Oxidized Finish Plater Job Description Sample
Plater I Location: United States-Florida-Miami
Job Number: 6497 SUMMARY Platers will ensure that the proper coating with proper size and finish as described in the overhaul manual will be met. ESSENTIAL DUTIES AND RESPONSIBILITIES Prepare parts for the plating process.
Plate parts as indicated in the routing to their appropriate size and finish. Must be able to use precision measurement instruments. All other duties as assigned.
CORE COMPETENCIES Commitment to company values and ethics Dependability: personally responsible, completes work in a timely manner, and performs tasks accurately Motivation: must maintain a positive attitude and strong work energy Communication: excellent interpersonal and oral and written communication skills Independent: must have the ability to carry out and follow through on tasks with minimal supervision
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED) required. Must have a minimum of 1 year related experience and/or training. PHYSICAL DEMANDS/WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is a warehouse setting.
Candidates should be able to adapt to a traditional warehouse environment. Must be able to lift and carry up to 50 pounds and comply with OSHA standards Equal Opportunity Employer Minority/Female/Disability/Veteran
Aerospace Metal Finishing Plater
Anodizing, plating aerospace parts. Also general shop labor.
Plater - 2Nd Shift
Eaton in Beltsville, MD has an opening for two 2nd Shift Platers. ESSENTIAL FUNCTIONS:
Review work order or schedule established by team leader
Read and understand process sheet/blueprint
Process parts through plating, passivation, or cleaning lines as required by process specifications (this may involve some fine manipulation/racking of the product, weighs approximately 10 pounds)
Log all procedures as dictated by plating specifications in corresponding log book including electroplating, passivation, and pickling
Calculate surface area of parts to be plated or cleaned and apply current density according to the plating specifications
Operate measuring devices, including micrometers, dial gauges, etc.
Run product through processes using rack or barrels (cleaning, plating, passivation pickling) in accordance with plating specifications
Perform daily bath maintenance (this may include filter changing, chemical additions and cleaning of plating lines) as dictated by the maintenance schedule
Setup of fixtures, racks, and barrels utilizing historical data/logs (done with support of team leader and lab technician)
Able to work in a team environment
Able to work independently with minimal supervision
Exercise proper waste disposal under the guidance of team leader and lab technician
Participate in lean and 5S+ activities, as required
Follow shop environmental and safety procedures, including proper personal protection equipment at all times
Active member of hazardous response team
Other duties as assigned Qualifications Basic Qualifications
High School Diploma or equivalent from an accredited institution
Minimum one year experience in a manufacturing/operations environment
Must be legally authorized to work in the United States without sponsorship
No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area (50 miles) of the Beltsville facility will be considered
All positions require use of information or access to hardware which is subject to the International Traffic in arms regulations. All applicants must be U.S. Persons within the meaning of ITAR. ITAR defines a U.S. Person as a U.S.Citizen, U.S. Permanent Resident, Political Asylee, or Refugee. We make what matters work. Everywhere you look—from the technology and machinery that surrounds us, to the critical services and infrastructure that we depend on every day—you’ll find one thing in common. It all relies on power. That’s why Eaton is dedicated to improving people’s lives and the environment with power management technologies that are more reliable, efficient, safe and sustainable. Because this is what matters. We are confident we can deliver on this promise because of the attributes that our employees embody. We’re ethical, passionate, accountable, efficient, transparent and we’re committed to learning. These values enable us to tackle some of the toughest challenges on the planet, never losing sight of what matters. Job: Manufacturing & Operations Region: North America – US/Puerto Rico Organization: AER FED Fluid Electrical Distribution Job Level: Entry Level Schedule: Full-time Is remote work (i.e. working from home or another Eaton facility) allowed for this position?: No Does this position offer relocation?: No Travel: No Eaton is an Equal Opportunity and Affirmative Action Employer. Eaton is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
SUMMARYThe Plater I individual performs the essential tasks associated with proper operations of plating and metal processing functions with little supervisor. Follows improvement plans to production processes, methods and controls to maximize efficiency of the manufacturingESSENTIAL DUTIES AND RESPONSIBILITIESOther duties may be assigned. Reasonable accommodation for disabilities may be made for one or more of the following:• Performs cleaning and metal processing assignments by blueprints and other specifications including, but not limited to grit blast, aqueous wash, and hot salt.• Operates plating equipment such as spin dryers, hoists, sand blasters, and bake ovens. Troubleshoots problems and determines action to be taken.• Operates electric or manual pumps in the removal of chemicals or acids from plating tanks when necessary.• Performs parts cleaning operations per customer, industry, and/or internal specifications and requirements.• Required to observe all safety rules including, wearing of safety equipment for the handling and usage of acids and chemicals, proper use of all equipment, etc.• Must perform duties within required company and/or industry standards, specifications and policies.• Ensures product quality according to company and/or industry standards and practices.• Must handle all chemicals in accordance with all applicable company and governmental standards and requirements.