Maintenance Inspector Job Description Sample
Position Summary: The primary objective is to monitor equipment condition on a continuous basis and analyze trends in order to ascertain the required maintenance interventions (mechanical, electrical, mobile equipment) necessary to maximize equipment reliability, performance and life expectancy, at the lowest possible cost, while maintaining the production functions.
Nature and Scope: The Maintenance Inspector monitors equipment condition, in part, by performing both a formal schedule of systematic inspections (PM) of plant equipment, and non-systematic inspections as required by equipment stoppages, daily incidents and pending downdays.
The inspector records and analyzes data, then initiates the appropriate work orders, in order to maintain or replace equipment components so that equipment reliability and performance are maximized and costs can be minimized and budgeted properly. The majority of the work performed by the maintenance group is initiated by the Maintenance Inspector.
The Maintenance Inspector, in collaboration with the Maintenance Supervisor and Maintenance Planner, plays a key role in the development, review and modification of the formal schedule of PM activities (Master Schedule). The inspectors use Advanced Detection Techniques (Vibration Analysis, Oil Analysis, NDT ??) to perform the equipment inspections along with ?5 senses? and simple measurement methods.
Following repairs and new installations, the Maintenance Inspector performs follow-up inspections and verifies tolerances in critical issues to assure compliance to acceptance standards and the PPM Guidelines. Along with the Planner, the Inspector may need to inspect repairs and/or rebuilds being made off-site, and the responsibility is shared for the quality of specialized items received by Stores.
The Maintenance Inspector is the recognized technical expert in his area of the plant and he provides advice and support accordingly. He makes most technical decisions regarding plant equipment for the Planner, and coaches other maintenance practitioners whether involved in Inspection or Execution functions.
He interacts with production personnel regarding operating procedures which have an impact on equipment. He is a participant in the budgeting process and is the prime source of advice in the planning and scheduling of major maintenance activities
Quality Control Inspector – Line Maintenance
What does a Quality Control Inspector do for Allegiant?
Through experience and training (classroom & on-the-job) in aircraft maintenance, Inspectors are "FAA Certified Technicians" who, have demonstrated the ability to determine and certify airworthiness of aircraft, aircraft systems, appliances, and/or structures they are authorized to inspect. Inspectors are responsible for the inspections and actions necessary to assure maintenance performed is done so in accordance with the Allegiant Travel Company's Continuing Airworthiness Maintenance Program as well as other applicable guidance. Some of the responsibilities which accompany this position include Required Inspection Items (RII) as identified in the Allegiant GMM, various designated inspection items within the maintenance program, Non-Destructive Testing (NDT), engine borescope inspections, parts/material Receiving Inspection (RI) functions, as well as other tasks assigned.
What are some of the daily duties of a Quality Control Inspector?
Accomplish inspection/RII tasks on airframes, powerplants, and other aircraft components as required
Inspect items as identified on task cards, engineering orders, and applicable guidance documentation
Accomplish Non-Destructive Testing (NDT) inspections
Perform borescope inspections
Document discrepancies identified during inspection tasks
Examine aircraft maintenance logbook entries and maintenance/inspection paperwork to ensure proper completion in accordance with Allegiant Air's General Maintenance Manual
Provide Airworthiness Release returning to service aircraft following maintenance as appropriate
Inspect incoming parts/materials with accompanying documentation to verify conformance to airworthiness requirements
When so authorized, conduct audits of Repair/Overhaul Vendors, Fuel Vendors and internal audits of Company departments and functions
Perform other duties as assigned by the Director of Quality
What are the minimum requirements to be a Quality Control Inspector?
Must pass background check and pre-employment drug test
Must have A&P Licenses; High School Diploma or GED; College preferred
Must have 2 Years 121 operator, 135 operator, or 145 repair facility experience
Must have authorization to work in the U.S. as defined in the Immigration's Act of 1986
Must be available to work days or nights, weekdays, weekends, and holidays as determined by shift bid
What other skills, knowledge, and qualifications are needed to be a Quality Control Inspector?
