Metal Fabricator Helper Job Description Sample

POSITION OVERVIEW

Position may bework in Round, Spiral, Fittings, or Tack departments and will be responsiblefor the following but not limited to fabricating finished products from sheetmetals using hand and power tools to cut, shear, notch, and form material andprefab fittings

KEY ESSENTIAL DUTIES AND RESPONSIBILITIES

• Insulates and assembles product for delivery

• Identifies and calculates amount of materials, thickness, size, etc., required for product

• Completes usage forms and logs completed orders

• Sets up and operates all machinery and hand tools needed to complete product

• Forms all shapes and sizes of sheet metal as per drawings or work instructions

• Changes dies and performs basic machine maintenance as required

• Verifies dimensions of work piece

• Other duties may be assigned

SUPERVISORY RESPONSIBILITIES

This job has no supervisory responsibilities.

QUALIFICATIONS

To perform this jobsuccessfully, an individual must be able to perform each essential dutysatisfactorily.

The requirementslisted below are representative of the knowledge, skill, and/or abilityrequired.

Reasonableaccommodations may be made to enable individuals with disabilities to performthe essential functions.

EDUCATION and/or EXPERIENCE

High schooleducation or GED Required

LANGUAGE SKILLS

Ability to read andinterpret documents such as safety rules, operating and maintenanceinstructions, and procedure manuals. Ability to write routine reports andcorrespondence. Ability to speak effectively before groups of customers oremployees of organization.

MATHEMATICAL SKILLS

Ability tocalculate figures and amounts such as discounts, interest, commissions,proportions, percentages, area, circumference, and volume. Ability to applyconcepts of basic algebra and geometry.

Able to read a tapemeasure up to a 16th of an inch.

REASONING ABILITY

Ability to applycommon sense understanding to carry out instructions furnished in written,oral, or diagram form. Ability to deal with problems involving several concretevariables in standardized situations. Ability to adhere to delegation ofauthority and lead by instructions of management and supervision.

CERTIFICATES, LICENSES, REGISTRATIONS

Nonerequired.

COMPUTER SKILLS

Basiccomputer skills may be preferred or required.

TRAVEL REQUIREMENTS

None Required

OTHER SKILLS AND ABILITIES

Attendance is anessential job requirement defined as having regular, consistent, reliable,punctual and predictable attendance including the ability to work regular hoursand shifts, overtime before and after shifts and on weekends. Ability to workas part of a team, including all related departments/plants or independently asrequired achieving internal and external customer satisfaction.

PHYSICAL DEMANDS

The physicaldemands described here are representative of those that must be met by anemployee to successfully perform the essential functions of this job.Reasonable accommodations may be made to enable individuals with disabilitiesto perform the essential functions.

While performingthe duties of this job, the employee is regularly required to stand; walk; usehands to finger, handle, or feel; and reach with hands and arms. The employeefrequently is required to stoop, kneel, crouch, or crawl. The employee isoccasionally required to sit and talk or hear. The employee must regularly liftand/or move up to 50 pounds, frequently lift and/or move up to 100 pounds, andoccasionally lift and/or move up to 200 pounds with the assistance of otheremployees. Specific vision abilities required by this job include close vision,depth perception, and ability to adjust focus.

WORK ENVIRONMENT

The workenvironment characteristics described here are representative of those anemployee encounters while performing the essential functions of this job.Reasonable accommodations may be made to enable individuals with disabilitiesto perform the essential functions.

While performingthe duties of this job, the employee is regularly exposed to moving mechanicalparts.

The employee isfrequently exposed to vibration. The employee is occasionally exposed to fumesor airborne particles, toxic or caustic chemicals, and risk of electricalshock. The noise level in the work environment is usually loud.

#External

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

The requirements listed below are representative of the knowledge, skill, and/or ability required.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

#External

Overview

The Metal Fabricator fabricates and assembles structural steel products for industrial automation, such as mezzanines, platforms, support structures and weldments.

