Mixer Tender Board Job Description Sample
Load rolls of paper onto automatic splicing unit of web offset printing press or a Gravure press. Inspect rolls of paper for blemishes or tears and cuts away damaged area with knife.
Roll paper into loading position on automatic splicer, insert shaft of automatic splicer through roll core, secure holding chucks of automatic splicer to shaft ends, and thread paper through press components to prepare press for printing. Apply adhesive strip to backup roll and insert backup roll onto automatic splicing unit of press to prepare paper for automatic splicing. Remove roll of leftover paper from press after automatic splicing.
May operate mechanical truck to transport rolls of paper to press area. May assist with some of the make-ready tasks associated with the type of press operated such as hanging plates, examining plates, prepping and installing blankets, adjusting tension etc. May clean press and clean and install press components to maintain press in working order. May prepare and prepares and loads flat stock into a sheet fed press.
Requires general knowledge of offset presswork procedures and materials. Ability to read and follow job specifications to determine materials needed to run the job successfully.
Ability to make adjustments to auto splicer. Knowledge to load paper and prepare slice for continuous operation of the press. Knowledge of materials and requirements for press.
RRD is an EEO/AA including Vets and Disabled Employer
Press Assistant I - Roll Tender
Production opportunities at Quad instill a sense of empowerment and possibility distinct from those at other employers. Quad's state-of-the-art manufacturing facilities include world-class automation and printing technology. Our platform includes digital, gravure and offset presses that give our clients a full range of options to produce personalized marketing products. Fueled by innovative, interesting days, you'll find hard work is good work, and feel a deep sense of pride in a job well done – something shared by everyone in the community we call Quad.
Quad is currently seeking a Press Assistant I/Roll Tender to work in the Charlotte, NC Retail Plant. As a member of the press crew, the Press Assistant I (Roll Tender) has previous experience as a Press Asst. II (stacker/jogger) and is able to perform the duties of both positions and may be asked to do so from time to time. Primary responsibilities include but are not limited to:
Understanding standard operating procedures of the department
Manage the paper supply inventory on the press and feed rolls into the press
Coordinate plates and tickets for upcoming jobs and hang paper according to job tickets
Set up and make splices, bend and hang plates as well as hang blankets and assist with webbing up press
Ensure correct ink is available for job and check ink fountains regularly
Set fold during make-readies and check trim sheets to proof and complete necessary roll reports and paperwork accurately
Communicate effectively with plate room and paper warehouse and coordinate changing of ink, etch, and silicone totes as needed
Wash up the press and assist with preventative maintenance.
Candidates must have prior press experience as Press Assistant II (Jogger)
Strong mechanical abilities and knowledge of presses and roll stands and the ability to perform basic math calculations are essential.
Good verbal and written comprehension skills are a must.
Must be able to thrive in a team environment and work independently with minimal supervision.
This position also requires the ability to bend and lift 50 pounds continuously, ability to lift up to 90 pounds occasionally, stand long hours, use hands and wrists continuously and use vision in order to identify defects, performing repetitious tasks in a fast-paced atmosphere with or without a reasonable accommodation.
Additional Company Information
We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.
Quad/Graphics is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, military or veteran status, disability, genetic information or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories.
Drug Free Workplace
- Preference will be given to those who currently work for Smith & Wesson*
Oversee the manufacture of machines and equipment that apply treatments to metals and metal components. These treatments remove defects and can be finished to specific products, for example, artificial aging. The Heat Treat Operator will be working with a variety of metals such as iron and stainless steel.
