Machine Tank Operator Job Description Sample
Operator I Tank Cleaning
Without supervision, oversees and directs the work of small tomedium size jobs at client's site in accordance with client and businessrequirements and PSC policies, practices and procedures.
PRINCIPAL DUTIES AND RESPONSIBILITIES:
Instructs, directs andassists crew in performance of job duties to complete work in accordance withclient requirements and PSC policies, practices and procedures.
Enforces PSC employeepolicies and may remove employee from job when required.
Reads work order andensures all required equipment is available and operational prior to startingjob. Inspects equipment and general work area prior to starting any job.
Corrects deficiencies thatmay cause accidents, injuries, lost productivity or harm to equipment or thatare inconsistent with client's requirements.
Communicates Performs preventativeand corrective maintenance on equipment when required. Completes allappropriate paperwork including service receipts, and submits to designatedmanagement.
Trains Technicians I and IIin equipment operation and service line processes.
Operates all necessaryequipment in service line (chemical, hydro-blasting, painting/blasting,asbestos and vacuum) in accordance with operation training and safetyprocedures.
Performs other duties asassigned.
- All required local training
Chemical Awareness & Application school Paperwork training.
CDL with Class A or BCompliance with MVR policy.
Compliance with Drugpolicy.
Compliance with Backgroundchecking policy.
Compliance with DOTphysical requirements Possess BASIC Safety Council Reciprocal Card Possess allrequired I-9 documentation
Plating Tank Operator A
Perform any electroplating operations to surface parts and materials with cadmium, zinc, nickel or copper, using hazardous chemicals. Develop setups for electroplating operations in which processing time, voltage, amperage and blockoffs have not been charted and record information for future use.
Determine from blueprints or process charts amount of buildup necessary and surfaces to be masked. Maintain chemical strength and proper level of solution in tanks as specified.
Run tanks from computerized controller. Select processing time, voltage and amperage by calculating surface area to be plated. Select electrodes and determine spacing of parts in tanks.
Check parts for cleanliness and proper surface. Test plating to determine adherence, thickness, quality, surface coverage, and specified buildup.
Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians.
Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Relocation Assistance Available
No. Relocation assistance is not a negotiable benefit.
Exposure to plastics and solvents with exposure to dust, mist, fumes and odors Frequent (3-6 hrs) exposure to noise. Handle, use and dispose of hazardous materials. May require some exposure to chemicals.
Must be able to obtain and maintain personnel certifications as required to support job responsibilities. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.
This is an hourly position governed by the IAM Collective Bargaining agreement. Use of personal protective equipment for face/eyes and ears may be required. (5) Years minimum related experience. High school graduate or GED preferred.
This position must meet Export Control Compliance requirements, therefore a United States Person as defined by 22 C.F.R. § 120.15, "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee, is required.
Contingent Upon Program Award
Sr. Tank Operator
Sr. Tank Operator
In coordination with Lead person conducts and decides all the complex chemical milling functions including process, hardware, workflow and verifying thickness, dimensions and calculating etch rates by performing the following duties.the following description has been provided as examples of the types of work performed by employees assigned to this job classification. Management reserves the right to add, modify change or rescind the work assignments of different positions in accordance to Ducommun Aerostructures business needs, and to make reasonable accommodations so that qualified employees can perform the essential functions of the job.
Each job function will be conducted within the quality standards described in the Ducommun Aerostructures Quality Statement. Follow all safety rules. Other duties may be assigned.
Reads work orders/traveler instructions and shop sketches for job orders and completes all job within blue print tolerances
Determines racking methods for all size and shaped parts and rack parts
Verify thickness and dimension of parts by use of various tools such as micrometer, profilometers, depth gages and ultrasonic equipment
Assist Lead person in tank scheduling to meet customer demands
Calculates removal and etch rates, taper rates and undercut ratios
Monitors part quality
Monitors quality in chemical milling features such as surface finish , flow lines and etch back
Check parts for chem mill defects and follows SOP for corrections
Identify defects and determine correct course of action prior to proceeding
Make all maskant repairs by following scribe SOP
Assists lead and senior operators
Uses hoist, crane, carts to move parts
Trains General Helpers and Tank Trainees
Skills & Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
Experience/Training/Education/Certification: Less than high school education; or up to three to five years of tank operator experience; or equivalent combination of education and experience. Must pass the Tank Operator Certification Test
Knowledge/Abilities/ Skills/Tools: Ability to read and comprehend blue prints, work orders, traveler instructions and shop sketches. Ability to write simple correspondence. Working knowledge and understanding of in process inspection duties, maskant, scribe and bench requirements as stated on the work order/traveler and the etchant types and differences. Ability to effectively present information in one-on-one. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to calculate etch rates. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Ability to operate a hoist and crane. Ability to use power tools such as drills saws and wrenches.
