Lumber Straightener Job Description Sample
Machine Operator/ Composite Straightener Operator
Perform various required duties to set up and operate a Roll Mill, Bruderer Straightener and accessory equipment to straighten bi-metal coil stock and locate defective welds as well as loading, unloading and operating electric vacuum annealing furnaces following standard practices and procedures.
Check coil tags and material before annealing and again before straightening to assure proper information coil identity. Using overhead electric hoist, place racks of coils into floor level annealing furnaces. Input required data into programmed controller. Operation is automatic; furnace cycles and shuts off automatically. Monitor operation by means of temperature recording chart. Unload using overhead hoist and use Between loads, check furnace for broken elements, damaged seals, insulation, etc. Observe color and brightness of annealed stock.
Load coils of annealed stock to pay off reel and thread through rolling mill then through various guides, rollers, and wipers of Bruderer Straightener, through ultrasonic and laser inspection stations to take up reel. Select proper carbide spacers, guides and rollers. Make necessary adjustments to obtain required thickness and straightness. Adjust rollers to remove coil set and obtain desired camber. Adjust ultrasonic tester to set weld zone as directed. Cut large coils in half at take up reel.
Machine operates automatically and shuts off as defects pick up on sonic tester. View defect under microscope and mark spot with hand or hydraulic punch and grit blast. Cut large defects out with metal cutters if in excess of pre-established limits and form new coil. Cut sample strip of coil stock, use indicators and straight edge to check for straightness, bow, twist, etc. Maintain required production records indicating footage processed, type and number of defects. Enter and accumulate data in computer for production records and statistical quality control.
Loosen expandable chuck, tie coil with tie wire, remove from take up reel with electric hoist, place on skid with spacers and deliver skids to storage area. Monitor automatic operation of additional lines of straightening equipment during temporary absence of other operations.
Use chopper to dispose of scrap materials. Perform regular scheduled preventative maintenance and maintain log. Change tester transducers as required and calibrate laser gauge as necessary.
Detect and report unsafe or defective equipment of materials, unusual situations to supervisor. Maintain area and equipment in a neat and orderly manner.
Observe and obey all safety rules, regulations and practices.
Perform other similar or related duties as assigned or directed by supervisor.
Demanding, fast-paced position resulting from deadline pressures, simultaneous competing demands and changing priorities. Working is a team environment.
Knowledge of charts, specifications, and micrometers
1-2 years experience preferred
Use of numbers including decimals
Light physical effort required, equivalent to lifting, pushing, pulling 5 to 25 pounds
High School Diploma or GED Equivalent
Hours: X/O (2) 5a-5p (2) 5p-5a
ATI Cast Products, Albany Operations is a subsidiary company of Allegheny Technologies Incorporated (ATI). ATI is one of the largest and most diversified specialty materials and components producers in the world with revenues of approximately $4.0 billion for the last twelve months. ATI has approximately 9,600 full-time employees world-wide who use innovative technologies to offer global markets a wide range of specialty materials solutions. Our major markets are aerospace and defense, oil and gas/chemical process industry, electrical energy, medical, automotive, food equipment and appliance, and construction and mining.ATI's products include titanium and titanium alloys, nickel-based alloys and superalloys, engineered forgings and castings, zirconium, hafnium, niobium alloys, grain-oriented electrical steel, and stainless and specialty steels. ATI Cast Products is one of the world's premier producers of complex titanium investment casting for the aerospace industry. We are recognized as world leaders in product innovation, process development, and global responsiveness. It is an exciting time to join ATI Cast Products as we continue to transform and position our businesses for long term growth and profitability. ATI Cast Products offers a competitive compensation; wages, medical, dental and vision insurance plan, 401(k), life insurance, and Bonus incentive plan.
ATI Cast Products, Albany Operations is seeking a Straightener to join our team.
1.GENERAL SUMMARY (What does the position do?):
Responsible for straightening, grinding, welding, and otherwise bringing parts into spec. Also uses various dimensional tools, fixtures, and ultrasonic tools to determine the specs of a part, and make appropriate determinations as to the best way to bring the part into tolerance limits. Works closely with the salvage analyst, grinding, welding, and CMM.