Preferred 5yrs MD-80/A320/B757 experience in commercial airline QC Inspection
Strong NDT background preferred
Basic Computer Skills
Work Environment for a Quality Control Inspector?
Primarily Outdoors; Aircraft Operation Area
Must be available to travel
- Ability to lift and maneuver up to 50lbs, climb, bend, stoop, crawl, kneel, and enter confined spaces.
Allegiant is an equal opportunity employer and will not unlawfully discriminate against qualified applicants or Team Members with respect to any terms or conditions of employment based on race, color, national origin, ancestry, gender, sexual orientation, age, religion, creed, marital status, military service status, union/non-union activity, citizenship status, or other characteristic protected by state or federal law or local ordinance. This includes compliance with all federal, state and local laws providing for nondiscrimination on the basis of disability in all aspects of the employment process and the requirement to provide reasonable accommodations to qualified individuals with disabilities in accordance with those laws.
Fleet Maintenance Inspector (Northeast Region)
TrinityRail is searching for a Lease Fleet Maintenance Inspector to work in the Pennsylvania area. This individual will manage the maintenance, repair and regulatory compliance of railcars within assigned fleets. Assigned fleets may be customers' fleets and/or a class of Company-owned railcars such as new car fleet integration or damaged car disposition. Ensures cars meet quality, regulatory and utilization standards. Tasks may include:
Respond to and resolve customer inquiries concerning car maintenance, industry regulations, proper car use, basic construction, etc.
Determine maintenance schedules; select and expedite work through shops
Prepare and issue shopping instructions for damaged or wrongly ordered cars
Prepare repair instructions for railcars and coordinate between customers and repair shops
Analyze shop repair estimates and invoices for accuracy and potential cost savings; approve repairs and ensure all billing and repair practices meet AAR Standards
Coordinate warranty issues with railcar builders
Execute railcar dispositions
Bachelor's degree in Mechanical Engineering, Business, Finance or related field preferred
10+ years' experience managing and coordinating effective fleet maintenance, inspection and administrations systems and programs
Knowledge of railcar fabrication, maintenance, industry codes, standards and regulations applicable to railcars
Ability to interpret and evaluate engineering drawings and regulatory codes
Training in Hazmat, AWS Welding Inspection Terminology and Coating applications necessary
Excellent relationship-building skills – ability to communicate effective across all levels
Electronics Technician Maintenance II, Inspector (Nvd Repair) (2Sfab)
SENTEL Corporation is a rapidly growing, industry leader, providing professional services support to both the government and the private sector. Our core competencies include engineering, logistics, IT and mission critical support services. We provide solutions to a broad range of customers including the DoD, DHS, IRS, FAA and the Intelligence Community.
The Electronics Technician Maintenance II, Inspector (Night Vision Device Repair) is responsible for the quality control of Field and Sustainment Level maintenance such as, but not limited to troubleshooting equipment, diagnosing system malfunctions, identifying corrective actions on servicing or repairs on military and commercial equipment as prescribed in the equipment Technical Manuals (TM's) and all other applicable manuals. Performs Technical, Acceptance, Final and Classification inspections on electronic repairs.
Essential Duties and Responsibilities:
Solves problems that include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering changes.
Performs repairs, troubleshoots, and restores the equipment to an operational status.
Performs maintenance and repairs of the Night Vision Device (NVD), in accordance with the applicable regulations, technical specifications and local policies.
Performs visual inspection on equipment.
Ensures all repairs are in accordance with the original manufacturers specifications or in accordance with local guidance.
Identifies defective components. Replace/repair the defective component(s).
Performs operational check(s) to verify proper operation of equipment.
Maintains appropriate government paperwork such as, but not limited to: DA Form 5990-E per DA Pam 738-751 and files (Job Packets) necessary for the maintenance and repair of the equipment.
May provide technical guidance to lower level technicians.
Performs other duties as assigned to meet organizational/operational objectives.
Job duties and responsibilities may change due to contractual requirements.
High School Diploma or equivalent with four (4) years of experience.
Understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment.
Maintains tools and equipment, and clean work areas to maintain a safe work environment.