1885 N. Batavia Street
Orange, California, 92865
Machine Operator Iii-Boilerhouse Operator Swing Shift
Johnson Controls is a global diversified technology and multi industrial leader serving a wide range of customers in more than 150 countries. Our 117,000 employees create intelligent buildings, efficient energy solutions, integrated infrastructure and next generation transportation systems that work seamlessly together to deliver on the promise of smart cities and communities. Our commitment to sustainability dates back to our roots in 1885, with the invention of the first electric room thermostat. We are committed to helping our customers win and creating greater value for all of our stakeholders through strategic focus on our buildings and energy growth platforms. For additional information, please visit www.johnsoncontrols.com or follow us @johnsoncontrols on Twitter.
STATEMENT OF JOB
The Boiler Operator operates 400 hsp boiler to generate heating and processing steam, sampling and testing water from the boiler and boiler feed lines, making manual adjustments of valves to correct steam pressure, fuel-air ratio and regulating water entering the boiler house and manufacturing areas. Maintains daily log on test results, regenerates Zeolite water softeners, performs emergency minor repairs and blows down boilers daily. Operates Murray boiler when Keeler boiler is down for maintenance by monitoring charts and switching fuel supply from gas to propane as directed. Monitors, controls and assures proper chemical supply in waste water treatment plant.
ENVIRONMENTAL, HEALTH, AND SAFETY OBLIGATIONS
Comply with the following Environmental, Health and Safety duties as a condition of employment:
Comply with safety rules
Attend and Participate in Safety Training
Participate actively in the safety process
Ask questions if something isn't known
Report all accidents and injuries immediately
Submit suggestions to improve safety
Know responsibilities in the event of an emergency (i.e. what to do in the event of an alarm for fire, chemical spills, tornados, etc.)
Be a coach to others who are acting unsafely
Must have Lock-out tags after 6 months?
Attend and participate in all hazardous and non-hazardous waste trainings.
Ability to recognize chemical hazardous labels.
Spill management and clean-up.
Air shutoff locations.
Capability to follow satellite accumulation rules and requirements.
Proficiency to recognize hazardous wastes in your area and manage properly.
Must be 18 years of age and have a HS Diploma or equivalent. Must be able to read and follow written and oral instructions. Must have good mechanical ability, be able to climb, work in elevated levels and awkward positions and must be able to lift average to heavy weights. Boiler/pressure vessel certification(s) a plus.
1.Collects water samples (2) from the boiler and boiler feed line and performs routine tests by observing points or color changes as solutions are mixed and added. Tests are performed to determine alkalinity, total dissolved solids and phosphates. Results are recorded on Water Analysis sheets. Water is treated so as to bring it within prescribed limits for water softness.
2.Prepares Boiler Plant summary sheet, performance log and makes calculations such as efficiency and evaporation rate according to established formulas. Prepares daily Industrial Discharge data sheet.
3.Regenerates Zeolite water softeners by back washing filters, preparing salt brine, according to established procedures.
4.Operates boiler by performing a variety of operations such as manipulating valves that control steam used in production, checking items such as water and air temperature, and recording on Data Sheets.
5.Performs emergency minor repairs on pumps such as tightening, packing.
6.Daily backwashes filter.
7.During power failures, notifies production areas when there will be steam interruption if anticipated.
8.Insures proper operation of waste control equipment by checking caustic and acid pumps to insure their operation, checking caustic and acid tank levels and line to locate leaks. Places sample jug at pumping house outlet daily to collect sample for testing.
9.Monitors waste control panel by reading outlet and inlet pH monitors. Caustic and acid barrels level indicators and caustic tank temperature, and insures automatic equipment is operating. Also monitors outfall lift pumps, including determining exceptions to prescribed limits of outfall.