2.MAJOR DUTIES (List duties in order of time spent on them, with the most first):
Be accountable for working safely by following all safety rules and safe work practices.
Always consider safety before action.
Use dimensional tools (calipers, dyers, Ultrasonic, etc.) and fixtures to determine if a part is out of spec.
Use blueprints, tech cards, and other instructions to determine the specs and tolerances of a part.
Determine the best method to rework a part and bring it back into spec without causing damage.
Straighten, heat, bend, push, pull, and otherwise move the part back into tech card and blueprint tolerances.
Use pneumatic drills to target parts for machining to blueprint specs.
Follow written and verbal instruction and work as a team member.
Work and interact in a positive and professional manner with support departments, including engineering, quality, and other manufacturing areas.
Train Straightening Mechanic as needed.
Work outside department as required.
Develop rework plans with other departments.
Other duties as assigned.
3.SUPERVISORY AUTHORITY (Degree to which position oversees the work of others)
4.NECESSARY EXPERIENCE/SKILLS (List those necessary to qualify for the position, and then list desirable skills)
Two years grinding experience or proven equivalent proficiency.
Working knowledge of dimensional tools and techniques.
Working knowledge of hydraulic presses.
Proficient ability in the use of blueprints, tech cards, and dimensional records.
Forward thinker/ Problem solving skills.
5.EDUCATIONAL QUALIFICATIONS, CERTIFICATIONS (List those necessary to qualify for the position, and then list desirables)
Must be able to pass a Jaeger eye exam.
Must be able to obtain a visual/dimensional bug within the first 90 days.
6.JOB CONDITIONS (Travel, extensive overtime, evening meetings, on-call, etc.)
Must be able to work outside department as required.
Occasional overtime required.
7.TOOLS AND EQUIPMENT USED
Dimensional tools, drills, hydraulic press, welding tools, hand tools, cranes, and ovens.
8.SUGGESTED RECRUITMENT AREAS:
Local geographic area
ATI Metals and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability status, or any other status protected by federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.
Refer to Job Description.
Area of Interest
Manufacturing / Production / Operations
Albany Operations Queen Ave-L02
Aluminum Press Operator / Straightener - Swings
Primary Function: Responsible for dimensional control and inspection of castings to meet external quality requirements.
Principle Duties and Responsibilities:
Configures and operates the straightening presses and ovens.
Effectively uses straightening and inspection fixtures as required according to procedures.
Dimensionally inspects and controls castings using measurement and straightening tools per procedures
Troubleshoots straightening fixtures.
Maintains, stores, and verifies calibration of measurement tools.
Machines all test bars.
Performs heat treat/age temper on all parts.
Maintains lot integrity.
Ensures paperwork is properly done.
Helps other areas as needed.
Minimum Job Requirements:
Able to work in a production environment.
Able to read and comprehend English.
Able to read and interpret blueprints and specifications regarding parts.
Able to add, subtract, multiply and divide in all units of measure using whole numbers, common fractions, and decimals. Able to compute rate, ratio, and percent.
Able to lift and carry up to 50 lbs. occasionally.
Able to lift and carry up to 25 lbs. frequently.
Able to communicate effectively with co-workers.
Able to read and interpret documents, such as safety rules, operating and maintenance instructions, and procedure manuals.
Able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Able to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Near vision requirement is Jaeger J1 in one eye, at no less than 12 inches; or equivalent, or Jaeger J2 in one eye, at no less than 16 inches. Corrected or uncorrected.
Able to complete OSHA forklift certification through GSC.
Able to complete GSC Straightening certifications required in grade system.
Able to use measurement tools and instruments.
Able to communicate effectively with co-workers.
Willing to work overtime.
Complies with company and departmental policies and procedures, including company's attendance policy.
Able to meet individual productivity requirements.
Able to meet internal quality requirements.
High school diploma or GED
Previous experience with blueprints.
Normal Working Conditions
Works under close supervision with frequent guidance and check, following standard practices in the performance of routine work. Refers all questions or problems not defined by standard practice and established procedure to the supervisor.
Environmental conditions encountered occasionally include wet or humid conditions-non-weather, working near moving mechanical parts, toxic or caustic chemicals, extreme cold non-weather, extreme heat non-weather, and vibration.