Essential Duties and Responsibilities:
Loading the untreated product in an oven or a tank
Adjusting temperature controls for a particular treatment
Monitoring of the process, and adjusting times and temperatures according to the instructions
Removing the products from the oven and air drying, or air conditioning in water baths, oil or chemicals
Cleaning of oxides and scale of parts or sprinkler use steam-cleaning or chemical cleaning solutions
Sampling for testing hardness and other properties to ensure they meet manufacturer's specifications
Carrying out minor maintenance work
Testing parts for hardness, using hardness testing equipment, and stamps heat treatment identification mark on part, using hammer and punch
Removing parts from furnace after specified time and air dries or cools parts in water or oil brine or other baths
Reducing heat and allows parts to cool in furnace
Positioning part in fixture, pressing buttons to light burners and tending flame hardening machine, according to procedures, to case-harden metal part
Adjusting speed and operating continuous furnace through which parts are passed by means of reels and conveyors
Setting up and operating die-quenching machine to prevent parts from warping
Activating and tending electric furnace that anneals base sections of hardened parts for subsequent machining
Setting automatic controls, observing gauges, and operating gas or electric furnace used to harden temper, or anneal metal parts
Loading parts into containers, closing furnace door, and inserting parts into furnace when specified temperature is reached
Determining flame temperatures, current frequencies, heating cycles, and induction heating coils needed based on degree of hardness required and properties of stock to be treated
Reducing heat when processing is complete in order to allow parts to cool in furnaces or machinery
Moving controls to light gas burners and to adjust gas and water flow and flame temperature
Repairing, replacing, and maintaining furnace equipment as needed, using hand tools
Placing completed work pieces on tables, using cold rods, tongs, or chain hoists, or examining parts to ensure metal shades and colors conform to specifications, utilizing knowledge of metal heat-treating
Heating billets, bars, plates, rods, and other stock to specified temperatures prior to forging, rolling, or processing, using oil, gas, or electrical furnaces
Setting and adjusting speeds of reels and conveyors for prescribed time cycles in order to pass parts through continuous furnaces
NOTE: This list presents only the principal duties of the position and is not intended to be comprehensive. The duties and responsibilities listed above may be changed or supplemented at any time in accordance with business needs and conditions.
Education and Experience:
High School/GED, prior experience working in a manufacturing environment
Lean manufacturing experience is preferred.
Must have proven ability to safely operate various manufacturing production machines
Competencies and Skills:
Must be able to follow verbal and written multi-step directions for semi-complex machine operations
Ability to multitask and resolve problems quickly
Able to work effectively in a team environment
Visual acuity and depth perception is required
Must be able to communicate in English verbally and in writing (basic verbal instructions, simple written memos and instructions)
Basic computer skills preferred
Must be able to sit, stand, walk, climb, bend, stoop, push, pull, carry, reach, twist
Must be able to lift up to 50 pounds
NOTE: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Work Environment and Personal Protective Equipment:
Within the Smith & Wesson manufacturing facility, employees may be exposed to manufacturing noise, airborne liquid chemicals, fine particulate dust, ambient temperatures, and industrial lighting. Work environment is similar to most manufacturing operations. May be exposed to excessive noise, temperatures, hazards associated with working around moving machinery, work in confined quarters, exposure to vibrations and shop lighting, continuous exposure to hot temperatures, may be humid, odors, dust, continuous exposure to mechanical hazards, and occasional exposure to chemical hazards.
The following Personal Protective Equipment is required:
- Safety glasses with side shields and hearing protection required when on manufacturing floor
The use of additional personal protective equipment (PPE) may be required when a job task(s) is being completed in or around your assigned department or in another department, this includes safety eyewear, hearing protection, and safety footwear.
Strand Tender (4850)
Founded in 1915, we started with a single recycling location and have grown into a global enterprise, and one of the largest metal recyclers and steel manufacturers in the United States. Our vertical integration model was the first of its kind and revolutionized the way the steel industry operates today.
We are also a Fortune 1000, global company that is committed to delivering industry-leading customer service, providing a safe and healthy environment where our employees can succeed, creating value for our investors and improving our communities.
We are sensitive to the impact our industry has on the environment, which is why we are committed to a process that minimizes our carbon footprint and preserves our natural resources for future generations. Our recycling facilities collect metals from the community and convert them into steel that supports our infrastructure.