Ensures that all tasks are performed safely and meet Government/Army standards when applicable.
Required to maintain a valid state-issued Driver's license and applicable Government/Army license to operate vehicles.
Work well in a team environment and able to work with a diverse group of people.
Ability to complete and prioritize tasks on multiple concurrent projects within given timeframes.
Must be eligible for issue and possession of a Common Access Card (CAC).
Specific contractual requirements regarding education and experience prevail where applicable.
There may be times when an employee is exposed to extreme cold or hot weather conditions. Rarely will an employee be exposed to fumes or airborne particles, toxic or caustic chemicals, and loud noise.
Must be capable of lifting, carrying, pushing, pulling loads up to 50lbs. Must be able to climb, crawl, stoop, bend, squat, and reach as required to work on equipment.
Wears safety items of Personal Protective Equipment (PPE), e.g., gloves, safety shoes, protective eyewear, hearing protection, and other items such as aprons or outerwear as appropriate.
Applicant must provide their own tools and safety footwear.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, disability, religion, national origin, marital status, sexual orientation, ancestry, political belief or activity, or status as a veteran and any other characteristic protected by law.
SCA Electronic Technician Maintenance II - Quality Inspector
Northrop Grumman Technology Services Sector is seeking a SCA Electronic Technician Maintenance II - Quality Inspector to perform required inspections (incoming, in-process and final inspections) to ensure conformance to the Northrop Grumman Corporation Quality Management System (QMS) requirements, in support of repair/manufacturing contracts; purchase orders and/or internal work orders.
Use predetermined methods (customer specifications, technical drawings or inspection instructions and checklists) to perform both visual and mechanical inspections on various types of electronic equipment and related devices that could include electronic transmitting and receiving equipment, shop replaceable units, line replaceable units, material and/or other related parts.
Interface with internal/external organizations to address quality related issues such as non-conformances, discrepancies, scrap issues, etc.
Perform verification of standards, use of test/monitoring equipment, and documentation.
Make decisions with regard to the acceptance or rejection of work and tests performed of which records of results are maintained through the application of technical knowledge associated with product.
Monitor compliance to requirements, such as, optics handling; use of protective gloves; ear protection; safety glasses, etc.
Work is performed within the confines of standardized company and industry policies, practices and procedures.
Adheres to contract, customer and product requirements and helps to ensure continuous compliance to AS9100 standards.
Other duties include, but will not be limited to inputs in process changes to support continual process improvement, efficiency and improve productivity.
This person works under supervision receiving technical guidance from higher level technician or supervisor.
High School Diploma or equivalent, plus a minimum of 2 years of experience in a highly technical electronic environment, which includes quality inspections.
Ability to use reasoning to determine the problems encountered with inspection and testing.
Basic knowledge of the AS9100 standard.
Computer skills (i.e. MS Word and Excel) are necessary.
Technician will be required to complete J-STD-001 course and pass exam.
Must be able to obtain and maintain a Secret level security clearance.
US Citizenship required
Two-year Technical Degree or Associate's Degree in related Technical field, plus a minimum 2 years of related experience.
Active Secret clearance preferred.
Familiarity with inspection/testing of electro-mechanical components/systems.
Familiarity with controlled clean room environments.
Current IPC J-STD-001 and/or IPC-A-610 certification would be a plus.
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO. U.S. Citizenship is required for most positions.
Inspector - Construction & Maintenance
Headquartered in New Haven, Connecticut, UIL Holdings Corporation (NYSE:UIL) is a diversified energy delivery company serving a total of 690,000 electric and natural gas utility customers in 66 communities across two states, with combined total assets of over $4 billion. UIL is the parent company for The United Illuminating Company (UI), Connecticut Natural Gas Corporation (CNG), The Southern Connecticut Gas Company (SCG), and The Berkshire Gas Company (BGC), each more than 100 years old. We are seeking an exceptional individual to join our team.