Typical noise required for the work environment of this job is Loud Noise. (Appropriate ear protection is required.)
Occasional reaching above shoulder level, reaching below shoulder level, climbing, stooping or squatting, and talking required.
Frequent sitting, standing, walking, hearing, pushing or pulling required.
Continuous using hands to handle or feel required.
The above statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all duties, responsibilities, and skills.
PCC Structurals is committed to a diverse workforce. As Equal Opportunity Employer, VEVRAA Federal Contractor, affirmative action employer we provide equal opportunity to all persons, regardless of race, religion, age, gender, disability, status as a protected veteran, national origin, color, or any other classification in accordance with federal, state, and local statutes, regulations and ordinances "Minority/Female/Disability/Veteran Status/VEVRAA Federal Contractor". Veterans are encouraged to self-identify as PCC Structurals desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA).
In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact 503-652-3512 for assistance. PCC Structurals is a VEVRAA Federal Contractor committed to providing priority referrals of protected veterans for its openings. Veterans are encouraged to self-identify as desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA). If you would like more information about Equal Employment Opportunity as an applicant under the law, please visit www.eeoc.gov
Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.
Part Time Lumber Stacker - General Laborer
Our Trempealeau, WI location is hiring for lumber stacker / general laborer. If you previously worked as a warehouse worker or any entry level general labor position before, you'll be a great fit for this role. These positions are part time and permanent opportunities working for a world class hardwood lumber manufacturer.
Part Time General Laborer - Lumber Stacker
Entry Level General Laborer
Identify the sort numbers for the carts you are responsible for. Pull boards into the correct carts according to the sort numbers on the boards.
Pile the boards with the following criteria:
Top, bottom and outside boards will be the longest
All edges will be free of knots, wane, writing and other defects
Bundle must be square with edge boards against the pipes of the cart
Build each bundle until full and finish off with a nice top layer
Push out finished bundle for forklift to remove
Lumber Stacker Laborer Education & Experience:
Previous experience as a warehouse worker preferred
Previous experience as an entry level worker is preferred
Previous experience working on a farm is a plus!
High School degree preferred, but not required
Customizable Part Time Hours
Please refer to the "Full Job Description" button below to review our physical demands form prior to applying to this position.*
Essential Job Duties:
Estimate the amount of materials needed for home construction according to company policy and local building code.
Assist salesmen as needed with customer orders and materials lists.
Work with builders and subcontractors as needed for efficiency gains.
Train and assist sales representatives and account coordinators in electronic estimating techniques.
Assist sales staff with blueprint reading and construction procedures.
Review actual vs. estimated materials on completion of each project.
Control expenditures to conform to company budgetary requirements.
Comply with Companys attendance policy by maintaining regular and predictable attendance.
Other duties as assigned by location management.
Required Knowledge, Skills, and Abilities:
- Minimum education required
Technical Degree in engineering or related area.
Minimum experience required2 or more years of construction and building materials related experience.
Special skills required
Ability to read blueprints and other technical materials. Ability to interpret building plans in diagram form and deal with abstract and concrete variables. Ability to operate networked computer systems and specialized software application programs and to instruct others in effective use of application software. Must have excellent oral communication skills and positive interpersonal skills.
- Special Knowledge required
Understanding of measurements and basic math principles.
- Physical demands include sitting for extended periods of time, standing and walking, bending or stooping, lifting up to 25 pounds frequently and up to 50 pounds occasionally.
Load Builder II Lumber Yard Full - Time
Under general supervision performs routine loading and unloading of materials within yard or work site; assembles load packages into truck for delivery to customer job sites.
Drives various lifting devices (e.g. forklift) to move products, equipment of materials around the warehouse, shop or yard.
Oversees the work of less-experienced Load Builders as necessary.
Positions forks, lifting platform, or other lifting devices, under, over, or around loaded pallets, skids, boxes, products, or materials or hooks tow trucks to trailer hitch and assists with transporting load to designated area.
Attaches identifying tags or labels to materials or marks information on cases, bales or other containers so as to provide correct identification of items.