Return to List | Apply Now
Strand Tender (4850)
Location:Birmingham, AL (0212) Relocation Assistance:No
To safely start, stop
Mixer - Aerosol (2Nd Shift)
WELCOME TO SHERWIN-WILLIAMS
Sherwin-Williams is the largest paints and coatings company in the world. With $15.8 billion in sales, more than 4,100 stores, and 140 manufacturing and distribution centers worldwide.
Our 60,000 employees across the globe are diverse, innovative and passionate. With a variety of rewarding and challenging opportunities, Sherwin-Williams is a great place to launch and grow a career. Find yours and join us today.
Under the supervision of the Production Supervisor, this position is responsible for being able to complete all tasks associated with producing paint according to work standards. Along with the other team members in the production, this employee has the general responsibility of contributing to site and company goals.
Major tasks include:
Retrieve and read the production schedules to determine which batches need to be produced during the shift.
Perform all start up, shut down, change over and prebatching procedures as stated in the standard operating procedures (SOPs).
Transfer liquids via pumps and able to read meters. Open and dump bags of raw materials into appropriate mixing tanks.
Read the formula in order to add correct ingredients and combine ingredients in correct sequence.
Perform continuous quality inspection of product while documenting appropriate quality checks.
Work with QA technician to identify appropriate batch "hits" for color. Distinguish color and texture by seeing and feeling
Communicate effectively with packaging technicians to know when and where to pump paint, operator pumps correctly to ensure smooth flow of product.
Perform bulk materials unloading operations
Perform basic troubleshooting techniques must have the mechanical aptitude to understand proper machine setup and adjustments for safety and quality purposes and to respond to malfunctions.
Handle hazardous waste as part of manufacturing operations, maintenance, raw material handling, and clean up activities, in order to protect personnel, property and the environment.
Responsible for performing operator PMs as scheduled or instructed.
Ensure HKE standards are maintained by keeping work area clean and conducting a final cleaning near the end of each shift. Other housekeeping duties as assigned.
Ensure all safety and company rules are being followed; including, but not limited to; wearing appropriate personal protective equipment, LockOut/TagOut Policy, Cardinal Rules, smoking policy, lifting procedure, machine guarding, etc.
Understand and participate in achieving site and shift goals. Participate in activities outside functional job responsibilities (site projects, committees, etc.). May serve as Spill Responder or Emergency Responder.
Utilize basic math and reading skills
Wear a respirator as needed for the transfer of raw materials and processing of batches, and work on an elevated platform.
Must be able to read, write, comprehend and communicate in English
Must have the legal right to work in the country of employment without needing sponsorship now or in the future for employment visa status
Must be at least 18 years of age
Must have access to reliable transportation
Must be able to work overtime with or without reasonable accommodation
Able to push, pull, carry or lift 50-100lbs frequently with or without reasonable accommodation.
The successful candidate must also pass a pre-employment background check, physical and drug screen.
One year of experience working with machinery in a manufacturing environment
Experience monitoring the quality of raw materials or finished goods
Experience blending and making a product in a batch process
Who we are -
At Sherwin-Williams, we're proud of the company we keep — our family of loyal employees. To learn about our company and our culture go to Sherwin.com/careers.
Equal Opportunity Employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, citizenship status, marital status or any other consideration prohibited by law or contract.
VEVRAA Federal Contractor requesting priority referral of protected veterans.
Please note: Employees internal to site are given priority.
Shift/Schedule: 2nd Shift Monday
Pay Rate/Shift Premium: $22.58 / .30
Mixer (Day Or Night) - Sabetha, KS S
For more than a century, the people of Archer Daniels Midland Company (NYSE: ADM) have transformed crops into products that serve the vital needs of a growing world. Today, we're one of the world's largest agricultural processors and food ingredient providers, with approximately 31,000 employees serving customers in more than 170 countries. With a global value chain that includes approximately 500 crop procurement locations, 270 ingredient manufacturing facilities, 44 innovation centers and the world's premier crop transportation network, we connect the harvest to the home, making products for food, animal feed, industrial and energy uses. Learn more at www.adm.com.
