Numerical Control Drill Operator Printed Circuit Boards Job Description Sample
Contract Avionics Hardware Printed Circuit Board Designer
• Develop and maintain board eCAD design libraries, including part footprints and related information.
• Contribute to PCB/PCBA design reviews by providing DFM/DFA/DFT and similar value added info.
• Contribute to determining feasibility of project goals and objectives related to PCB development.
• Collaborate in defining PCB development process improvements (procedures and checklists).
• Collaborate with PCB design tool assessment and automation.
• Demonstrate a sense of urgency, commitment, and focus on the right priorities in each PCB design.
• Independently determine general approach and provide reliable solutions to technical problems including working through complex issues related to PCB layouts and assemblies.
- Technical diploma or certification.
- A minimum of 5 years of experience as a PCB designer.
- 10,000 hours of experience as a PCB designer on Altium Designer.
- Demonstrated knowledge and use of PCB “best practices” for both design and manufacturing.
- Knowledge of IPC PCB fabrication and electronic assembly standards (e.g. IPC-7351B, IPC-2221B).
- Track record of successful board design product releases demonstrating mastery of:
- High-speed, impedance controlled stack-up, multi-layer board layout design.
- DDR4 routing with XSignals
- Fine pitch BGA routing, including blind – buried vias.
- Complex analog and digital signal routing.
- Multi-rail power delivery and high-speed signal integrity constraints.
- Design constraint management; including trace length matching, spacing rules, etc.
- Ability to create and maintain symbol / footprint libraries.
- Excellent attention to detail and strong task ownership, someone who demonstrates pride in all work.
- Must be a U.S. citizen or permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum
• Demonstrated proficiency (2,000+ hours) with Cadence OrCAD.
• Experience with board design related to safety critical hardware systems compliant with DO-254.
• Experience working with PCB/PCBA manufacturing vendors.
• High reliability board design experience; including compliance with DFM, DFA & DFT requirements.
• Familiarity with Windchill, or related tool, product design management and support.
• Familiarity with Cadence and Altium schematic capture tools / processes to support board development efforts.
Sr. Commodity Manager- Printed Circuit Boards
Senior Global Commodity Mgr. - Printed Circuit Boards. This position will lead the strategy creation and execution for the PCB commodity at Juniper
Collaborate with the Juniper PCB experts to define and develop a global sourcing strategy
Lead the Juniper Global Commodity Team to identify PCB technology and business issues amongst Juniper development groups, product marketing managers and the industry.
Represent Juniper's needs to the industry and drive strategic partnerships to enable aligned investments
Identify sourcing opportunities and negotiate world class pricing and terms
Lead supplier development and commercial contract negotiations
Manage risks in corporate strategy, supplier financials, corporate compliance, and operations
Drive the implementation of commodity strategy with internal stakeholders
Possess understanding of PCB commodity industry indicators and market intelligence
Lead coordinated executive negotiation to achieve cost reductions.
Define cost drivers, develop cost models and establish should cost
Align suppliers and Juniper technology roadmaps through understanding of market trends, Juniper future requirements, and suppliers' technology value proposition
Develop suppliers to enable innovative products/solutions to align with Juniper roadmap
Select supply base and develop targeted preferred supplier list, AVL mgmt
The candidate must possess technical PCB knowledge, business acumen and excel in interpersonal communication, teamwork, conflict resolution and relationship management skills.
Minimum BS (PCB, Material Science, Electrical Engineering and/or Mechanical Engineering) with combined 10 years of Engineering and Manufacturing Experience.
Direct Experience in PCB commodity mgmt. or PCB industry experience
Possesses strong knowledge of network systems and solutions, manufacturing processes and procedures, the overall PCB product and manufacturing process, and the sub-tier PCB component supply base
Demonstrated strong leadership and influencing skills
Demonstrated experience and exposure with CEM, ODM and JDM Mfg. models
- Preferred MS in Engineering and/or MBA with 10+ years of PCB Global Commodity Management, Manufacturing or Management experience in a telecom/networking
- Travel requirements for the position 15-20%
Electrical Engineer Printed Circuit Board
Campus/Location:University Park CampusDate Announced:06/28/2018Date Closing:open until filled
Job Number:80115Level/Salary Band:
- 02 – M – Exempt
- 03 – N – Exempt
Work Unit: Applied Research LaboratoryDepartment:System DesignFull/Part Time:Full–Time
The Undersea Systems Office (USO) of the Applied Research Laboratory (ARL) at Penn State is seeking an Electrical Engineer, with a specialty in PCB Design. This individual will create Printed Circuit Board (PCB) layout designs using Altium Designer.
