Numerical Control Router Operator Job Description Sample
Multiple Axis Numerical Control Routing Machine Operator
Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Router operators in this position set-up, adjust and operate a six axis Numerically Controlled (NC) Router, to drill holes and cut periphery of flat sheet compound detail parts.
Job Responsibilities include:
Employment in this position also requires bending at the waist, carrying 10-35 pounds, crouching, finger manipulation, lifting less than 10 pounds, pushing/pulling less than 10 pounds, rotation of head/neck, sitting, standing, walking, contact with metals, lubricants, exposure to noise, nonionizing radiation, vibration, energized sources and atmospheric conditions, and the use of personal safety gear for face/eye, hand/arm, ears and feet.
Prepare to set-up job (e.g. production orders, first lots, tape tryouts) by reviewing hot list, work order, tie-in sheets, operator's or setup documents and drawings.
Ensure that the correct work order, drawings, operator documents, and part(s) are at the machine for the material to be worked.
Ensure that the tools or fixtures are free from visible defects.
Move material/parts and fixtures by using overhead crane, electric stacker and pallet jacks, as required.
Check machine set-up and/or parts completed by previous operator to determine progress on a job, as required, and ensure safe working conditions.
Select machine accessories (e.g., fixtures, pins, chucks, collar, probes).
Verify that machine is in good condition. Identify fixtures, or templates to be used.
Locate part on Numerically Controlled Manufacturer Fixture (NCMF), and/or on vacuum fixture, using index pins, or hold down pins/clamps, as required.
Turn on vacuum line, and remove hold down pins as required.
Retrieve and download Numerical Control (NC) programs to machine controller using computing equipment and downloading from various servers/data bases.
Select and check cutters/drills per program or NC documents.
Ensure cutters/drills are the correct type, length, diameter, and are sharp and in good condition.
Replace worn, chipped, and defective tools, check/adjust overall tool length by using a height gauge and hand tools, as required.
Load and unload tools, following program information and set-up documents, using hand tools (e.g., wrenches, mallets, spanners) into Automatic Tool Changer (ATC), using appropriate safety equipment, as required.
Set machine coordinates or index points per NC documents including cutter offset/compensations, tool heights, and probes, using controller keyboard, as required.
Run CNC programs following CNC documents and/or program.
Operate the machine to cut/drill holes (e.g., pilot holes, rough/detail, periphery cuts), in various compound contour aluminum parts (e.g., dome web, leading edge, raked wing tip), as required.
Monitor machine settings (e.g., machine speed, feed rate) and adjust as necessary to correct machining problems or to prepare for next operation in sequence.
Perform minor editing of programs per shop requirements, as required.
Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter/drill path, clearance, chips, to ensure smooth operation.
Check work after completion of each operation in job and/or completed job to ensure part features are complete per drawing, specification documents, or sketches and that there are no defects.
Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
Perform Statistical Process Control (SPC) functions, as required.
Sell in process or finished work to inspector, as required by W/O or shop policy.
Handle and dispose of hazardous materials (e.g., solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment as required.
Relocation Assistance Available
No. Relocation assistance is not a negotiable benefit.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP. This is an hourly position governed by the IAM Collective Bargaining agreement. High school graduate or GED preferred.
This position must meet Export Control compliance requirements, therefore a United States Person as defined by 22 C.F.R. §120.15? "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.
Experience using precision measuring tools.
Experience as a machine operator, writing and editing CNC programs.
Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications.
Experience reading and interpreting assembly instructions or drawings.
At least 1 year of experience operating 3, 4, or 5 axis NC/CNC machine tools.
Able to work with and around hazardous materials (while using the proper protective equipment).
Training from a CORE PLUS program within manufacturing.
Training from a Community and Technical College program within manufacturing.
Contingent Upon Program Award
1018 Numerical Control Machine Operator 10-4710
1.Setup and operate one or more Monarch VMC-150, Johnford or Makino vertical machining centers.
2.Complete working knowledge of computer numerical controlled machines, their operation and production methods. (Offset adjustment, minor editing functions, tool setting, insert nomenclature, tape checks).
3.Operation of the distributed numerical control system (DNC).
4.General knowledge of common materials and their machining characteristics.
5.Understand and apply required measuring devices and gaging to determine part dimensional and finish conditions.
6.Understanding of cutting tools with ability to determine discrepancies and needs for adjustment and/or replacement.
Minimum of one (3) years vertical and/or horizontal machining center experience to +/- .0005" tolerances.
1.Read and interpret blueprints, routers, machine tool setup sheets, machining charts. Organizational skills permitting operator to comply with FMC Technologies & ISO requirements.
2.Understanding of NC Programming to the extent that minor edits can be made to feeds, speeds and coolant conditions.
3.Ability and desire to interface with others to resolve problems and/or improve operation productivity and quality. Work and communicate in a multiple shift operation.
4.Light to heavy lifting.
5.Ability to spend 70 to 90 percent of attendance standing and/or walking.