• Monitors all equipment in the department and corrects the problem or reports to Lead or Supervisor when any equipment in need of repair.• Adheres and implements all company HSE policies, procedures, and practices.• Responsible for complying with the rules and regulations set forth by Federal, Local, and State government, LISI Aerospace, and HSE Procedures.• Responsible for attending all training provided and for adhering to all HSE procedures, policies, and plans, conforming to reporting requirements, and safe operating procedures at all times.• Required to bring any known or suspected nonconformance for all company procedures or legal requirements to management’s attention immediately.• Continually seek opportunities to improve our HSE performance by establishing objectives and targets, measuring progress, and reporting our results.• Supports and maintains waste elimination initiatives specifically related to the function and department such as EMS and recycling opportunities to elimination of production waste.• Other duties may be assigned.Ways of working, Experience, and BehaviorsTo perform the job successfully, an individual should demonstrate the following competencies:• Analytical
Synthesizes complex or diverse information; Collects and researches data; Uses experience to complement data; understands the work flows and procedures.• Technical Skills – Technical skills in manufacturing and processing processes and methods including flow, layout, assembly and production equipment.• Oral Communication
Speaks clearly and persuasively in positive or negative situations; listens intently to others and seeks clarification; Provides clear and pleasant responses to inquires regardless of the situation; Presents complex concepts in a simple manner to achieve understanding of benefit plans at all levels of the organization. Demonstrates group presentation skills; Participates in meetings.• Team Work
Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Places success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed; Recognizes accomplishments of team members.• Business Acumen
Understands business implications of decisions; Displays orientation to profitability; Demonstrates knowledge of market and competition; Aligns work with strategic goals.• Cost Consciousness
Works within approved budget; Develops and implements cost saving measures; Contributes to profits and revenue; Conserves organizational resources.• Adaptability
Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.• Planning/Organizing
Prioritizes and plans work activities; Uses time efficiently; Plans for resources in a creative way only adding cost as absolutely necessary; Sets goals and objectives; Organizes or schedules their tasks• Professionalism
Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.Supervisory ResponsibilitiesThis position requires no supervisory duties
QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Education and/or Experience• High School diploma or equivalent is required.• Working experience of processing manufacturing procedures• A minimum of 1 - 3 years related experience and/or training is desired.Language skills
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to read and write semi-complex instructions, presentations, reports, email, etc.
Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.Mathematical skills:Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions and decimals.Computer SkillsTo perform this job successfully, an individual should have basic knowledge of Word Processing; Spreadsheet software; and other applications.Reasoning ability:Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form; deal with problems involving several concrete variables in standardized situations.Physical Demands:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is frequently required to stand. The employee frequently is required to walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear.
The employee is frequently required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift, push, pull, and/or move up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception.ENVIRONMENT, HEALTH AND SAFETYThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this Job, the employee is frequently exposed to toxic or caustic chemicals. The employee is frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually loud.The responsibilities of the position include compliance with company and governmental safety, environmental and hazardous materials regulations and procedures.
Must use all Personal Protective Equipment provided by the company for the position and the environment.We are proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing.
Plater Operator (Royersford, PA)
3M is seeking a Plater for the Industrial Business Group located in Royersford, PA. At 3M, you can apply your talent in bold ways that matter. Here, you go.
Learn precision plating in a state of the art 3M Facility! This position is a Plating process, producing precision grinding wheels by electroplating nickel and abrasives. Primary Responsibilities include, but are not limited to the following:
Clean and prepare products, wearing the proper PPE
Process nickel plating
Inspect the parts prior to processing for identification, dents, nicks, grit, and metal
Correctly fill out required data and tracking logs
Required to maintain a clean work environment
Perform other duties as assigned
Safely run and use required equipment This position will require:
- Working a fixed 1st shift
Possess a High School Diploma/GED or higher
- Minimum one (1) year of manufacturing experience
Previous plating experience and/or working with chemicals
Excellent verbal communication skills
Ability to read and understand written instructions including work instructions, paperwork, and drawings
Attention to detail
Have sound judgement
Plater - PCB Industry
PCB-Mfg. Plater - Grave Shift
Experience in working in a production environment and some knowledge of production of printed circuit boards is a plus. This is a full-time position working in a fast pace environment.
Ability to lift over 12 lbs.
Pulling and pushing over 12 lbs.
Able to stand for long period of time
Screwing in items
Plating printed circuit boards
3 to 5 years of related experience, must be familiar with the printed circuit industry.