Designs will range from high speed digital to analog to power. Responsibilities include: evaluating relevant design requirements for product realization; working with electrical circuit designers; performing analysis as required to confirm design compliance; supporting other analysis functions ie: structural and thermal as required to establish PCB design compliance; write PCB test plans and procedures. This job will be filled as a level 2, or level 3, depending upon the successful candidate's competencies, education, and experience.
Typically requires a Bachelor's degree or higher in an Engineering or Science discipline or higher plus two years of related experience, or an equivalent combination of education and experience for a level 2. Additional experience and/or education and competencies are required for higher level jobs. A Bachelor's degree in Electrical Engineering is preferred.
IPC Designer certification highly desired. Preferred experience includes: proficiency with the Team Center and NX; prior experience with electronics bench testing, assembly, test equipment, firmware/software Familiarity with version control beneficial. Experience with the following is required: capable of generating complete drawings set to document PCB; fabrication drawings, assembly drawings, Bills of Materials (BOM's). Communication skills, including ability to collaborate with team members within and outside department required.
Candidates will be subject to a government security investigation. You must be a U.S. citizen to apply. Employment with the Applied Research Laboratory will require successful completion of a pre-employment drug screen. These are one year, fixed-term renewable appointments.
Assembler - Printed Circuit Boards
Job Title: Assembler
Job Location: Malabar, FL
Job Code: ES20181909-27466
Under general supervision, responsible for performing a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies. Able to identify problems and issues in straightforward situations resulting in resolving in most issues.
Intermediate comprehension and interpretation of a variety of technical specifications, including IPC knowledge, terms, and documents. Ability to complete less structured assignments determining and/or following methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units. Makes setups and adjustments holding tolerances to blueprint specifications and work authorization documentation. Fully participate/engage in team meetings with a positive attitude.
High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience.
Ability to work under a low power microscope.
Ability to lift items up to 45 pounds
Prior experience utilizing common hand tools including but not limited to screw drivers, torque wrenches, soldering equipment and epoxy dispensing tools.
Experience soldering printed circuit boards
- IPC 620 Certification
Please be aware that many of our positions require a security clearance, or the ability to obtain one. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that Harris Corporation may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
Harris is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or membership in any other group protected by federal, state or local law.
Candidates will support Environment, Health and Safety by fulfilling the Harris EHS Policy, complying with Harris EHS programs and applicable regulations, and striving for continual EHS improvement.
Location: USA - FL - Malabar
Activation Date: Wednesday, September 19, 2018
Expiration Date: Saturday, September 21, 2019
Numerical Control Programmer 3
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems in air and space that impact people's lives around the world today, and for generations to come. Our work preserves freedom and democracy, and advances human discovery and our understanding of the universe. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have a lot of fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.
Northrop Grumman Aerospace Systems has an opening for a Numerical Control Programmer 3 to join our team of qualified, diverse individuals. This position will be located in El Segundo, CA.
The selected candidate will develop and implement software integration plans in a lab environment supporting various aircraft systems.
Develops and writes programs for numerically controlled machines using engineering specifications and drawings.
Analyzes engineering drawings to define configuration of parts and determine type and sequence of machine operations.
Develops programs for machining parts, tools, or sheet metal on numerically controlled machine tools.
Makes proper cutter selections for each part, taking into consideration such factors as speeds, types of cutters, feeds, and control system limitations.
Selects program routines for the most efficient computer calculation of dimensional and machining requirements for each part.
Tests and modifies existing parts programs for engineering changes or program improvements.