ADM Animal Nutrition, a division of Archer Daniels Midland Company, is a leading manufacturing, nutrition, and marketing business offering a wide range of innovative products for the animal nutrition market.
Mixer (day or night) - Sabetha, Kansas S
ADM Animal Nutrition
This is an hourly position.
The role of the Mixer is responsible for the following duties:
Identify and communicate food safety and/or product integrity issues to appropriate personnel.
Perform duties as assigned by Production Supervisor and/or other management personnel.
Follow and review all standard operating procedures and recommend revisions for improvements.
Insure all quality specifications associated with products are met.
Prepare reports of production, safety incidents, etc. for review by Plant Manager and Operations Manager.
Participate in safety meetings, comply with all safety/security policies, and report (and stop) any unsafe conditions or acts to Plant Manager and/or other management personnel.
Follow procedures dictated by Floor Traveler for each product.
Instruct subordinate staff and/or temporary employees on job specific tasks.
Other responsibilities as assigned by management.
Promotes the ADM Way and Core Values.
Strong attention to detail with the ability to work effectively as a team member
Exceptional attendance and work ethic
Exhibit flexibility, reliability and a mutual respect for fellow employees
Strong safety and math aptitude
Ability to stand for long periods of time, lift up to 50 lbs. to a height of 48 inches on a routine basis
Ability to withstand dust and noise
Relocation assistance is not available with this position.
This position offers a complete benefit package, including 401K/ESOP, pension, health, dental, vision, and life insurance.
ADM requires the successful completion of a pre-employment physical, drug screen, and background check.
The color of pride: Benjamin Moore is proud to be a part of Berkshire Hathaway, which was recognized by Fortune magazine as the world's third most admired company. And for more than 130 years we've been a respected leader in the architectural coatings and home décor landscape; creating the products and tools that enrich and beautify thousands of communities each day. We recognize that our associates are the driving force behind our success and we strive to provide a work environment where hard work, creativity and purposeful collaboration are fostered and encouraged.
Join a company where innovation is constantly recognized as we look for individuals who produce world-class products, best-in-class services and customer experiences, design pioneering paints using the latest technologies and deliver unparalleled value and brand experiences for our customers and retail network.
Follows all safety guidelines and rules; environmental and regulatory guidelines; uses all required safety equipment.
Maintains quality and cleanliness of the work area and equipment.
Follows batch formulation, as prescribed by Central Labs, and uses knowledge and skills to incorporate approved materials for proper dispersion. Approved materials may be accurately and efficiently added to dispersion task by uses of electronic gauges, valves, temperature controls, flow meters or other related equipment.
Mixes the materials and performs quality controls checks for dispersion approval and transfer to the next step within the production process, using prescribed equipment. May use electronic information systems to control materials additions, check material inventory supplies, etc.
Ensures all batches are properly and expeditiously transferred into scheduled tanks for thin-down. Batches are completed in accordance with Central Lab formulations. Batches are completed in accordance with Central Lab formulations, using the prescribed approved raw materials, thickeners, thinners, etc. Materials are accurately measured and delivered to assigned holding tanks, using electronic gauges, valves, transfer equipment, etc. May use electronic information systems to control materials additions to complete batches for final approval.
Communications with other departments for proper transfer of completed dispersion production process; milling, shading, etc. to assigned holding tanks.
May be required to maintain efficiency of material additions/flow by checking and changing filters.
Maintains forklift or other related equipment by checking battery, electrical charger hook-up etc.
Performs other duties as required.
High school diploma or equivalent required.
Ability to work in a team environment and the willingness to be cross-functional.
Excellent attention to detail.
Basic math skills, i.e. addition/subtraction.
Ability to work safely and follow SOP's.
Good interpersonal communication skills.
Ability to use company software and computer system.
Ability to operate a forklift preferred.
Ability to lift 50 pounds continuously throughout shift.
