Mixer Operator Helper Hot Metal Job Description Sample
Hot Metal Crane Operator
Division: Nucor Steel Memphis, Inc.
Location: Memphis, TN, United States
Other Available Locations: N/A
Basic Job Functions:
Operate cranes for lifting, moving, or placing loads. Inspect and adjust crane mechanisms or lifting accessories to prevent malfunctions or damage. Inspect cables or grappling devices for wear and install or replace cables, as needed. Determine load weights and check them against lifting capacities to prevent overload. Clean, lubricate, and maintain mechanisms such as cables, pulleys, or grappling devices, making repairs as necessary. Perform operation in a cab or remote crane to service the EAF, LMF, VTD, CCM, and Refractory areas. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
1.Ability to work in a demanding environment.
2.Ability to lift 50 lbs. on a regular basis.
3.Willing to work rotating shifts, holidays, and overtime as required.
4.Selected candidate must pass a depth perception test prior to assuming crane position.
Detailed Selection Criteria:
1.Safety and attendance record.
2.Strong commitment to safety in all job aspects.
3.Knowledge of melt shop operations, clean steel practices, and costs.
4.Supervisor recommendations and performance review.
5.Proven problem solving and troubleshooting abilities.
6.Effective written and verbal communication skills as well as effective computer skills.
7.Ability to follow instructions carefully.
8.Ability to multitask and adapt to process changes under pressure.
9.Team player that works effectively in a group.
10. Cross-training experience in this position or other relevant crane experience.
1.Prior experience in operations in the melt shop where hot metal cranes are used.
Nucor is an Equal Opportunity/Affirmative Action Employer – M/F/Disabled/Vets – and a drug – free workplace
Hot Stamp Press Operator
Req ID#: 12951BR
Under general direction from team manager and in conjunction with team members, contribute to company quality and service commitments by operating equipment, such as, Single Color, Sheet Fed or Continuous/Web presses. Runs mostly standard work and basic manual numbering may be required. Automated or basic setups and changeovers may be required.
Perform a complete set-up of press in an efficient manner, which may include: identifying and loading correct stock, setting correct paper path and stretch, mounting plates, die registration, making appropriate adjustments to the ink and water levels, assuring accurate single-color register and setting up any attribute functions, e.g. perforations, number, file holes, thermo unit, etc.
Determine and understand all order instructions and running of press productively while, meeting job requirements of ink density, ink and water balance, color matching, and required attributes at a quality level that meets or exceeds our customer's expectations.
Maintain the ability to troubleshoot mechanical breakdowns; demonstrate the ability to make adjustments to the equipment including blanket changes, wash up units, cleaning water system and roller settings as required.
Perform daily, weekly, and monthly preventative maintenance and cleaning to ensure a quality product to customer as required. Understand all press controls and demonstrate their use.
Maintain knowledge of the press, current printing processes and develop continuous process improvements that support the Lean philosophy and work environment.
Maintain company quality standards, service levels and customer expectations by meeting or exceeding department/cell goals and customer specifications. Examples may include: maintaining acceptable ink densities, troubleshooting lithographic press settings and willingness to cross train other team members.
Contribute toward team effectiveness and workflow efficiency by rotating duties as needed.
Maintain customer confidence and protect operations by keeping information confidential.
Maintain safe and clean working environment by complying with procedures, rules and regulations.
Support operations and contribute toward team results by performing other production or related jobs as required.
Position may include other duties as determined by the company.
Required: • High School (or equivalent)
0-1 years of experience in Printing
Familiar with product, equipment, printing process and ink usage preferred.
Basic math and reading skills; basic computer knowledge.
Ability to perform work with a high level of accuracy; detail oriented; ability to handle multiple priorities.
Mechanical ability to operate and maintain press as required.
Deluxe Corporation is an Equal Opportunity / Affirmative Action employer:
All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, disability, sex, age, ethnic or national origin, marital status, sexual orientation, gender identity or presentation, pregnancy, genetics, veteran status or any other status protected by state or federal law.
Please view the electronic
Job Posting Title:
Summary/Objective: The Mixing Operator position is responsible for a variety of tasks related to the preparation and mixing an array of finished doughs. This position uses a standardized process to accurately combine ingredients in a mixer to produce quality doughs per recipe instructions.