The selected candidate should thrive in a fast-paced work environment with high expectations, significantly diverse assignments, collaborative/team settings across all levels. Candidate must be comfortable in a lab environment and be able to collaborate closely with system engineers, hardware designers, and integration/test engineers.
Bachelor's Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline with 5 years of software engineering experience OR A Masters with 3 of experience
Understanding and wide application of technical principle, theories, and concepts of computer aided manufacturing
An active in scope DoD Secret Clearance
Previous Aerospace/Defense Industry experience
Tooling and engineering modeling understanding
Product assurance programming (PAP) languages, AutoCAD, CATIA, PC DMIS
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO. U.S. Citizenship is required for most positions.
Printed Circuit Board (Pcb) Designer
The PCB Designer will be responsible for producing PCB fabrication and assembly designs and design documentation for automotive, HVOR, and industrial sensors.
- The PCB Designer (Designer) will be responsible for PCB fabrication and PCB assembly design and related documentation, including ECAD project file data management, ECO processing, BOM support, and documentation control activity in support of sustaining engineering, derivative design, and new product design of various sensor products.
The Designer will primarily interface with internal Design Engineering customers and design peers, as well as drafters, Bill-of-Material specialists, and Document Control. The Designer will be expected to transform Design Engineering inputs into detailed design models and drawings while applying standards and best practices of industry (ex. IPC, ASME Y14 series), business unit, supplier, and department. Expertise will be demonstrated in core department competencies: design, CAD, drafting, document control (ECO, PDM, PLM), and product configuration management (BOM).
The Designer will work in a fast-paced, dynamic environment where attention to detail will be required.
Design PCBs using flexible, rigid, and ceramic PCB substrates
Create and maintain ECAD design models, drawings, and engineering specifications in accordance with relevant standards
Support peers via design sharing and ECAD/MCAD exchange via robust PDM of data sets
Process Engineering Change Orders (ECO) per quality and delivery expectations
Multi-task and work with engineers and designers to manage priorities
Document schematics with inputs from Electrical Engineering team
Support ECAD component library setup requests and maintenance
Bachelor's Degree in an electrical or mechanical engineering discipline, or equivalent experience
Two or more years professional experience and proven proficiency in PCB design and ECAD tool(s) with respect to schematic, layout, and library
Mentor Graphics experience strongly preferred
Ability to manage multiple projects and tasks in a fast-paced, rapid change product design and development environment
Strong collaborative attitude and proven teamwork track record
General understanding of product configuration management and PCB Bill-of-Material methods
Strong oral and written communication and collaboration skills
Strong organization and documentation skills
PCB data management
Knowledge of PCB/PCBA manufacture process and supply chain a plus
Experience in automotive electronics a plus
Some travel required
Our employees are the reason we have been successful in the past and the reason we will be successful in the future. Employees' skills, talents and work ethic have defined the business and will shape our collective future.
Our Vision is to be:
A world leader and early innovator in mission-critical sensors and electrical protection
Satisfying the world's growing need for safety, energy efficiency and a clean environment
A partner, employer, and neighbor of choice
NOTE: If you are a current Sensata employee (or one of our Affiliates), please back out of this application and log into Workday via the Company Intranet to apply directly. Type FIND JOBS in the Workday search bar.
NC Drill Operator -Swing Shift (3:30 Pm - Midnight) - (34608)
NC Drill Operator
Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market.
Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.
The primary function of this position will be performing mechanical drilling on printed circuit boards.
Nature of Duties/Responsibilities
The qualified individual will work with mechanical drill equipment. In addition, the employee will be required to inspect own work for quality and accuracy.
Education and Experience
Minimum 2 years printed circuit board mechanical drill experience including controlled depth drill and back drill. (Will consider training for less experienced candidates.)
Must understand process travelers, customer specifications and tolerances specified on travelers or blueprints.
Familiar with printed circuit board Excellon drilling equipment.
Must be available to work overtime and weekends.
Must have good verbal and written communication skills.
This is an ITAR facility and applicant must be a US Citizen or a lawful permanent resident.
