Painter Spray I Job Description Sample
Production Spray Painter A
Production Spray Painter A
Job Summary & Essential Functions: The following describes in general terms the purpose and scope of the position.
Other duties may be assigned as needed. Employees must meet all customer/company quality expectations and/or requirements in order to ensure product integrity.
This occupation requires the application of protective prime and finish coatings and/or mat finishes to parts, assemblies and sub-assemblies
made of plastic, ferrous and non-ferrous metals, using brush and spray-painting techniques and equipment.
Sets up, operates and maintains spray guns, pressure pots and oilier painting equipment.
Determines correct preparation of surfaces to be' coated, to insure proper adhesion of the paint; determines from specifications, blueprints or work orders the type and color of primes, paint, protective coatings and/or solution required.
Mixes and thins paint to proper consistency.
Applies protective prime and finish gloss coatings to interior and exterior of parts, subassemblies and assemblies, and works to close tolerances in the application of finished surface coats.
Locates, by use of customer specifications, blueprints and simple arithmetic, color break areas, decals and/or insignias and paints or mounts such items.
Performs difficult rework, final touchup, feathering, shading and blending by the use of spray gun and brush.
May perform such work incident to work described above, such as touchup, patching,masking, puttying, sanding, priming, sealing and surfacing.
Required Skills & Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, qualifications, competencies, abilities and any physical demands if required.
Completion of a union, military or trade school apprenticeship program that includes theory and on-the-job training.
To set up and operate various types and sizes of spray guns, pressure pots, conveyors, and other painting equipment to use references to obtain easily identified information, to use simple arithmetic, including decimals and fractions
Required Experience/Education/Training/Certifications: To perform this job successfully, an individual must possess the outlined experience level, education, training, minimum years of experience, product or industry knowledge plus any certifications in order to be considered.
Ability to speak effectively before groups of co-workers and management
Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form
Ability to read and write in English at a 12th grade level
Ability to perform basic math functions at a 12th grade level
Good attendance and a positive attitude with a team player approach
Four (4) years experience as a journey-level painter in a commercial, industrial, or facilities operations setting, both interior and
exterior. Aerospace experience preferred.
High School Diploma or General Education Degree (GED)
Work Environment and Safety Equipment Required: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job.
While performing the duties of this Job, the employee is regularly required to stand to perform work. The employee is required to reach with hands and arms and talk or hear.
The employee must be able to lift, push, pull or move up to thirty (30) pounds or more with assistance. Specific vision abilities required by this job include close vision, color vision, peripheral vision and ability to adjust focus. Hearing protection must be worn in designated manufacturing areas
Fully enclosed shoes
Safety glass required in all manufacturing areas
Other Personal Protective Equipment (PPE) as required
Management reserves the right to add, modify, change or rescind the work assignments in accordance with business needs, and to make reasonable accommodations so that qualified employees can perform the essential function of the job.
801 Royal Oaks
Monrovia, California, 91016
Industrial Spray Painter 1St Shift
Who we are and what we do:
Pace Industries is North America's leading full-service die casting manufacturer. Our mission is to provide uncommon, creative die casting and support solutions that contribute to the success of our customers. Our die cast parts are used in automobiles, motorcycles, generators, snow mobiles, lawn mowers, washing machines, power hand tools, BBQ grills, commercial lighting and many other well-known products. You can have a significant impact on our cultural transformation.
As a premier job shop finisher, JapEnameLac (JEL) has served the changing needs of its customers for more than 65 years. JEL's name is recognized throughout the industry for our commitment to quality, on time delivery and years of experience in the finishing industry. From chromating, phosphating, multiple automated powder coat systems, wet painting, robotic electrostatic painting, silk screening, pad printing and stenciling, we do it all.
Spray a variety of parts to close tolerances and specifications using different types of paint. Performs job in manner minimizing hazards to self, others, and the environment.
Duties and Responsibilities:
Obtain paint specified for the job from the paint inventory.
Mix with appropriate thinner as required for spraying viscosity.
Mix two-part urethane paint and reducer.
Spray paint parts to specifications.
Inspects parts for compliance with customers' specifications.
Pour surplus paint into waste paint bucket beside booth for collection as hazardous waste by material hander.
Wash gun with solvent and collect used solvent in second bucket beside booth for collection as hazardous waste by the material handler.
Pick up spills hazardous waste promptly with absorbent material. Exercise care in handling hazardous waste and follow the hazardous waste procedures.
High school diploma or GED equivalent.
Two years industrial spray painting or equivalent preferred.
Good eye/hand coordination, finger dexterity, and color sensitivity.
Ability to follow instructions. Ability to communicate clearly and effectively with others.