Responsibilities

• Sets up and operates fabrication machines, such as brakes, rolls, shears, flame cutters, and drill presses

• Creates and assembles metal workpieces

• Follows specifications in job orders, verbal instructions, and blueprints

• Observes machine operation to detect workpiece defects or machine malfunction

• Measures workpiece dimensions to determine accuracy of machine operation

• Performs minor machine maintenance such as oiling machines, dies, or workpieces

Qualifications

• High School Diploma or equivalent

• Minimum of 1 year of experience preferred

• Ability to read blueprints

• Knowledge of standard and metric measurements

• Knowledge of quality assurance and self-inspection techniques

• Self-motivated and detail-oriented

• Team orientation

EOE Minorities/Women/Disabled/Veterans

Federal Contractor

If you need assistance applying to an open position online, please email Careers@Wynright.com.

Coastal Fabrication specializes in custom fabrication of sheet metal and architectural metal products, but we do more than just bend metal. We are a full-service custom fabricator that will tailor our services to fit our customers' needs.

We're currently seeking to hire either a part-time or full-time Metal Fabricator. Responsibilities include:

• Fabricate a variety of items from small home projects to large industrial needs. Heavy focus on non-welding fabrication.

• Solder, and hand rivet materials.

• Inspect completed products to ensure accuracy according to shop drawing and/or blue print.

• Select appropriate type of metal and gauge required to fabricate items.

• Determine the best use of the material to limit waste when cutting the flat sheet.

• Operate tools and equipment such as snips, power hand shear, nibbler, stomp shear, and CNC shear.

• Operate fabricating machines such as hand tongs, hand brake, box and pan brake, and CNC Autobrake.

• Use scriber's, dividers, and squares to mark dimensions on materials.

• Load and unload trucks.

Requirements

• At least one of year of fabrication experience preferred.

• Ability to read shop drawings and/or blue prints.

• Ability to operate a forklift.

• Work skillfully with tools, metals, and machinery.

• Work within precise limits and standards of accuracy.

• Working knowledge of basic math skills for material calculations and programing.

• Within 120 days, obtain basic hand tools such as left/right hand snips, tape measure, hammer, speed square, and hand rivet gun. All other tools will be provided.

• At least 18 years of age.

• MUST have a do what it takes attitude

Looking for candidates with availability to work weekdays. We offer a competitive salary and a full benefits package for full-time employees.

BASIC FUNCTION

To adjust and operate computer numerically controlled machines relating to sheet metal fabrication which could include lasers and press brakes.

To perform program editing and occasional programming of laser when appropriate.

To program and run CNC press brake.

To utilize and operate proper material handling equipment.

To operate any auxiliary machines as assigned.

Responsible for own set-ups and inspection of parts produced.

Parts must be made to print and process specifications.

Responsible for all safety rules, operator preventive maintenance, producing quality workmanship, and for good housekeeping in and around the work area.

Completion of all associated paperwork and record keeping as required.

EDUCATION/TRADE KNOWLEDGE

High school diploma or equivalent.

Core skills training in basic shop math, measuring tools and blueprint reading or demonstrated equivalent knowledge is required.

Additional required courses include: Progressional CNC training, Sheet Metal I, II and III or demonstrated equivalent knowledge.

Completion of PMA Press Brake Operator training will be required upon entry to the classification or equivalent demonstrated knowledge.

EXPERIENCE

Three or more years proven sheet metal experience.

Experience or demonstrated abilities in basic machining.

Experience or applicable technical training in tool and die, or demonstrated abilities.

About The Toro Company:

The Toro Company (NYSE: TTC) is a leading worldwide provider of innovative solutions for the outdoor environment, including turf, snow and ground-engaging equipment, and irrigation and outdoor lighting solutions.

For over 100 years, our ideas have transformed the way professionals and homeowners care for their outdoors, including many leading sports venues and historic sites around the world. Across our strong family of brands, our success is founded on building trusted relationships, creating innovative products and following ethical business practices - ideals shared by our nearly 7,000 employees around the world. With sales of $2.4 billion in fiscal 2015, Toro consistently delivers strong financial performance and market leadership.

We are proud to be an equal opportunity employer including protected veterans and individuals with disabilities

We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.