10. Repairs or troubleshoots pollution equipment or calls in Maintenance or Waste Control personnel for assistance.
11. Contacts natural gas and fuel suppliers for procurement in the event of fuel interruption.
12. Charges lime softener by filling tank with water and lime and other chemical daily.
13. Takes sludge sample from Graver Tank and determines % of sludge in boiler feed water daily.
14. Performs safety inspections to insure safe boiler operation by such activities as manually lifting the high pressure relief valves and low water cut out switch by lowering the water level in the boiler.
15. Assist boiler relief operator during boiler inspection and preparation.
16. In the event of fuel interruption, have the ability and training to change over the fuel requirement.
17. Performs housekeeping and related duties as may be assigned by the Supervisor.
Machine Operator III - Fin Machine Operator
Ensuring Chart's Success…
Chart's manufacturing group is critical to building our products on time and of the highest quality to our customers. The Machine Operator III will work towards our production goals along with peers through the direction of lead man, shift supervisor, and plant manager.
What Your Day-to-Day Activities Will Be…
Candidates will have be running McElroy and Happy fin tube machines
Reads, interprets drawings and written instruction applicable to specific machining process.
Performs set-up and operation as required without supervision.
Performs all required measurements.
Capable of required tool selection for required task.
Trains, or assists in training new employees.
Can safely operate overhead or jib type cranes and rigging.
Performs all non-electrical preventative maintenance as indicated by supervision for specific machinery.
Adhere to all safety guidelines and policies.
Other duties as assigned.
Your Professional Experience Should Be…
- The ability to reading a tape measure as well as blue prints.
Your Education Should Be…
- High School Diploma or Equivalent Work Experience
Your Physical Work Environment Will Require…
While performing the duties of this job, the employee is regularly required to:
Standing for prolonged periods of time.
Occasional repetitive lifting up to 60 lbs as regular daily activities necessitate.
Handle or feel objects.
Tools or controls and talk or hear.
The employee is occasionally required to walk, stoop, kneel, crouch or crawl.
Chart Industries is an equal opportunity employer.
Machine Operator Entry - VMC Cell Operator - 1St Shift
Good safety, attendance, and performance record
Ablility to interpret shop blueprints
Ablility to interpret MOSs
Ability to do arithmetic and basic shop math
Use standard measuring instruments
Work with minimum supervision
Work well with others
To stay connected with exciting news and the latest job opportunities from GE businesses, follow us on twitter: @geconnections
The Machine Operator Entry
VMC Cell Operator is required to perform each of the tasks below in a safe and timely manner. The Machine Operator Entry
VMC Cell Operator must focus on quality as well as productivity.
As the Machine Operator Entry
- VMC Cell Operator, you will:
Interpret written specs
Perform repetitive heavy lifting
Perform standard work per the quality work plans
Generate improvement ideas on a weekly basis
Participation in team based improvement activities
Activity participate in standard work revisions
Inspect parts using pin / thread gages
Position, adjust, and secure stock or work pieces against stops on chucks, vises, fixtures, or automatic feeding mechanisms
Add coolant and lubrication materials to maintain proper levels
Clean, maintain, and organize assigned area
- High School Diploma / GED
GE is the world's Digital Industrial Company, transforming industry with software-defined machines and solutions that are connected, responsive and predictive. Through our people, leadership development, services, technology and scale, GE delivers better outcomes for global customers by speaking the language of industry.
GE Power is a world leader in power generation with deep domain expertise that helps customers deliver electricity from a wide spectrum of fuel sources. We are transforming the electricity industry with the digital power plant, the world's largest & most efficient gas turbine, full balance of plant solutions and our data-leveraging software. Our innovative technologies and digital offerings help make power and water more affordable, reliable, accessible and sustainable.
GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
Mold Machine Operator B - Ssbo/116
To operate a variety of molding machines to produce moderately complex wax pattern and gating components of the highest quality.
To inspect, trim and clean wax parts as required.
Objective: to accurately prepare tooling dies for operation.