High level of dependability in all aspects of the job.
Please note that the duties and requirements described herein are intended to represent general contents of this job. This is not to be construed as an exhaustive statement of duties and responsibilities.
Pace Industries has a strong commitment to the principle of diversity, and in that spirit, seeks a broad spectrum of candidates including women, minorities, veterans, and people with disabilities. Individuals with disabilities desiring accommodations in the application process should notify the hiring department by the application deadline.
Plasma Spray Operator
Pratt and Whitney is a world leader in aircraft engines and auxiliary power units. Headquartered in East Hartford, Connecticut, the company has locations around the United States and across the world.
We are a global leader in aviation propulsion and we are behind many of the major advances in both military and commercial engines. We design, manufacture and service aircraft engines, auxiliary and ground power units, and small turbojet propulsion products.
Do you have the experience to join our Team?
Prepare parts for plasma spray (mask, grit blast, anti-bond of plasma spray)
Set up thermal spray parameters according to PMS and/or SOP Perform thermal spray operations
Maintain thermal spray records pertinent to that department
Complete OJT program, or successfully complete related Vo-tech training (e.g. precision tools, process controls) Maintain equipment, perform minor preventative maintenance
Maintain work area in a clean and orderly manner
Read basic graphic instructions and dimensional drawings Use precision measuring tools, i.e. micrometers and calipers Perform other duties as required to support company objectives
Embrace and support ACE activities within the department
Industrial Spray Painter
Masco Cabinetry is proud to be one of America's most respected manufacturers of cabinet and countertop solutions with three nationally recognized cabinetry brands, KraftMaid, Merillat, and Quality Cabinets. We market thousands of different styles and products in a demanding marketplace where style and craftsmanship make all the difference.
Masco Cabinetry continually works at maintaining its world-class manufacturing operations by adopting continuous improvement principles, reducing waste and continuing to invest in people and technologies.
We have a first shift production opening for the position of Sprayer in our Finishing department. We offer competitive wages, excellent benefits and employee discounts on a wide range of products. If you are ready to put your talents to work and embrace manufacturing excellence, apply to Masco Cabinetry today!
PRINCIPAL FUNCTIONAL RESPONSIBILITIES:
Finish spraying and detailing
Loading products on and off the line
Responsible for inspecting your own work
Perform routine quality checks using pin depth gage, calipers and tape measure.
Track and record all daily production activity.
Maintain high level of quality production by working to tolerance specifications.
Participate in various trainings.
Maintain a clean work environment.
Contributes to team effort by accomplishing related results as needed.
Perform other related duties as assigned.
ESSENTIAL QUALIFICATIONS AND SKILLS:
Good overall work record, including a satisfactory attendance record and self-motivation
Knowledge of safe work practices
High School diploma or GED preferred
Ability to read a tape measure
Ability to read/write
Ability to operate various tools
Ability to work in a team environment
Prolonged standing and repetitive motions, bending, stooping, pushing, and pulling
May be required to frequently lift up to 20 lbs.
Hand dexterity and strength
Overtime is required, including weekends
May be required to work a flexible schedule
Spray Technician For Golf Courses
Under the supervision of the Golf Course Superintendent and the Assistant Superintendents performs pesticide applications on golf course properties.
Spray Tech is responsible for appropriately applying all chemicals, pesticides, herbicides, and fertilizers associated with grounds and golf course maintenance.
Responsible for reading, understanding and keeping current with Safety Data Sheets and pesticide labels; responsible for compiling reports of pesticide usage (spray cards).
Executes the spray program as directed by the Golf Course Superintendent.
Maintains application equipment chemical storage and mixing areas in compliance with county, state and federal regulations.
Perform safe mechanical operation and calibration of application equipment.
Must be able to safely operate a golf cart.
Inspect all areas of property to determine pesticide and fertilizer needs.
Apply pesticides and fertilizers as appropriate to maintain proper condition of golf course and grounds.
Implement Integrated Pest Management practices.
Maintain product inventory with appropriate recordkeeping.
Perform other duties and/or tasks as directed by Management.
Knowledge, skills and abilities
Must be able and willing to take directions.
Must possess excellent organizational skills and coordinate and complete tasks with limited supervision.
Must be a self-starter and eager to learn.
Must be able to recognize and solve problems.
Must possess time management skills.
Must maintain high performance standards.
Knowledge of chemicals; knowledge of insects; turf diseases; grasses and weeds.
Knowledgeable in the safe mechanical operation and calibration of application equipment.
Ability to deal effectively and cooperatively with employees, management and members.
Must be a detail-oriented individual and possess time management skills.
Education and experience
High school diploma or equivalent preferred.
Must complete training requirements as specified by the Department of Agriculture.