Under close supervision, performs a variety of operations associated with layout and fabrication of a variety of sheet metal-constructed products and equipment, including water and oil/gas well screens, powdered metal liners, and molded products. Such machines may include press brakes, sheer, punch press, trace torch, metal roll, punch, iron worker, hand torch, numerical control torch, numerical control punch, powdered metal mixers, rubber press, etc. Skills typically acquired through 1-2 years related metal fabrication experience.

Halliburton is an Equal Opportunity Employer.

Location
260 S Panther Blvd, Powell, Wyoming, 82435, United States

Job Details

Requisition Number: 59164

Experience Level: Experienced Hire

Job Family: Manufacturing & Supply Chain

Product Service Line: Artificial Lift

Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information

Compensation is competitive and commensurate with experience.

Nearest Major Market: Wyoming

Job Segment: Fabrication, Supply, Supply Chain, Manufacturing, Operations

Purpose

LaForce is looking for a 1st Shift Metal Fabricator to be responsible for set-up and operation of CNC Mechanical Shear, Hydraulic Press Breaks and Punch Presses in the fabrication process of hollow metal frames and frame components.

Major Responsibilities

• Set-up and operation of spot welding equipment

• Interpret pertinent information from shop orders, shop drawings and frame templates

• Safe operation of fork lift trucks for movement of materials

• Maintain accurate paper work and record keeping

• Assist in other operations as needed

Qualifications

• High school diploma or general education degree (GED), and one to three months of related experience and/or training.

• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

Physical Demands

• The employee is required to frequently use hands to lift up to 69# Floor to 60", carry up to 69#, and push/pull up to 100# force.

• The employee is required to occasionally sit, climb or balance (in and out of fork lift), talk or hear, grip up to 75# Force and climb/balance or step up 19"

Benefits

LaForce offers great benefits and a fun, professional working environment.

• First Shift Hours of the position: Monday

• Thursday

• 6:30am

• 3:15pm; Friday 6:30am

• 12:15pm

• 401K plan with a match

• Medical Coverage

• Dental Coverage

• Vision Coverage

• Paid time-off (Vacation and Sick time)

• Tuition Reimbursement

• Company Wellness Program

• Company Provided Tools

Sheet Metal Fabricator

Direct Hire

$50-55K/year

Monday-Friday

7:00am-3:30pm

5+ years of experience working with sheet metal.

Must be able to read blueprints.

Responsibilities include:

Fabricating and assembling structural metal products, such as framework for machinery and metal parts according to job order.

Developing layout and plans.

Setting up and operating fabricating machines for sheet metal, such as brakes, rolls, shears, flame cutters and drill press.

Designing and constructing templates and fixtures.

Fabricating and sheet metal products.

If you are interested, apply directly or forward your resume to

Why Kelly

?

At Kelly

Services , we work with the best. Our clients include 95 of the Fortune

100 companies, and more than 70,000 hiring managers rely on Kelly annually to access

the best talent to drive their business forward. If you only make one career connection today, connect

with Kelly.

AboutKelly Services

As a workforce advocate for over 70 years, we are proud to directly employ nearly 500,000 people

around the world and have a role in connecting thousands more with work through our global network of

talent suppliers and partners. Revenue in 2017 was $5.4 billion. Visit kellyservices.com and connect with us on Facebook, LinkedIn and Twitter .

Kelly Services is an equal opportunity employer including, but not limited to, Minorities, Females,

Individuals with Disabilities, Protected Veterans, Sexual Orientation, Gender Identity and is

committed to employing a diverse workforce. Equal Employment Opportunity

is The Law.

Responsibilities

Every day, in nearly 100 countries around the world, millions of people depend on Daktronics scoring and display systems for information and entertainment. Our displays provide vital travel information in airports and train stations and along highways. They advertise the price of gas, store specials, and more as you make your daily commute. They also enhance spectators' experiences at sporting events of all kinds, from Little League to the major leagues.

The manufacturing facility located in Sioux Falls, SD will support the billboard and fuel light niches within the Commercial market. The factory will be responsible for the timely and quality production of digital billboards, fuel lights displays, and additional products as business needs demand.