Essential Job Functions:
A. Assembles disassembles, prepares and positions tooling dies for operation; changes die inserts as required.
B. Adds chills and solubles per tech cards.
C. Removes and/or cleans tooling after operation.
2.Mold Machine Operation
Objective: To operate moderately complex molding machines accurately and efficiently using technique cards and established setup procedures. To maintain dimensional integrity of product.
Essential Job Functions:
A. Sets up, monitors, and controls mold machine functions.
B. Keeps dies clean during molding operations.
C. Removes wax parts from die, inspects for defects, and trims.
D. Cleans wax parts as required.
3.Completes logs and records; documents any modifications to process.
4.Meets all production and quality standards.
Objective: to take responsibility for and demonstrate safe work practices.
Essential Job Functions:
A. Adheres to plant and department safety rules.
B. Safely operates all equipment and tools.
C. Identifies and reports safety problems.
OTHER (MARGINAL) ACCOUNTABILITIES:
6.May train less skilled operators as assigned.
7.Performs other tasks as directed.
8.May be required to work with hazardous waste.
ESSENTIAL EQUIPMENT, MACHINERY AND/OR TOOLS USED:
2.Side cutters and/or knives
4.Torches and air nozzles
6.Wrenches; allen and crescent
10. Dental picks
11. Mold Machines
1.Training is provided on the job.
2.May be required to complete Hazardous Waste Management Training.
1.Skill in wax molding operations, as demonstrated by three to six months of competent performance in any wax molding utility, leach tank or core/gate cleaner positions is preferred
any equivalent combination of training and work experience.
2.Ability to read, interpret and follow specifications on Technique Cards, Process Control Procedures and other special instructions.
3.Ability to perform basic mathematical calculations. (addition, subtraction, multiplication and division)
4.Ability to work alone with limited supervision.
5.Written language skills required.
6.Physical ability to perform the essential job functions.
PCC Structurals is committed to a diverse workforce. As Equal Opportunity Employer, VEVRAA Federal Contractor, affirmative action employer we provide equal opportunity to all persons, regardless of race, religion, age, gender, disability, status as a protected veteran, national origin, color, or any other classification in accordance with federal, state, and local statutes, regulations and ordinances "Minority/Female/Disability/Veteran Status/VEVRAA Federal Contractor". Veterans are encouraged to self-identify as PCC Structurals desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA).
In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact 503-652-3512 for assistance. PCC Structurals is a VEVRAA Federal Contractor committed to providing priority referrals of protected veterans for its openings.
Veterans are encouraged to self-identify as desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA). If you would like more information about Equal Employment Opportunity as an applicant under the law, please visit www.eeoc.gov
CNC Machine Operator
Symmons Industries is a family-owned, premier domestic manufacturer of commercial and residential plumbing products. We are proudly respected in the industry for the quality of our products and customized service levels. Headquartered in Braintree, MA, Symmons is currently seeking a CNC Machine Operator to operate and support all metal working and processing machinery as well as manufacture components for assembly.
Machine production operation on CNC Millers, CNC Lathes, Drill Presses, Bridgeports, Saw Cutters, and other manufacturing machine equipment
Operate and provide support on all metal working and processing machinery (i.e. Kanban Processes, quality control and inspecting machined parts)Manufacture machine Copper Alloys, Steels, and Plastics
Operate Fanuc and OSP family Controllers
Check, adjust and manage lube oil and water-soluble coolant machine tanks
Clean out machine of material and manage chips collection and distribution to chip spinning cell
Support the operation of the equipment tooling sequencing and basic understand production, including lights out operation
Operate from issued blueprints, verbal and written work instructions to produce qualified parts
Maintain product quality and quantities hourly. As required, product must be checked with prescribed inspection sample sets with various inspection measurement instruments
Work from schedules, Kanban signals, and work orders
Material handling - as needed, move material from one area to another with the use of material handling equipment (such as wheeled-carts, pallet jacks or 2-wheel hand trucks)
Maintain machinist maintenance of machine, and incoming/outgoing material, post transactions of all make parts made each day
Maintain clean cell area, practice 5S principles. Maintains safe and clean work environment by complying with safety procedures
Perform other duties and responsibilities as necessary
Adhere to company safety policy and procedures
To maintain a team atmosphere by communicating effectively within the department, as well as through-out the company.