6.Ability to understand inherent machine tendencies, identify minor/major machine trouble, and correct minor machine problems as necessary.
Numerical Control Programmer
Job Description: :
Will provide Numerical Control programming support utilizing Catia V5 and CGTech Vericut V8 software as required.
Will perform task with a thorough understanding of the numerical controlled programming process and associated technologies of post processors and machine tool controls.
Will provide NC programming support for the machining of metallic and non metallic materials, ply cutting and laser assisted lay-up.
A combination of education and experience may be considered equivalent to the degree requirement.
Case by case evaluation must occur.
MUST BE A US CITIZEN - This position is located in a facility that requires special access.
Experience with machine theories/concepts, machine languages (G&M code programming).
Experience interpreting engineering drawing and blueprints.
Machine shop experience in set-up and running CNC machines.
Catia V5, CGTech Vericut and ICAM.
Microsoft Office Suite: Power Point, Excel and Word.
Experience with the machining of metallic and non metallic materials.
Experience with the machining of hard metallic materials.
Experience with the machining of composite materials.
Experience with the (Fibersim) ply cutting and laser assisted lay-up.
As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Join us at Lockheed Martin, where we're engineering a better tomorrow.
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
Job Location(s): Palmdale California
Security Clearance :
Business Unit :
ESS0343 AERONAUTICS COMPANY
Job Class :
Job Category :
Relocation Available :
Work Schedule :
FLEX9x80A-Friday off in 2nd week w/flex hrs/day
Req Type :
Additional Posting Locations :
Numerical Control Programmer
Job Title: Numerical Control Programmer
Location: St. Louis, MO
Duration: Long term 24+ months
Pay Rate: $60/ hour
To define, plan, design and refine fixtures, data and processes necessary to facilitate and control the manufacture of products in the St. Louis facilities.
Plans, creates, verifies and revises machine control data and documentation that direct the operation for multi-axis numerically controlled machines and robots required to manufacture and inspect complex parts and tools.
Provides numerical control, machining and programming technical expertise to cross-functional engineering and manufacturing team.
Establishes technical requirements for manufacturing and producibility.
Defines and designs complex fixtures used to manufacture or inspect parts.
Plans, guides and facilitates the development and integration of new machining techniques and manufacturing methods or inspection techniques, processes and software.
Continuously improves the quality of manufacturing processes and supplier-provided work
Experience and Qualifications:
Over four (4) years of recent N/C Programming experience, using CAD/CAM systems to analyze and modify part models and produce programs required.
Aerospace manufacturing experience required.
3, 4, and 5-axis NC programming for milling parts.
Structure parts (e.g. spars, ribs, skins, bulkheads and nacelle fittings)
High speed aluminum and /or titanium machining experience.
Vericut 7.XXX simulation minimum experience.
CATIA V5 R2014 minimum experience.
Familiarity with Windows environments and office tools.
Machinist experience preferred.
Associate's Degree in N/C Programming, Manufacturing Technology or equivalent preferred. Bachelor's Degree in Manufacturing Technology or related field preferred.
Combination of education and experience may be considered in lieu of degree.
- Typical machine shop work environment and physical expectations
Numerical Control Programmer 4
Numerical Control Programmer 4
Location: Everett, WA
Duration: 6-7 months
Provides expertise in numerical control, machining, programming and Design For Manufacturing and Assembly (DFMA) in support of new and ongoing projects. Establishes technical requirements for manufacturing and producibility. Plans and guides the development and integration of machining techniques, manufacturing methods, processes, software and equipment to support the design, manufacture and inspection of parts and assemblies. Identifies equipment and approaches, coordinates and assigns work and trains/mentors others. Works under minimal direction.
- Must be a competent journeyman for post-cure (trim/drill)
- Must be very proficient with CATIA V5
- Composites experience is preferred, but not required
Education / Experience:
- AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
Skill Code: 67J-Composites
Numerical Control Programmer
Northrop Grumman Mission Systems is seeking a Numerical Control Programmer to join its Manufacturing Organization. This position is located in Linthicum, Maryland.
Program Numerical Control (CNC) Equipment through the use of Computer Aided Manufacturing (CAM) programming tools. Adjunct to this function, the NC programmer is required to plan and design the tooling required to perform associated NC operations.
Working from piece part, assembly and layout drawings and manufacturing routing, develop or modify NC code which produces piece parts according to the requirements stipulated in the drawing package. Drawing package interpretation requires knowledge of internal manufacturing processes, drafting standards and geometric tolerancing.
Application of principles of automation in programming and fixture design/utilization should be considered to provide for economical and efficient production of the piece part.
Create/modify machine post processors such that NC code can be output for all CNC controls. Detailed understanding of machine controllers and their associated machine language is needed in order that full utilization of each machine tool can be obtained for each Post Processor.
Develop computer systems environment to promote standardization of programming methods and system tools. This encompasses a detailed understanding of system and application architecture to best utilize tools for the efficient and economical creation of NC code.