Under the direction of the Construction Supervisor, this position will oversee contractor crews in the construction, operation and maintenance of gas distribution systems. The position will oversee, plan and schedule new construction work, preventive and corrective maintenance, inspections and training activities and will ensure that construction and maintenance is completed in accordance with construction standards, following approved policies, procedures, safety rules and budgets.
This position may interact with customers (internal & external) to solve problems/concerns and ensure customer satisfaction. The position is also responsible for assessing the scope of projects and assigning the appropriate crew and skills balance. Qualified candidates will arrange for any special equipment and insure that all material needs are met and will administer damage claims and billing, time sheets, store orders, work order issuance and review, material review, compliance with safety rules and regulations, standards of excellence and/or service guarantees.
The Inspector-Construction and Maintenance will monitor accuracy of gas records and standards for auditing purposes and ensure compliance and will work closely with local government agencies. In addition, this position will assist with emergency restoration and will coordinate safety and operations training, documentation, inspections, auditing and accident investigations.
The Inspector-Construction and Maintenance position requires a High School Diploma and eight years of experience. Qualified candidates must be results and customer service oriented; possess excellent interpersonal, oral and written communication skills, demonstrated supervisory skills, self-directed work skills with emphasis on multi-tasking in a changing schedule environment and strong computer skills including MS Word, Excel, project scheduling and Work requests are required.
This position also requires knowledge of labor agreement, safety manual, leak detection methods, procedures and instrumentation as well as knowledge of industry codes including Hazmat, OSHA and DOT. Qualified candidates must have a valid driver’s license and be available after hours for emergency response and critical assignments.
We are proud to be an EEO/AA employer M/F/D/V and an equal opportunity employer of individuals with disabilities. We maintain a drug-free workplace and perform pre-employment substance abuse testing.
Seasonal Property Maintenance Inspector (2 Positions In Community Development & Inspections Dept.)
General Overview of Position
This is a seasonal position responsible for conducting inspections of manufacturing, commercial, residential and vacant property in the City of Kenosha to assure compliance with the City's property maintenance site standards. This seasonal position will work up to 600 hours between May and November on an as needed basis.
Example of Duties & Responsibilities
Investigate complaints of trash and debris violations and post order to remove as needed.
Investigate complaints of graffiti violations and post order to remove as needed.
Investigate complaints of vision clearance violations and post order to remove as needed.
Investigate complaints of illegally constructed fences or fences in disrepair and post order as needed.
Investigate complaints of long grass/weeds violations and post order to cut as needed.
Investigate complaints of junk motor vehicles and refer to Kenosha Police Dept as needed.
Regularly inspect alleys for nuisance violations.
Input data on computer; verify and re-check information for accuracy.
Track and report inspections and re-inspections for outcome.
Work with City Contractor to remove nuisance violations, as needed.
Provide referrals to other City departments and agencies.
Assist in providing information to and answering questions from the public and property owners.
Attend meetings and training as required.
Perform other related work as required or assigned.
Training and Experience: High school diploma or GED; previous inspection or code enforcement experience is desired; or any equivalent combination of training and experience.
Knowledge, Abilities and
Knowledge of City geography.
Proficiency in data entry using a computer
Ability to follow instructions and work independently and problem solve.
Ability to work reasonably well with others in a courteous manner.
Ability to handle reasonably necessary stress, using tact and good judgment.
- Task involves frequent walking, standing, some lifting and carrying objects of moderate weight (12-20 pounds).
- Tasks may be performed in adverse environmental conditions such as extreme heat, rain, etc.
Task requires perception and discrimination in sound, order, visual, color, depth, and texture.
Task requires oral communication ability.
- Must have a valid driver's license and a good driving record. Must furnish own vehicle on the job and provide verification of vehicle insurance coverage (bodily injury liability of at least $100,000/$300,000). Mileage reimbursement provided at prevailing rate.
Method of Selection
Applicant's education, training and experience will be analyzed. Written oral and/or proficiency exams may be required to establish eligibility. Appointment to the position will be in accordance with City policy and Civil Service Rules and Regulations. The City of Kenosha reserves the right to further evaluate only those applicants who best meet the needs of the City.