Essential Functions/Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Understand all aspects and layout of operating the mixer(s) on the assigned line. Run production properly according to the applicable schedule to mix the correct dough for the process.
Obtain recipe sheets and mix dough(s) applicable to the assigned line(s). Weigh, dump, and add by hand raw ingredients required to make the appropriate dough(s) or other mixes. Complete and understand the mixing report in a timely and accurate manner. Properly record all information such as date, name, ingredient, amounts, lot, manifold numbers, etc.
Manage the inventory control system appropriately. Operate either a walk-behind hand dolly or dough dolly to move ingredients in troughs from one work area to another, including the mezzanine if necessary. If necessary to use powered industrial equipment, the employee must obtain and maintain the appropriate powered equipment or aerial lift certification to do so immediately.
The employee must possess a basic understanding of math and a knowledge of measurements associated with reading a measuring instrument. Must understand basics of scale operations and weights. Accurately record JDE lot numbers, pallet ID numbers, and manifold numbers on mixing report for raw ingredients.
Understand the layout of the Proof Room and of the assigned mixing equipment. Perform visual inspections of raw materials and of products produced, including maintaining proper level in the lay-time conveyor, and notify management when an issue or concern is first noted. Operate mixing equipment including, but not limited to: all panel view screens, steam and chilled water jackets, scales, and DSI scanners.
Must be able to train other team members on process/machinery as necessary. Understand, observe and comply with the handling/usage of color-coded container policy. Maintain clean work environment and prepare work area for following shift personnel.
Possess thorough understanding of all company policies, including GMPs and safety policies. Communicate effectively with other departments, managers, and other employees. Immediately notify maintenance, line operations or supervision of any repairs or adjustments required.
The employee may have to arrive earlier/later than normal when start-ups or changeovers to different products occur. Check schedule regularly.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job:
While performing the duties of this job, the employee is regularly required to talk and hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
This position is very active and requires standing, walking, kneeling, twisting, holding, gripping, reaching, pulling, stooping, extensive bending, kneeling, crouching, crawling, extensive wrist movements, and climbing all day. Work can be performed in extreme heat and cold environments. Must possess manual dexterity necessary to operate equipment and handle product appropriately.
The employee must frequently lift and/or move items weighing 50 pounds above shoulder level. The employee must be able to read, write, and comprehend the English language. The employee must work safely at all times and follow all OSHA (safety) guidelines.
Food Quality, Safety and Security: The employee initiates action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality or safety system.
The employee stops production, if necessary, to correct food safety issues, quality issues, or safety problems. The employee identifies and records any problems relating to food safety, quality of the product, processes, quality system or safety system.
The employee controls further processing or delivery of nonconforming product in terms of food safety or quality issues until the deficiency or unsatisfactory condition has been corrected. The employee informs line supervisor, production manager, QA manager, or other management personnel of any food safety or quality issues or of any processes which become noncompliant with specified requirements.
Technical Capacity. Ethical Conduct.
Communication Proficiency. Results Driven. Initiative.
Supervisory Responsibility: This position has no supervisory responsibilities.
Work Environment: While performing the duties of this job, the employee may be exposed to fumes or airborne particles, heat, cold, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud.
Position Type/Expected Hours of Work: This is a full-time position, with rotating days off lasting a minimum of 8 hours and a maximum of 12 hours in most circumstances. The employee must be able to work overtime when required.
Travel: No travel is expected for this position.
Required Education and Experience: High school diploma/GED is required.
Preferred Education and Experience: Two+ years of manufacturing experience is preferred.
Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.
TreeHouse Foods is an Equal Employment Opportunity Employer and offers opportunities to all job seekers, including those with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, please contact us by sending an email to firstname.lastname@example.org. In your email please include a description of the specific accommodation you are requesting and a description of the position for which you are applying.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
Machine Operator - Metal Fabrication In Chippewa Falls
Kelly Services in partnership with our customer in Chippewa Falls is seeking candidates for several openings in a growing custom metal fabrication facility. These are long term positions with great potential for hire.