Confer with machine tool and CAM manufactures and suppliers to effectively resolve system and controller problems as well as learning new and more efficient means of producing a part.
Create/modify tooling in order to effect Engineering product design and change. Confer with Engineering and Drafting on possibilities for manufacturing economy through design simplification and standardization of parts. Represent Tool Design department in planning committee meeting and make recommendations concerning the economical manufacturing procedures.
Responsible for the efficiency, safety, design, simplicity and economical operation of NC programs and tools designed to produce piece parts.
This is a SEA Union represented position.
This is a 1st shift position.
To be considered for this position, you must meet at least one of the phase's outlined below:
Phase I requirement: Minimum 8 years experience with a minimum of 5 years in CNC machine operation and a minimum of 3 years programming experience.
Phase II requirement: Minimum two years college level study in an engineering discipline with an emphasis in manufacturing engineering. Plus, minimum 8 years experience with a minimum of 5 years in CNC machine operation and a minimum of 3 years programming experience.
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.
For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO. U.S. Citizenship is required for most positions.
Numerical Control Pgmr 1
External Job Description
Develops and writes programs for numerically controlled machines using engineering specifications and drawings. Analyzes engineering drawings to define configuration of parts and determine type and sequence of machine operations.
Develops programs for machining parts, tools, or sheet metal on numerically controlled machine tools. Makes proper cutter selections for each part, taking into consideration such factors as speeds, types of cutters, feeds, and control system limitations. Selects program routines for the most efficient computer calculation of dimensional and machining requirements for each part. Tests and modifies existing parts programs for engineering changes or program improvements.
0 Years with Bachelors in Science or NNS Apprentice School Graduate
NNS Apprentice School Graduate from M53 Machine Shop is preferred.
Prefer individual who is able to understand, write, and edit G-Code using CAM programming software for multi-axis machining centers.
Numerical Control Programming
NC Programmers need ASAP
3 MONTH + 12 hour days!
Extensive work history with Aluminum, Sheet Metal and Titanium
Core Sculpting (grinding, machining, cutting etc.)
Cutting Skin Panels and Trim
Catia V5 REQUIRED
Must have Aerospace experience
Need US Citizenship or Permanent resident
Please forward Resume ASAP to email@example.com
Numerical Control Programmer 3
Job Summary About Us
Spirit AeroSystems designs and builds aerostructures for both commercial and defense customers. With headquarters in Wichita, Kansas, Spirit operates sites in the U.S., U.K., France and Malaysia. The company's core products include fuselages, pylons, nacelles and wing components for the world's premier aircraft. Spirit AeroSystems focuses on affordable, innovative composite and aluminum manufacturing solutions to support customers around the globe.
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software.
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams.
Establishes technical requirements for manufacturing and production
Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies.
- Prepare customer approval drawings and manufacturing details, i.e. exploded views, etc.
Observes construction of products as they are completed to understand impact of decisions made throughout the manufacturing engineering and NC programming process.
- Must be able to read and interpret the drawings and specifications for manufacturing requirements.
Skills & Experience
REQUIRED SKILLS & EDUCATION:
3+ years' experience in a manufacturing environment
Ability to read and interpret engineering drawings
Ability to problem solve and multi-task
CATIA V5 experience required.
- High School diploma with 3+ years' experience in NC Programming
PREFERRED SKILLS & EDUCATION:
Bachelor of Science
Complex Machine Programming Experience
Experience with VERICUT
Ultrasonic Cutting & Trimming Experience
Experience with Microsoft Office Suite
Spirit AeroSystems is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, marital or civil partnership status, pregnancy, age, disability, veteran status or any other protected factor under federal, state or local law.
Numerical Control Programmer 3 - 67M-Structures
Numerical Control Programmer 3 - CMM Programmer
Req ID #: 28252-1
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility.
Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.
NC Programmer with the following skills: 1. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM) 2. Preferred: Experience programming dual armed CMM using Metrolog software 3. Skilled in knowledge and interpretation of Geometric Dimension and Tolerancing (GDT) 4. 2+ years working with CATIA (or other Model Based Definition (MBD) software to access released engineering models and interrogate them for GDT and calculated measurements. 2nd shift
Education / Experience:AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM). Preferred: Experience programming dual armed CMM using Metrolog software
Additional Comments:Safety shoes required for this position
NC Programmer with the following skills:
1.1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM)
2.Preferred: Experience programming dual armed CMM using Metrolog software
3.Skilled in knowledge and interpretation of Geometric Dimension and Tolerancing (GDT)
4.2+ years working with CATIA (or other Model Based Definition (MBD) software to access released engineering models and interrogate them for GDT and calculated measurements
Volt is an Equal Opportunity Employer.
Apply Not ready to Apply?
CHECK OUT OUR SIMILAR JOBS
Cnc Programmer Jobs
Jobs in Renton, Washington
CAD Jobs Renton, Washington
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!