High school diploma or General Education Degree (GED) and a minimum of directly related experience; or equivalent combination of education and experience. Forklift Certification required.
Builders FirstSource is an Equal Opportunity/Affirmative Action Employer.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status or status as an individual with a disability.
Lumber Yard Associate
Lumber Yard Associate
Wisconsin Building Supply is the States Leading Resource for New Home Builders, Remodeling and Commercial Building Projects.
We are currently looking for a Yard Associate for our Windsor, WI facility.
The Lumber Yard Associate will be responsible to receive, ship, stock, order, and count inventory items while monitoring quality and completing all appropriate paperwork. This associate is responsible for overseeing the safe movement of materials and finished components in an efficient manner. Operates forklift truck with foot and hand controls for various aspects of job. The associate will be responsible for cutting lumber to purchased measurements minimizing wasted product.
Successful Candidates will have
A team focused approach to work
Strong communication skills
Eagerness to learn
Willingness to go above and beyond
Proficient reading a measuring tape
Required knowledge, skills, and abilities:
1.Minimum education required
High school diploma or GED
3.Basic math skills, ability to identify and measure commodities and specialty building products
CDL Class A Truck Driver - Lumber
CDL Class A Truck Driver Summary:
Greene Lumber Co. is looking for qualified CDL A Truck Drivers to help support our sawmill. We have CDL Class A Truck Driver openings in Davenport, Cayuta and Owego!
CDL Class A Truck Driver Pay & Benefits:
Full Time Hours
Overtime Hours and Pay
Full Plan of Benefits
Must possess a clean CDL A
Must have a valid DOT medical card
Prefer a candidate who has 5 years experience driving tractor trailers, but MUST have a minimum of at least 3 years
CDL Class A Truck Driver Daily Duties:
Primary duties include driving a tractor trailer or straight truck (tri-axle) with wagon attached
Driving on interstate highways, state highways, county roads and local (town) roads throughout New York, Pennsylvania and occasion other northeast states
Delivering lumber to various company facilities and outside lumber companies
Picking up logs from log landings, log yards and other company operations
If you meet the above requirements for our CDL Class A Truck Driver position, please apply today!
- Please refer to the "Full Job Description" button below to review our physical demands form prior to applying to this position.*
UFP Washington is currently hiring Laborers. We are seeking hardworking, determined workers who have a desire for growth within our company.
This position would be stacking, grading, organizing, and tagging lumber. No experience required. However, some kind of general labor experience is strongly desired.
Work is performed in a yard type environment. Workers can be exposed to inclement weather,
Day shift - 6am start time (45 - 55 hours weekly)
Laborers are responsible for safely handling lumber products and verifying material meets customer requirements/expectations.
VP Of Finance - Lumber & Building Materials Industry - Keaau
We are looking for a VP of Finance who will oversee the company's budgeting, financial reporting, accounting and finance functions. This is a very rare opportunity to work with a 100% employee-owned company with operations throughout Hawaii. This would be a great fit for someone looking to get out of the daily grind of city life and wanting to enjoy the lower cost of living and rural lifestyle found on the Big Island of Hawaii, while still having the advantages of working for a larger, innovative organization.
As the VP of Finance, you will have a core team of accounting and finance professionals reporting to you. You will join and partner with leadership across the organization to identify and execute actions, drive growth, and help the company achieve its long-term financial goals.
We are looking for a professional that is analytical, finds motivation in managing multiple priorities, digging into details, and being part of a high functioning team. If you like to work with numbers and people and consider yourself to be flexible, open minded, and meticulous, then we'd love to hear from you.
B.A./B.S. (MBA preferred) with 7-10 years of finance and accounting experience
CPA or CMA preferred
Proven leader with experience growing, mentoring, and developing a team
Capable of presenting complex financial information in an easy to understand format
Ability to think creatively; highly-driven and self-motivated. Highest standards of accuracy and precision; highly organized
Strong financial acumen broadly across the organization (e.g., understanding of financial statements, GAAP, chart of accounts, business intelligence, FP&A processes, etc.)
Experience in complex modeling (e.g., cash flow, headcount, etc.)
Customer focused, self-managing problem solver, accountable and able to thrive in autonomous environments
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!