics, Inc., an RR Donnelley Company is a leading commercial printing and packaging company in North America, producing educational products, publications, and sales materials for the healthcare industry and general commercial print for many other industries, as well as collectible trading cards associated with the entertainment and sports industries.
The machine operator is responsible for the running of the equipment to produce a quality product at the maximum production rate with a minimum of scrap. For his/her shift and slitting line, he/she will be responsible for the equipment and assigned workers.
Appropriate knowledge to communicate effectively with co-workers is essential.
Complete paperwork and reports related to the operation of their machine in a clear manner.
Seek assistance from a senior operator and/or supervisor if a problem can't be solved promptly.
The operator must check some of the products that are being made on his/her area throughout the day, by opening random items before sending to next stage/machine.
Have general safety knowledge of the equipment by reading the manual and seek clarification if there are any further questions.
Trainee will be educated thoroughly on standard operating procedures, safety, and mechanical job knowledge.
Understanding of mechanical motion, measurement, pneumatics, ability to read and follow written work instructions
Monitor quality of all jobs being packaged
Inspect jobs for correct customer specs
Prefer familiarity with basic mathematics (i.e. decimals, metric units) to understand dimensional requirements contained in job orders and to make more complicated adjustments
Skill in making adjustments to powered machines using hand tools (i.e. wrenches, screwdrivers, punches, knives) as well as more specialized hand tools, usually furnished by the machine manufacturer
Ability to read and interpret written work which indicates the number and sequence of machine operations required to complete the work and maintain dimensional accuracy in accordance with instructions provided.
Machine Operator - Strapper Operator
The Role: Machine Operator
- Strapper Operator
MPP Sycamore seeking a Machine Operator
- Strapper Operator to Operate designated machines and equipment to convert corrugated board into corrugated cartons or inner packaging within specifications of the customer orders.
This position will report to the: Warehouse Manager
Travel Requirement: 0-3 % of Travel Required/Frequency
FLSA Status: Non-exempt
At Orora, we believe our packaging touches lives and together, we, together as a team, deliver on the promise of what's inside. From custom packaging design and packaging materials, to prototype development and manufacturing, packaging automation and equipment, kitting and fulfillment, global sourcing, and full service warehousing and logistics, our packaging consultants develop cutting-edge, innovative solutions that take a product from concept to consumer. It is with this passion and commitment to innovation, we believe in hiring and developing the very best talent by living our core values of Teamwork, Passion, Respect, and Integrity every day.
Our vision is to be the industry-leading packaging solutions and displays company.
We value Teamwork, Passion, Respect and Integrity. These core values define who we are and how we operate. They shape the way we work with each other, with our customers, and with our communities. Every day, we deliver packaging solutions that exceed our customers' expectations while solving complex problems as a team.
We believe that all team members (irrespective of their role or level), should aspire to distinctive leadership behavior, as we continue to deliver on the promise for our customers, shareholders and each other. Leadership is not tied to a job title, i.e. you don't need to be accountable for a team to be considered a leader. At Orora leadership is encouraged at every level, within the team
What You'll be Responsible For in this Role
- In this role operate designated machines and equipment to convert corrugated board into corrugated cartons or inner packaging within specifications of the customer orders.
Safety and Health of self and team working in the assigned area.
Participation in all Safety Activities.
Safety Inspection of the Machine and equipment; machine lock out tag out.
Support and maintain ISO 9001 activities and ensure that required processes are maintained.
Utilize the company's business systems to attain the machine schedule and job specifications to determine material requirements, machine set up and adjustments.
Adjusts machine components in order to meet order specifications, etc...
Performs Quality inspections as required; remove finished packaged items from process and separate rejected items.
Regulates machine flow and speed; on-going monitoring of the production line, watching for problems, pile ups, jams, glue that is not sticking, etc...
Coordinates with assigned team and forklift operators to obtain all material requirements per the specifications, i.e.... cutting dies, print plates, ink and corrugated sheets, etc...
Monitors control panel on machine; observes machine operation to detect defects or machine malfunction.
Report quality, productivity, downtime and waste daily in the company's business system.
Completes Quality Checklist provided by the company timely and accurately at each process point for each production order
Trains, communicates and assists team assigned on the processes such as stacking, feeding, etc...
Performs cleanup of the machine and minor machine maintenance.
Keep area organized, clean and free from any hazardous conditions.
Implementation of ISO 9001 activities and ensure that required processes are maintained.
Performs other duties and/or responsibilities as requested.
What We're Looking For
- Three to five years related experience and/or training; or equivalent combinations of education and experience.
Additional Required Qualifications:
Ability to read and comprehend basic instructions. Must read, write and speak English at an adequate level for this position.
Ability to add, subtracts, multiply and divides.
Ability to convert from fractions to decimals and decimals to fractions.
Ability to use tape measure.
Ability to enter and utilize information in our computer business systems.
Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Orora and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at: firstname.lastname@example.org for additional support and guidance.
What We Offer
Our rich benefits packages are designed to support the health and well-being of both our eligible co-workers and their families.
Group Life and AD&D
Voluntary Life and AD&D
Group Short-Term Disability
Group Long-Term Disability
Flexible Spending Accounts
Employee Assistance Program
Profit Sharing and 401(k)
Paid Time Off
Equal Employment Opportunity
We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodations to qualified individuals with disabilities, as need, to assist them in performing essential job functions.
Orora does not accept unsolicited agency resumes. Orora is not responsible for any fees related to unsolicited resumes.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!