High School Diploma/GED equivalent, Vocational Technical experience preferred
1-3 years of CNC Operator experience
Required to perform machine cell labor with heavy lifting of up to 35 pounds is necessary
Demonstrate dependability through good judgment and be able to work well with a wide range of people as a team, in varied cell environments
Passing Grade on the Basic Math, Comprehensive English and Mechanical Aptitude Tests
Hours: Monday-Friday, 7:00 am- 3:30 pm
Symmons Industries is a premier manufacturer of commercial and residential plumbing products, setting the standard for quality in plumbing fittings since 1939. From the pioneering development of our pressure balancing anti-scald shower valve, to our expansive range of exceptional customized Design Studio products for the kitchen and bath - we have maintained an unrivaled commitment to quality materials, superior engineering and solid workmanship. As an industry leader, Symmons continues to innovate within the custom fittings category, creating distinctive design solutions for premium hospitality and condominium projects. Pairing reliable behind the wall technology with stylish and durable products in front of the wall, Symmons is truly the smart choice in plumbing. Headquartered in Braintree, MA, Symmons is a privately-held company with regional sales offices and local representatives located throughout the United States and Canada. For more information please visit www.symmons.com.
Symmons offers a competitive compensation package including excellent benefits and a 401k plan with 100% match up to the first 6% of eligible wages with immediate vesting.
Machine Operator Large Ball Lap Finish
Winsted Precision Ball, a division of Schaeffler Group USA, is seeking a qualified Machine Operator to support our Winsted, CT location.
Operate a group of production machines to achieve specified levels of quality and production standards. Maintain machines, including preventive maintenance, including disposal of swarf from waste tanks to assure a high standard of operating efficiency.
Move work to and from work area as required.
Keep accurate records of production output. Assist set-up operator as required.
Keep work area clean and orderly. Assist in other duties as required by supervisor. Work under direction and follow established practice and clear-cut policy in performing majority of duties. Make decisions when general instructions, established methods and clearly defined precedents indicate action to be taken, but refer unusual problems to supervisor.
Additional knowledge on the order of understanding decimals & using arithmetic involving decimals; comprehension of simple drawings, charts or diagrams. Equivalent to partial (technical) high school education; or comparable brief shop training. Frequent lifting of up to 50 lbs unassisted. Excess of 50 lbs. assistance required. Frequent loading and unloading of machines. Considerable amount of pushing and pulling. Operate overhead hoise, high degree of hand eye coordination required due to closeness of machines and overhead wiring. Ability to read and follow instructions, procedures and route cards. Must be able to use measuring devices.
3 – 6 months experience
Schaeffler is an Equal Opportunity Employer/Minorities/Females/Disabled/Veterans
Saw Machine Operator - 2Nd Shift
Trinity Marine Products is searching for a Saw Machine Operator - 2nd Shift in our Ashland City, TN barge manufacturing plant; located within 30 minutes from Music City, Downtown Nashville.
Trinity Marine Products, Inc. (TMP) is a leading U.S. manufacturer of barges that transport dry and liquid cargoes on inland waterways. TMP manufactures tank barges that carry petroleum and other refined products, chemicals, fertilizer, ethanol, and other liquid cargoes. TMP also manufactures dry cargo barges, including flat-deck and hopper barges that transport a variety of products, such as grain, coal, and
What You'll Do:
Set up and operate complex machines to produce acceptable parts according to detailed specifications
Work daily with metal fabricating machines, such as: plasma, wheelabrator, press, saws, and heavy-duty presses
Cut,bend, straighten, and form metal parts specified by blueprints, layouts, and templates
Train lower level operators on machine operations
Operate all machines in the department
Follow all standard safety practices
Maintain and complete all required records
Shift Schedule: 2:30 PM-11:00 PM, Mon-Friday
What You'll Need:
1-2 years of related machine operation experience
Advanced knowledge of operating metal fabricating machinery
Capable of operating conventional equipment with multiple processes of turns
Basic to intermediate knowledge of shop math
Able to read and interpret blueprints, engineering specifications and shop orders to determine machine setup
Ability to use troubleshoot mechanics and hand tools, including measuring tape
Knowledge to troubleshoot, code, and operate complex machines
License to operate a forklift
Able to complete standard records
Plasma or Laser cutting
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!