Aviation Safety Inspector - Airworthiness
This is a permanent, full-time position located on the Regional Office, Fire and
Aviation Management, Aviation Management Staff, Regional Aviation Group, in
Redmond, Oregon. (There will be two positions filled.)
For additional information about the duties of the position, please contact Jim Reed
at or email
This is an Aviation Safety Inspector (Airworthiness) position and is primarily
responsible for the oversight and management of maintenance on the Working
Capital Fleet (agency owned) aircraft assigned to the Region, inspection and
approval of contractor and cooperator aircraft, fuel service vehicles, support
equipment, and maintenance personnel; participation on Aviation Safety and
Technical Assistance Teams (ASTAT), contract evaluation panels, base review
teams, audits and supporting Regional or other Washington Office projects.
This is a Testing Designated Position (TDP). Selectee must submit to a urinalysis to
screen for illegal drug use prior to appointment and random testing thereafter.Final
appointment and continued employment is conditional on negative results for illegal
drug use. This announcement constitutes 30 days advance notice.
The USDA Forest Service has legislative authority to recruit and fill Permanent (Career/Career-Conditional), Temporary, and Term Appointments under the USDA Demonstration Project. Under this authority, any U.S. citizen may apply.
The primary responsibilities for the incumbent are: Ensure maintenance on Working
Capital Fleet (WCF) aircraft assigned to the region is completed as required,
inspection and approval of contractor and cooperator aircraft, fuel service vehicles,
support equipment, and maintenance personnel; participation on Aviation Safety and Technical Assistance Teams (ASTAT), contract evaluation panels, base review teams, audits and supporting Regional or other Washington Office projects.
Additional duties for the incumbent include, but are not limited to; Serve as a
Contracting Officers Representative (COR) providing oversight for maintenance
and parts contracts servicing WCF aircraft, and to provide technical expertise and
advice on all issues regarding aviation maintenance. May perform routine
maintenance on agency owned aircraft on an "as needed" basis and within the
capabilities of shop facilities, tools and equipment.
The incumbent exercises privileges of a FAA certified mechanic (A&P) with
inspection authority (IA). The incumbent serves as a subject matter expert with
responsibility for assessing and determining aircraft airworthiness. Determines and
assigns tasks to aircraft mechanics or specialized technicians from other trades,
such as avionics, electrical, sheet metal, hydraulics or component overhaul.
Compiles and tracks WCF aircraft maintenance program budget requirements.
Assists in developing an annual aviation maintenance budget for WCF aircraft with
estimates and forecasts designed to facilitate program sustainability
50% or less
- Traveling between 45-70 days a year to inspect aircraft.
Who May Apply
This job is open to
US Citizens and Nationals; no prior Federal experience is required.
Job family (Series)
Conditions of Employment
You Must be a US Citizen or US National
Males born after 12/31/1959 must be Selective Service registered or exempt
Successful completion of a one year probationary or trail period.
Subject to a negative drug test prior to entrance on duty.
DRUG TESTING: This is a Testing Designated Position (TDP). Selectee must submit to a urinalysis to screen for illegal drug use prior to appointment and random testing thereafter. Final appointment and continued employment is conditional on negative results for illegal drug use.
Must possess and maintain a valid driver's license as a condition of employment.
Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement as defined below. For more information on the qualifications for this position, go to:
Minimum Eligibility Requirements For All Positions:
General Requirements for All Positions:
Not more than two separate incidents involving Federal aviation regulations violations in the last 5 years;
Valid State drivers license;
Fluency in the English language;
No chemical dependencies or drug abuse that could interfere with job performance; and
High school diploma or equivalent.
Medical Requirements for All Positions:
Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, and must meet all of the following requirements :
Have good distant vision in each eye and be able to read printed materials the size of typewritten characters (glasses and contact lenses permitted) without strain;
Have the ability to hear the conversational voice (hearing aid permitted);
Not have any physical condition that would cause them to be a hazard to themselves or others or that would interfere with their ability to fly as passengers in a variety of aircraft.