Position duties vary but we are seeking candidates that have some prior experience in manufacturing (previous press brake or metal fab exp would be fantastic!), ability to read blue prints, good computer/math skills, and desire to learn!
Opportunities currently available include:
Laser Operator: 2nd shift Monday-Thursday 7:45pm-6:15am
Shipping and Receiving: 1st shift Monday-Thursday 6:00am-4:30pm
General Machinging: Position can be on either 2nd shift (Mon-Thurs 7:45pm-6:15am) or W/E shift (Fri-Sun 6:00am-6:30pm)
Pay based on experience and qualifications!
Please contact Kelly Services today to learn more about these positions. You may reach our office at 715.834.8001 or by email at ANGJ432@kellyservices.com.
Previous experience in sheet metal fabrication or other manufacturing is preferred. Ability to read blueprints desired.
As a Kelly Services candidate you will have access to numerous perks, including:
Exposure to a variety of career opportunities as a result of our expansive network of client companies
Career guides, information and tools to help you successfully position yourself throughout every stage of your career
Access to more than 3,000 online training courses through our Kelly Learning Center
Weekly pay and service bonus plans
At Kelly Services®, we work with the best. Our clients include 95 of the Fortune 100™ companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly.
About Kelly Services®
As a workforce advocate for over 70 years, we are proud to directly employ nearly 500,000 people around the world and have a role in connecting thousands more with work through our global network of talent suppliers and partners. Revenue in 2017 was $5.4 billion. Visit kellyservices.com and connect with us on Facebook, LinkedIn and Twitter.
Kelly Services is an equal opportunity employer including, but not limited to, Minorities, Females, Individuals with Disabilities, Protected Veterans, Sexual Orientation, Gender Identity and is committed to employing a diverse workforce. Equal Employment Opportunity is The Law.
Previous experience in sheet metal fabrication or other manufacturing is preferred. Ability to read blueprints desired.
HSC Metal Cell Operator
Job Description:Job Summary:
To Blend castings to meet visual specifications.
Follow safety requirements.
Read and follow work instructions.
Lift with a mechanical lifting device.
Record data either manually or by computer as required.
Operate and maintain blast cabinets, Burr guns, belt sanders, visual tools, and dimensional gauges.
visually inspect castings.
Interact with a variety of team members to ensure product specifications and defect removal.
Other duties as assigned.
high school diploma or general education degree (GED).
three months manufacturing experience
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S.
Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
Mixer Operatorreq9101 Employment Type: Regular Location:
RICHMOND,CA Have you ever enjoyed Arnold®, Brownberry® or Oroweat® bread? A Thomas’® English muffin or bagel? Or perhaps snacked on a Sara Lee®, Entenmann’s® or Marinela® cake or donut?
If the answer is yes, then you know Bimbo Bakeries USA! Bimbo Bakeries USA is part of Grupo Bimbo, the world’s largest baking company with operations in 32 countries. Bimbo Bakeries USA (“BBUSA”) includes BBUSA and its subsidiaries and affiliated entities, including, but not limited to, Wholesome Harvest Baking, East Balt, and Acelerada.
BBUSA employs 20,000 associates across the U.S. in bakeries, sales centers, corporate offices and on sales routes to ensure our consumers have the freshest products to feed their families at every meal. But our associates come to work for much more – the chance to feed their own lives through exciting work that offers the opportunity to make a real difference in their professional and personal lives every day. Description:Top reasons to choose BBU:
Competitive starting rate Medical/ dental benefits with low premiums 401K Retirement plan BBU wellness program available Growth Opportunities We value the person Essential roles and responsibilities: Checks recipes, retrieves raw product/ingredients and prepares (scales) containers/measures for placement into industrial mixer to make dough sponge.Operates/monitors /dough mixer through automated controls to make dough. Mechanically and manually removes dough from mixer into trough, transports trough to fermentation area for curing or returns risen dough to automatic conveyor for loading into mixer. Places additional ingredients into mixer hopper prior to adding the dough and completing the mixing cycle
Mechanically removes finished dough into dough trough and places it in staging area or in position for automatic elevator loading into the divider machine.Performs site cleanup as necessary.Open door and watch for “clean up” (dough mixed together) and monitor to add other ingredients until ready to “kick out” of mixer into trough
Ensure ingredients are accurately measured and added at the proper time to ensure dough is proper consistency.Set valves and meters on proper settings
Monitor to assure dough is proper consistency throughout mixing process.Keep work areas clean and free of accident hazards.Record data for runtime, cleanup for critical control points data charts.Take appropriate action to ensure the integrity and sustained certification of the SQF system.Responsible for reporting and taking any necessary action to prevent food safety and food quality problems from occurring. Position
High school diploma or GED preferred. Must be able to read, write, and speak English. Must be able to work any hours and holidays.