Production Mixer On 1St Shift ( Mon To Thu 4:00 Am To 2:30 Pm)
To properly perform any mixing job by mixing acceptable product, while ensuring a proper production flow, especially from mixing to the production lines.
- Understand how to properly set up, operate and wash down a mixer.
- To use FIFO ( First in, First out) method correctly.
- To properly place ingredients into containers.
- Must be able to fill out corresponding paper work for each product mixed.
- Must be able to complete all JDE transactions.
- Scale ingredients needed.
- To maintain a clean, safe and sanitary work area.
- Participate in the yearly audit and assist in the development of procedures and corrective actions
- Must adhere to the plant’s policies and plans
- Must follow all Good Manufacturing Practices (GMP’s)
- Prior Mixing Experience
- Food manufacturing experience is preferred
- Must be able to perform basic mathematical skills.
- Must be able to read, write and comprehend basic instructions and processes of the job.
- Must possess good interpersonal skills including the ability to work well with others
- Ability to promote teamwork
- Must be willing and able to cross-train
- Must be able to operate manual pallet jacks in a safe manner
- Must be able to operate elevator properly & safely
Il Team Gare Pubbliche – Area Amministrativa - si occupa della partecipazione alle gare broker indette dalle pubbliche amministrazioni, quali a titolo di esempio, strutture sanitarie, multi-ulities, enti di stato, enti locali, etc.
Per la sede di Milano, stiamo selezionando un Tender Specialist.
La risorsa selezionata deve aver maturato una breve esperienza in attività affine, svolta principalmente presso Uffici Gare di società operanti nel settore dei servizi.
Il/La candidato/a si occuperà dell'individuazione, della ricerca e del monitoraggio dei bandi di gara e delle offerte sul mercato, dell'analisi dei requisiti per la valutazione della fattibilità e della verifica di idoneità; gestirà la redazione degli atti e della documentazione richiesti dalla procedura di gara, dalla fase introduttiva fino a quella conclusiva, il monitoraggio e il rispetto delle scadenze previste.
Tra le attività previste dal ruolo prevedono inoltre:
Analisi dei documenti di gara;
Predisposizione della documentazione amministrativa propedeutica alla partecipazione alle gare broker;
Supporto all'ufficio legale esterno in occasione di contenziosi derivanti dalla partecipazione alle gare broker.
Laurea in Giurisprudenza;
Esperienza di almeno 3 anni maturata in posizione analoga;
Buona conoscenza della lingua inglese;
Ottimo utilizzo di Microsoft Office;
Proattività, ambizione, passione per il settore, problem solving e spiccate competenze comunicative e relazionali completano il profilo.
Office Location: Milano
Marsh & McLennan Companies and its Affiliates are EOE Minority/Female/Disability/Vet/Sexual Orientation/Gender Identity employers.
Mixer Driver - Pelican Point, UT (Saratoga Springs)
POSITION: Concrete Mixer Driver
LOCATION: Pelican Point, Utah (Saratoga Springs)
POSTING CLOSES: March 4, 2019
POSITION SUMMARY: Assume responsibility for the proper operation and maintenance of company mixer.
Deliver concrete to each job within the specification as instructed on the delivery ticket.
Change flat tires, keep the mixer clean, and use of reclaimer and washout facilities.
Maintain a commercial driver's license (CDL) and Department of Transportation (DOT) Medical Card.
One year of mixer driving experience or equivalent with a good safety record.
Attention and commitment to safety.
Ability to work well with others in a team environment.
Ability to follow instructions and work long hours.
Able to lift at least 65 pounds and knowledge of DOT compliance.
Apply on-line at genevarock.com/careers/ and include a RESUME with application.
The successful candidate must be safety conscious with a record of working safely in the workplace.
- Current employees are required to speak with their immediate manager before applying for any open positions.
Geneva Rock Products, Inc. is an "Equal Employment Opportunity/Affirmative Action/PWDNET" Employer
This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!