SPECIALIZED EXPERIENCE REQUIREMENTS:
One year of specialized experience or equivalent to at least the next lower grade level in the normal line of progression is required. Applicants must meet the specific requirements described below for the following types of Aviation Safety Inspector positions:
AVIATION SAFETY INSPECTOR (Airworthiness) When the predominant work involves general aviation maintenance, applicants for Aviation Safety Inspector(Airworthiness) positions must meet all of the following requirements.
Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness.
Maintenance experience with aircraft 12,500 pounds or less maximum certificated takeoff weight.
Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state or Federal governmental agency.
Aircraft maintenance work experience within the last 3 years.
FAA Mechanic Certificate with airframe and power plant ratings.
Selective Factor: Applicants must possess a current FAA Inspection Authorization.
A selective factor is a competency or other special qualification that an individual must have to be able to perform the duties of a specific position and are a part of the qualification requirements for this position; therefore, applicants who fail to meet the selective factor are ineligible for further consideration.
Work Experience: Your resume must clearly document the following for each block of work experience; the beginning day, month and year the work assignment started and ended; the hours worked per week; position title, and series and grade if applicable; and description of duties performed.
This information must be provided for each permanent, temporary or seasonal appointment/work assignment or volunteer work and should be clearly documented as a separate block of time. Incomplete, inaccurate or conflicting work history may not be credited for qualifications purposes. This can result in an applicant not being considered for the position.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
To receive consideration for this position, you must meet all qualification requirements by the closing date of the announcement.
TIME IN GRADE REQUIREMENT: If you are a current federal employee in the General Schedule (GS) pay plan and applying for a promotion opportunity, you must meet time-in-grade (TIG) requirements of 52 weeks of service at the next lower grade level in the normal line of progression for the position being filled. This requirement must be met by the closing date of this announcement.
BACKGROUND INVESTIGATION AND FINGERPRINT CHECK: Selection and retention in this position is contingent on a successfully adjudicated FBI National Criminal History Check (fingerprint check) and a background investigation.
: To exercise selection priority for this vacancy, CTAP/RPL/ICTAP candidates must meet the basic eligibility requirements and all selective factors. CTAP/ICTAP eligibles must meet the agency's definition for a quality candidate as provided in the How You Will Be Evaluated section of this announcement to be considered.
- Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to a financial institution of your choosing.
E-Verify: Federal law requires agencies to use the E-Verify system to confirm the employment eligibility of all new hires.
If you are selected as a newly hired employee, the documentation you present for purposes of completing the Department of Homeland Security (DHS) Form I-9 on your entry-on-duty date will be verified through the DHS 'E-VERIFY' system. Under the system, the new hire is required to resolve any identified discrepancies as a condition of continued employment.
This position is eligible for telework and other flexible work arrangements.
This is a bargaining unit designated position.
This is a bargaining unit position represented by the National Federation of Federal Employees, IAMAW.
We may select from this announcement or any other source to fill one or more vacancies.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
You will be evaluated in accordance with the category rating procedure as defined in the USDA Demonstration Project Plan. Applicants who meet the basic minimum qualification requirements established for the position will be placed in the Eligible category.
Eligible applicants will be further evaluated against criteria for placement in the Quality category. This evaluation is based on the level of your experience, education, and/or training as determined by your responses to the Assessment Questionnaire. Applicants with veterans' preference are listed ahead of applicants who do not have veterans' preference within each category.
Note: If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating may be lowered to more accurately reflect the submitted documentation. Please follow all instructions carefully. Errors or omissions may affect your rating. Providing inaccurate information on Federal documents could be grounds for non-selection or disciplinary action up to including removal from the Federal service.
Clicking the link below will present a preview of the application form; i.e. the online questionnaire. The application form link below will only provide a preview and does not initiate the application process. To initiate the online application process, click the "Apply" button to the right.
To view the application form, visit:
Background checks and security clearance
The following documents are required for your applicant package to be complete. Our office cannot be responsible for incompatible software, illegible fax transmissions, delays in the mail service, your system failure, etc.
Encrypted documents will not be accepted. Failure to submit required, legible documents may result in loss of consideration.