Must be able to work varied shifts. Must be able to push, pull, lift, carry, squat, twist, kneel, and reach. Must be able to lift up to 50 pounds.
Follow Personal Protective Equipment (PPE) guidelines- equipment required will include hair nets, ear plugs, safety glasses, safety shoes. Bimbo Bakeries USA is an equal opportunity employer with a policy that provides equal employment opportunity for applicants and employees regardless of race, color, religion, disability, gender, age, national origin, sexual orientation, gender identity, marital status, pregnancy, veteran status, or any other classification protected by law. This policy applies to all aspects of employment, including recruitment, hiring, promotion, compensation, reassignment, layoff, discharge, education, training and all other working conditions. To further the principle of equal employment opportunity, Bimbo Bakeries USA has developed affirmative action plans for minorities and women, qualified individuals with disabilities, and Vietnam-era and special disabled veterans and other protected veterans.
Metal Machine Operator - 1St Shift
To better balance the needs of your personal life, Wenger Corporation provides best-in-class, family-friendly scheduling for our manufacturing team. Our flexible options include four 10-hour shifts, three 12-hour shifts, and overtime Fridays. And when the unexpected does arise, we'll work with you to help you be where, and when, you are needed most.
The Metal Machine Operator in the Sound Module Fabrication Department is responsible to set up and operate machines while working under limited supervision within assigned areas in a manner, which meets or exceeds established quality and quantity standards.
Major Areas of Accountability Include:
Sets up, adjusts and operates with speed and accuracy a variety of metal fabrication equipment including but not limited to: press brake, punch press, tube benders, saws, wire forming machines and CNC cutting equipment
Follow engineering drawings and blueprints
Achieve high standard in regard to quality of parts
Determine materials required and follow sequence of tasks outlined on production orders
Exercise proper ability to determine correct inspections
Maintain equipment and environment to be clean and safe
Requirements of Position Include:
High School plus some college, vocational/technical school is desired
Ability to read and interpret engineering drawings and blueprints
Experience with tape measure, calipers, and other measuring instruments
Reading text and documents, numeracy, writing and oral communications within team environment
Problem solving, critical thinking, planning, prioritizing, and organizing
Ability to operate hand tools
Ability to stand for long periods of time
Light to moderate lifting
Wenger Corporation is an Equal Opportunity / Affirmative Action Employer
Hot Press Operator
This position is for Pactiv, a company of Reynolds Group Holding Inc. At Pactiv, continuous innovation and development has secured our place as one of the world's largest manufacturers and distributors of foodservice and food packaging products. Pactiv currently produces custom and stock foam, plastic, aluminum, pressed-paperboard, PE coated board, and molded-fiber packaging. Our global force of almost 12,000 team members allows us to supply packers, processors, supermarkets, restaurants, institutions and foodservice industries around the world. Over the years, Pactiv has consistently outpaced the competition in safety, innovation and strategic acquisitions. Want to learn more? Visit www.Pactiv.com.
Consistently and safely operates machines at or above standard levels of operation including waste, quality, efficiency and utilization.
Trouble shoot, identify and correct machine related problems through proper adjustments to various parts of the machine.
Provide innovative solutions for production issues.
Provides support and guidance to less experienced personnel.
Able to inspect and recognize defective product and make machine adjustments to correct cause of defects.
Observes all housekeeping, standard work and safety guidelines.
Mechanical aptitude, demonstrated problem solving skills and effective communication skills - written and verbal are required.