Good written and verbal communications skills
Must be able to multi task in a fast paced environment
Work closely with production staff and being a great team player
Compensation DOE (Depending on Experience)
Benefits include: Medical, Dental, Vision and 401k plan
Education: HS Graduate or equivalent
APCT Inc. is an Equal Opportunity Employer (EOE)
Metal Polisher / Plater
Employer: A BROOKLYN FACTORY (manufacturer of small plumbing tools)
Payrate: $13 at start with full benefits
Schedule: 8 am – 4 pm (F/T)
Production Assistant/ Plater Trainee 2Nd Shift
As you progress and attain various levels of knowledge and expertise you will be rewarded with increased pay. This is a 2nd shift position with approximate work hours between 2pm-1030pm Monday-Friday (some flexibility on start/stop times) with overtime available as needed. Starting wage is $11.00/hr, plus depending on experience.
Ashift differential is available but not included in the starting rate listed. A quarterly profit sharing bonus based on company financial goals can pay up to 6% of employee earnings. General Description:
Production Assistants are responsible for supporting Platers in maximizing tank output with limited waste in a safe, environmentally conscious, quality driven environment. PA's unpack, inspect, and prepare/rack parts for production. PA's play roles in the cycling of parts from tank to tank and perform other duties such as drying, inspecting, transporting and packing parts.
Plater Trainees learn the art and science of metal finishing while working side by side with subject matter experts. Platers progress thru levels of different finishes learning the chemical and electrical make-up in the process of plating parts.
Consistently work in a safe manner utilizing personal protective equipment and trained procedures to ensure personal safety and the safety of co-workers.
Successfully completes training modules and demonstrates proficiency in assigned duties.
Keeps accurate account of own time within system provided
Retrieves and follows shop traveller.
Follows prescribed methods and order for completing tasks to ensure all specs are met.
Utilizes equipment to inspect and identify quality defects
Cleans, plugs, blasts, masks, paints, processes, packs parts per traveler instructions.
Accurately interprets diagram information or blueprints and carries out instructions as written.
- Initiates Production Improvement Form (PIF) upon discovering a discrepancy on a traveller. Conditions: The positions require standing for long periods of time, walking, bending, stretching, reaching and lifting items that may weigh up to 50lbs.
Qualifications: A minimum of a High School Diploma or GED is required.
Must be authorized to work in the United States without sponsorship. Previous experience in chemical handling/storage, manufacturing production, or general machinery operation preferred.
Pre-employment drug testing and background screening required. EOE/M/F/D/V/DFW ID: 2017-1143 External Company URL: www.anoplate.com
A minimum of a High School Diploma or GED is required.
Must be authorized to work in the United States without sponsorship. Previous experience in chemical handling/storage, manufacturing production, or general machinery operation preferred.
Pre-employment drug testing and background screening required. EOE/M/F/D/V/DFW
Hard Chrome Plater
Chrome plater wanted. Experience preferred. If you have any experience with plating of any kind apply here. Job requires hard chrome plating gages up to .0004 plating thickness, and regulating two small bath tanks.
Are you looking for something new and different? Better pay and benefits? If so, let's talk about a future with Bales Metal Surface Solutions. We are currently seeking Full-Time 1st and 2nd shift. Experienced preferred, but we are willing to train the right person. Chrome and Electroless Nickel Platers! Pay based on experience.
Produces plated surfaces by determining coating requirements; preparing surfaces; applying coatings; maintaining equipment.
* Determines coating requirements by studying specifications
* Prepares surfaces by using masking, grit blast, or chemical rinse.
* Completes coatings by using electrolytic, mechanical, immersion, or other processes; operating and adjusting spray guns, airbrushes, stencils, and robotic, automatic, and manual equipment.
* Maintains equipment by troubleshooting malfunctions; completing preventive maintenance requirements and schedules.
* Maintains safe conditions by following guidelines and procedures for handling and disposing of hazardous chemicals and waste.
* Prepares production reports by recording data.
* Updates job knowledge by participating in educational opportunities; reading technical publications.
* Enhances department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.
- Attention to Detail, Thoroughness, Lab Environment, Functional and Technical Skills, Chemistry Techniques, Verbal Communication, Supply Management, Coordination, Inventory Control, Planning, Automotive Manufacturing
- Minimum 2 years experience working as a plater
- High school diploma
- Preferred knowledge of Lab Environment, Functional and Technical Skills, Chemistry Techniques, Supply Management, Coordination, Inventory Control, Planning, Automotive Manufacturing
- Verbal Communication skills
- Health Insurance
- Dental Insurance
- Vision Insurance
- STD/ LTD Insurance
- Life Insurance
- Paid Birthday Off Day
- Paid Holidays
- Paid Vacation
Today, we’re still family owned, and proud to continue the Bales legacy of protecting the life of molds, dies, tooling, and components in ways our competitors don’t dare.
We’re as tough as we are precise. Incomparable finishes, tight tolerances, plus a proud legacy of integrity and innovation. Think solid with a side of rebel. It’s what makes us, and you, shine.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!