Resume that includes: 1) personal information such as name, address, contact information; 2) education; 3) detailed work experience related to this position as described in the major duties including work schedule, hours worked per week, dates of employment; title, series, grade (if applicable); 4) supervisor's phone number and whether or not the supervisor may be contacted for a reference check; 5) other qualifications.
If education is required or you are using education to qualify, you must submit a copy of your college transcripts. An unofficial copy is sufficient with the application; however, if you are selected, you will be required to submit official transcripts prior to entering on duty. Education must have been successfully obtained from an accredited school, college or university. If any education was completed at a foreign institute, you must submit with your application evidence that the institute was appropriately accredited by an accrediting body recognized by the U.S. Department of Education as equivalent to U.S. education standards. There are that specialize in this evaluation and a fee is normally associated with this service. All transcripts must be in English or include an English translation.
If claiming, you must submit a DD214, Certificate of Release from Active Duty, which shows dates of service and discharge under honorable conditions. If currently on active duty you must submit a certification of expected discharge or release from active duty service under honorable conditions not later than 120 days after the date the certification is submitted. Veteran's preference must be verified prior to appointment. Without this documentation, you will not receive veteran's preference and your application will be evaluated based on the material(s) submitted.
If claiming 10-point veteran's preference you must provide the DD214 or certification requirements (see above bullet), plus the proof of entitlement of this preference as listed on the SF-15 Application for 10-point Veterans' Preference. The SF-15 should be included but is not required. Failure to submit these documents could result in the determination that there is insufficient documentation to support your claim for 10-point preference.
Surplus or displaced employees eligible for CTAP, RPL, or ICTAP priority must provide: proof of eligibility (RIF separation notice, notice of proposed removal for declining a transfer of function or directed reassignment to another commuting area, notice of disability annuity termination), SF-50 documenting separation (as applicable), and your most recent SF-50 noting position, grade level, and duty location with your application per 5 CFR 330.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
This job originated on . For the full announcement and to apply, visit . Only resumes submitted according to the instructions on the job announcement listed at will be considered.
Lead-Based Paint Inspector Technician/ Visual Inspector
Compliance and Sustainable Services Group - Lead-based Paint Inspector Technician/ Visual Inspector
CONNOR is a Baltimore, Maryland based Environmental Compliance Design and Real Estate Due Diligence firm. Formed in 1991, CONNOR has grown to 20 professionals, providing services in over 20 states. We provide a full range of compliance services including but not limited to: inspections, risk assessments, treatment design, closure documentation, due diligence, and staff training. Our specialized marketplaces include Aerial Services – Unmanned Aerial Vehicle (UAVs) and Forensics Services (Property Damage and Bodily Injury). Satellite or remote work locations include Mount Pleasant, SC, and Stamford, CT.
CONNOR seeks Lead-based Paint Inspector Technicians/ Visual Inspectors to primarily support our Compliance and Sustainable Group in the Baltimore/Washington market. Initial focus will be on our lead-based paint activities with chance to cross train into other areas. CONNOR offers the training you'll need to succeed. As a whole, the company is committed to ensuring that every person is actively working towards bettering the company, our product, as well as, benefiting personally and professionally. We offer a comprehensive benefits package, including company health care, 401(k), flexible medical spending accounts, flexible dependent care accounts, and paid vacation, holiday and sick leave.
Ability to work with CONNOR Management System (project software package). Training will be provided.
Ability to operate without daily direct supervision.
Ability to work a full day on the subject property and proof your work in the evening.
Ability to be responsible for your own actions.
Ability and desire to be the best at what you do.
Ability to function in a team environment to ensure the successful completion of a project. Work hours as assigned by the Operations Manager.
Conduct yourself in accordance with company policy and procedures.
Wear company provided uniforms.
Produce accurate and reliable data.
Maintain/protect company equipment/materials – prevent loss from theft or damage.
Daily regional travel within the Greater Baltimore Metropolitan area.
Any and all other duties as assigned by the Operations Manager.
Ability to communicate with the general public.
Ability to manage your time and schedule.
Ability to work in urban communities.