Pactiv is an Equal Opportunity Employer EEO AA M/F/Vet/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veterans status, or any other characteristics protected by law.
Compounder -Batch Mixer (3Rd Shift)
Summary: Is considered to be a trainee or have limited knowledge of the department.
Essential Duties and Responsibilities:
Include the following. Other duties as required and assigned by supervisors and Managers.
Quality Control/Quality Surveillance
Safety Procedures and Safety Awareness
Good Manufacturing Procedures and Housekeeping/Appearance Standards
Weighs and mixes materials
Aids in the receiving and sampling of bulk materials.
Operates work savers, dump dispensers, hand jacks and all other associated equipment
Hi-Lo and forklift certification required
Follows specific GMP regulations.
Responsible for equipment and work area cleanliness and equipment adjustments and replacements.
Heavy lifting period.
Competencies: To perform the job successfully, an individual should demonstrate the following competencies:
▪ The line personnel will perform all duties associated with the manufacturing, filing, and assembly requirements to deliver a final product.
▪ Must be able to visually inspect, detect, and correct any problems with the product
▪ Must be able to reach, pull, and lift product items.
▪ Must be able to cap small, medium, and large bottles.
▪ Must be able to perform your job function for a period of 2 hours at a time.
▪ Must be able to stand, sit, and walk without hindrance.
High school diploma or equivalent.
Meet company standards and testing for this position.
Meet company attendance requirement for any pertinent training classes or on the job training.
Meet or exceed physical demand and requirements for the position.
Able to reach, pull, and lift repeatedly 35 – 50 lbs. as demanded by the work station.
General, must be able to understand and perform quickly any instruction given by the supervisor related to the jobs performance. Individual must also be able to give instructions clearly and effectively.
Must have vision of at least 50/200 in both eyes and distinguish basic colors.
Must have adequate hearing.
Must have no musculosketal conditions that impede rotation, flexion, or extension of neck, back, and extremities.
Must not be on any narcotic drugs of any sort.
Must not be on anti-anxiety drugs or anti-depressant drugs without a note from a medical provider attesting that the medication will not interfere with the performance of the job.
Must be able to stand, sit and walk continuously for 8 hours.
Must have no medical impediment to perform light to heavy duty work.
Mixer / Compounder 2Nd Shift
The Compounder is responsible for manufacturing product batches according to formula procedures and operating processing equipment
Pay Rate: $13.00 hr -$15.00 hr based on experience
Shift: 2:00 p.m. - 10:30 p.m.
Location: North Austin, Howard Lane area
This is a full time position with the company!
ESSENTIAL DUTIES: Duties and responsibilities include the following. Other duties may be assigned as business demands.
- Wash, sanitize, and set up all necessary manufacturing equipment used in making of the chemical batches.
- Properly operate processing equipment (i.e., pumps, tanks, mixers, etc.)
- Adjust the speed of the mixer when necessary.
- Draw a sample of product and Take sample to lab to be tested.
- Initial batch sheets and sign tank cards to verify that the formulas/procedures were followed when compounding each product.
- Safely operate forklift to move pallets, drums, tanks around the department.
- Understand the full process of the Compounding Department.
- Work cooperatively with co-workers and supervisors.
- Other duties as assigned.
KNOWLEDGE AND SKILLS:
- Two years of work experience in a manufacturing environment preferred
- Two years of work experience in compounding
- Basic comfort with mechanical applications to become familiar with basic machine functions
- Ability to apply common sense understanding to carry out simple one or two step instructions
- Must read and follow written instructions and add and subtract simple fractions
- Ability to work in independently or in teams while maintaining a favorable working relationship with other company employees
- Regularly required to stand, stoop, kneel and/or crouch
- Capable to lift or move 50 lbs
- Occasionally required to climb or balance
- Ability to use hands to finger, handle or feel objects, tools or controls: reach with hands and arms; stoop, kneel, or crouch.
The work is performed in a warehouse environment. Workers are regularly exposed to dust, odors, noise and variable temperatures. The employee works with moving mechanical parts and machinery.
Medical / Dental / Vision and 401K available! PTO, 2 Floating Holidays AND 6 paid Holidays a year!
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!