EEO Employer Vets/Disabled
Printed Circuit Board Assembler/Solderer
Electronic Assembler will perform upper level hand assembly and have experience doing through-hole, surface mount and jumper wire soldering as well as IPC-610 Inspection/touch-up. Experience painting small parts and/or screen printing type processes helpful.
DUTIES & RESPONSIBILITIES:
Work will include but not limited to: assembly, soldering, inspection, packaging, process improvements and training as well as other related activities.
Ability to perform SMT and/or PTH soldering of Printed Circuit Boards. Experienced in SMT and PTH rework and touch-up of PCB. Need skills in component bond, component assembly and hardware assembly.
Ability to operate machinery utilized in the PCB area such as the Wave solderer, CS-400, pinning machine and solder fountain.
Ability to perform duties of the conformal coat processes.
Ability to perform duties in module cleaning, potting and testing.
Ability to learn the use of bench top equipment, test equipment, hands tools and computers.
Participate in meetings to determine work priorities.
Commitment to customer and business focus in areas such as quality of work, attendance and productivity. Overtime may be required.
Adherence to company policies such as safety, respect for others, integrity and workplace rules.
Willingness to attend additional training, either OJT or off-site training recommended by the management staff to further personal development.
Numerical Control Pgmr 3
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems in air and space that impact people's lives around the world today, and for generations to come. Our work preserves freedom and democracy, and advances human discovery and our understanding of the universe.
We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have a lot of fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.
Develops and writes programs for numerically controlled machines using engineering specifications and drawings. Analyzes engineering drawings to define configuration of parts and determine type and sequence of machine operations.
Develops programs for machining parts, tools, or sheet metal on numerically controlled machine tools. Makes proper cutter selections for each part, taking into consideration such factors as speeds, types of cutters, feeds, and control system limitations. Selects program routines for the most efficient computer calculation of dimensional and machining requirements for each part.
Tests and modifies existing parts programs for engineering changes or program improvements. Develop and maintain NC Programming training modules and demonstrate NC programming best practices.
A Bachelors Degree and 5 years of numerical control programing experience or in lieu of a minimum of 9 years of numerical control programming experience with a High School Diploma/GED
Knowledge of material and process parameters including feeds and speeds
An active DoD Secret Clearance established or reviewed within the last 6 years is required.
Ability to perform material removal rate and other automated manufacturing calculations.
Ability to select and optimize cutter types for various machining processes. Numerical Control Programming experience using NX CAM environment.
Experience with virtual simulation, Vericut, Process Simulate, Cenit
Experience programming both conventional and multiple axis configurations typically gantry and / or robotic varieties.
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.
For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO. U.S. Citizenship is required for most positions.
Production Operator Drill (Swing)
Duties and Responsibilities:
Adherence to production time sensitive disciplines.
Set and maintain processing equipment within operational parameters.
Meet or exceed expected output targets and metrics.
Read blueprints and comprehend the English instruction documents and engineering notes to take individual/specific action to produce precisely designed products.
Strict compliance to all safety and quality guidelines.
Follow dispatch as required while making allowances for schedule changes in response to Hot Orders and customer requirements.
Work closely with others in a Team environment.
Demonstrate a strong, customer-focused culture
Operate with a true sense of urgency.
Exact adherence to process requirements.
Applicants must have a minimum of 2 years' experience in process manufacturing.
Experience and understanding of Lean Principles strongly preferred.
Experience and understanding of continuous improvement strongly preferred.
Printed circuit board manufacturing experience strongly preferred.
Experience in CNC and/or mechanical drill is strongly preferred.
Knowledge and experience in the use of circuit board terminology.
Knowledge and experience in the use of CNC machinery, measurement and inspection tools to include magnification, scopes, eye loops, calipers, gauges, etc.).
Strong understanding and demonstrated comprehension of written instructions in English including customer standards, blueprints, and shop control documents.
Ability to read, write and communicate in English to the degree necessary to perform the job
Ability to perform detailed work
Ability to perform basic arithmetic
Ability to lift 30 pounds without straining
Ability to stand throughout shift
Education and Experience:
High School Diploma or equivalent preferred
Two years experience in the printed circuit board industry preferred
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!