As a feeder department, the Metal Fabrication Department is responsible for maintaining a constant supply of cabinets to the final assembly departments.

The shift for this position is: 6:00pm-6:00am Monday – Wednesday

• Setup and operate a variety of machines (for example: notches, shear, turret punch, press brake). Operate some computer-controlled machines. Basic layout. Use precision measuring instruments, calipers, square, etc.

• Safely and responsibly use tools, including air driven, power, manual and other tools (for example: drills, riveting guns).

• Follow written instructions and blueprints. Record work done. Perform basic math calculations.

• Accurately and consistently complete quality work in a timely manner. Inspect own work. Quickly learn new tasks. Accurately and consistently complete repetitive tasks.

• Work effectively as a team member; work with little supervision; help when and where needed; make suggestions for process and product improvement; communicate effectively with team members. Follow company guidelines.

• Willing to work in any manufacturing department through flexibility.

• Learn and follow company policies and procedures.

• Complete other duties as assigned to meet internal and external customer needs.

Qualifications

• High school diploma or GED required.

• Current or previous successful metal fabrication experience preferred.

• Good communication skills. Fluent in English; verbal and written.

• Ability to learn quickly.

• Ability to successfully participate as a member of a team.

• Ability to work with minimum supervision.

• Regularly and reliably work the scheduled hours. Ability to work overtime when workload requires.

• Wear all proper protective equipment as required in work area in accordance with Daktronics Safety Policy and OSHA standards. Items may include: safety glasses, safety shoes/boots, hearing protection and electrostatic discharge wear.

• Physical requirements include the ability to:

• distinguish and identify wire and paint colors;

• read fine print with or without the use of corrective lenses

• work with odors (solder/paint/solvent/manufacturing odor);

• lift and carry heavy (up to 50 lbs) and/or awkward items

• stand or sit for the full shift and have full range of motion (including but not limited to bending and lifting) required to perform the job functions

• maintain steady hand-eye coordination

• reach in all directions and in potentially awkward positions

• Motor Vehicle Record and Background check will be conducted

• Daktronics does not sponsor, renew, or extend immigration visas for this position.

Daktronics is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, creed, religion, color, national origin, sex, age, disability, genetics, marital status, sexual orientation, gender identity, protected veteran status, or citizenship status. If you would like more information on your EEO rights under the law, please click here.

Commercial/Industrial Sheet Metal Fabricator

Sun Mechanical is currently hiring an experienced Commercial/Industrial Sheet Metal Fabricator.

Requirements

• Minimum of 3 years' experience in welding mig/tig

• Brake, shear

• Can operate a Forklift

• Reliable and solid attendance

• Will be required to perform routine & heavy physical work

• Able to work with limited supervision

• Able to read & understand cut sheets

Sun Mechanical employees enjoy many benefits including: 401k, medical, vision, dental, paid time off, paid holidays, and competitive salaries.

Click here to download an application and submit it to sunjobs@sunmechanical.net or stop by our offices (3951 E. Columbia Street) between 7:00 a.m. – 3:30 p.m. to apply in person.

Construction Facilities Custodian

Sun Mechanical is currently hiring an experienced Construction Facilities Custodian.

Daily Duties

• Collects trash and/or boxes for breakdown

• Cleaning break and coffee area

• Empties trash cans for the shop

• Cleans shop restrooms

• Maintains supplies for office and shop restrooms

• Cleans work bays and all work areas in the shop

• Sweeps floors

• Dusts shop walls and pathways

• Cleans outside shop and office area

Miscellaneous

• Coordinates ordering of cleaning and bathroom supplies (paper goods, cleaners, etc.)

• Assists site material coordinator

• Operate company vehicle

• Assists field/office when needed

• Other duties as assigned

Requirements

• Previous janitorial experience a plus

• Problem-solving abilities with an eye for safety and improvement

• Punctual with excellent attendance

Click here to download an application and submit it to sunjobs@sunmechanical.net or stop by our offices (3951 E. Columbia Street) between 7:00 a.m. – 3:30 p.m. to apply in person.