Entry level position which requires an average to above-average computer proficiency (i.e. Windows O.S. and Windows Office applications).
Must be able to commute daily to both Baltimore and the District of Columbia metropolitan area, as necessary. Reliable self-provided transportation is a must.
Must be able to commute daily to greater Baltimore/Washington Metropolitan Area as necessary. Reliable self-provided transportation is a must.
Ability to multitask, prioritize, and work efficiently; stellar communication skills; strong attention to detail; advanced writing and review skills; technical familiarity; proficiency in time management; strong teamwork ability; mindful of deadlines and event dates; and task oriented.
Education (Documentation will be required)
High School graduate with some college preferred but prior Environmental or Construction experience can offset college preferences
Successful completion of the program training course, homework assignments and course exam EACH with a test score of greater than or equal to 80%.
- Maryland Lead-based Paint Inspector and Visual Paint Inspector licenses within three months of employment.
- Attend protocol refresher training in accordance with the schedule and pass protocol training with a test score of greater than 80%.
- Reliable automobile and proof of current automobile insurance.
Other licenses/certifications as determined by the Department Head or Operations Manager.
Compensation: $28,000.00/year – Salaried Full time.
Benefits (In accordance with CONNOR policy):
- Free Parking
- CONNOR uniforms
- Health and Dental Insurance
- Vacation, Sick and Personal Leave
- Mileage reimbursement
Inspector Quality Control Inspector - 1St, 2Nd, & 3Rd Shifts
Pace Industries is North America's leading full-service die casting manufacturer. Our mission is to provide uncommon, creative die casting and support solutions that contribute to the success of our customers. Our die cast parts are used in automobiles, motorcycles, generators, snow mobiles, lawn mowers, washing machines, power hand tools, BBQ grills, commercial lighting and many other well-known products. You can have a significant impact on our cultural transformation.
The St. Paul Division produces aluminum die castings for highly cosmetic, complex and difficult-to-fill parts from concept to solution. Specializing in flash-free, net-shape production, we ensure that aluminum die cast components meet exact design specifications and are delivered on time and within budget.
Perform Quality Control functions as defined in procedures and work instructions to assure that customers receive good parts. Works with variable supervision to set up and operate any inspection equipment or gauging. Supports production operators by routinely auditing production processes and performing various inspections. Maintains a positive attitude towards problem solving and a commitment to continuous improvement.
Duties and Responsibilities:
Inspect and record all parts at specified frequencies, with specified lot size, in accordance with approved Quality Control procedures with calibrated gages and measuring devises to ascertain Quality.
Inspect and approve first piece production on any new set-ups.
Perform audit of warehouse to ensure product is properly packed, identified and stored as required by procedures and work instructions appropriate for part status.
Perform an audit of product to be shipped to ensure all move sheet steps have been completed and signed off, all contractually required paperwork is with product and product is properly packed.
Make sure all suspect parts have been properly tagged and sent to the designed holding areas.
Maintain files as per prescribed by work instructions on procedures.
Capable of learning computer skills necessary to perform spectrometer analysis and to generate metal department reports.
Prepare alloy samples for analysis.
Calibrate and maintain Spectrometer to operating specifications.
Operate Spectrometer for alloy analysis
Consult with the Quality Supervisor or the Quality Engineer on any matters pertaining to Quality of product or process.
Position can be exposed to a harsh operating environment, which includes: heat up to 100 degrees.
Perform other associated duties as needed to continue the productive operation of the department and division.
High school diploma or GED equivalent and 2 years' experience in quality assurance inspection.
Must understand concepts of geometric dimensioning, tolerancing and part inspection.
Previous experience in operation of CMM or demonstrate ability to be trained in operation of CMM.
Please note that the duties and requirements described herein are intended to represent general contents of this job. This is not to be construed as an exhaustive statement of duties and responsibilities.
Pace Industries has a strong commitment to the principle of diversity, and in that spirit, seeks a broad spectrum of candidates including women, minorities, veterans, and people with disabilities. Individuals with disabilities desiring accommodations in the application process should notify the hiring department by the application deadline.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!