Commercial Applicator Restricted Use Pesticide License is required.
The working knowledge of application equipment and calibration techniques; knowledge of chemicals; knowledge of insects; turf diseases; grasses and weeds.
Ability to follow oral and written directions.
Minimum 1 year previous spray technician or pesticide application on golf courses.
Must be able to lift up to 75lbs.
Apply on our website at:
Drug Free Workplace
BrightView Landscape Services
Brighter futures start here. Welcome to BrightView. We're a team of talented professionals, driven by results and relationships, and committed to taking care of each other, clients, and communities.
BrightView was recently formed through the combination of landscape industry pioneers and leaders, Brickman and ValleyCrest. This defining event united more than 140 years of experience, an extraordinary portfolio of high-profile projects and clients, and a vast, national network of expertise and innovation. As one and true to our name, we're reinventing the industry while affording our 22,000+ team members access to the most comprehensive training, resources, benefits, mentorship, and opportunities for career advancement.
A brighter future is in your hands. We're currently seeking a Spray Technician with chemical fertilization or pesticide industry experience to work with our commercial customers. The ideal applicant will be a self starter and have a stable work history.
Skills we're seeking:
Minimum 1 year experience with chemical or spray applications
Ability to manage projects according to contract and budget
Customer service experience
Strong attention to detail
Able to operate efficiently and safely at all times
Pesticide applicators license or in process
Bilingual (Spanish) a plus
Paid time off
Medical, dental, vision insurance
BrightView Landscapes, LLC is an Equal Opportunity and E-Verify Employer.
Spray Finisher Paint 1St Shift
Job ID :
US - North Carolina - Asheville
Spray finish / Powder paint on automatic paint conveyor line. Loads cabinets, kits and components onto the automatic paint conveyor line to ensure optimum coverage of finish. Pulls parts according to request made by the assembly lines. Removes painted parts and delivers parts and kits to specified departments. Inspect parts for defects, touches up paint as required. Conducts paint tests for quality control. Cross train on other positions within the department as needed.
Follows paint production schedule to determine parts to load. Receives instructions on parts to be painted and fills paint hopper with specified powder as needed, matching paint number with part number. Checks spray gun adjustments such as air/paint mixture, pressure gauges, and fluid control. Adjusts paint line speed after completion of interior white paint. Conducts paint test on every color change for quality control, complete daily log and tags as needed. Adjusts paint line speed after completion of interior white paint. Coats parts with powder paint in the prescribed manner in accordance with the cosmetic acceptance criteria.
Inspect parts in the staging area to verify that the proper identification (part number, quantity, color and destination) is present. Utilizes different protective supplies to make certain all parts delivered to the assembly lines are free of any dings / dents, scratches, and scuff marks. Delivers painted parts and kits to specified department or stores in designated racks. Stages all nonconforming material in the appropriate nonconforming materials area. Completes appropriate internal control documents.
Reorders raw materials and finished parts using the Kanban inventory system. Maintains Supermarket racks and inventory accuracy using the correct part numbers and bin locations. Moves units or positions pieces manually or using work aids such as handtrucks or forklifts.
Hazards – Exposed to potential hazards including pinch points, fall hazards, chemical exposure and general safety issues associated with manufacturing. Works in hot, cold, dusty, elevated and noisy area.
Performs other duties, provides support and coverage on all operations on line as requested by supervisor. Cross training and flexibility required.
Performs all duties using required safety procedures and equipment according to company policies and practices within guidelines of ISO standards, quality, and safety. Maintains clean and organized work area that supports co-workers as well as safety and efficiency.
Engages, initiates, and suggest initiatives that support team goals and continuous improvement in process.
Communicates effectively within cell or with other departments to relay key information. Open to and asks for suggestions of others regarding production issues and goals.
Performs all job duties consistent with the Code of Ethics and the 4-I Values, serves as a role model in the workplace. Trains and mentors new employees or transitioning workers in the area.
Utilizes computer systems to check e-mail, complete on line training and complete Performance Management and Development (PMD) annual review process.
Requires high school diploma or GED.
Standing, bending, reaching and handling bulky parts is common to the job. Frequently lifts up to 35 pounds. Good eye/hand and foot coordination is required.
Beginner Computer skills or willingness to learn.
Ability to read and differentiate part numbers, labels, and work instructions.
3- 6 month manufacturing experience preferred.
General knowledge of spray finish tools and processes is preferred.
If you are an individual with a disability who requires reasonable accommodation to complete any part of our application process, click here for further assistance.
Thermo Fisher Scientific is an EEO/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other legally protected status.
This position is located with the Facilities Management Service at the Washington DC Medical Center, Washington, DC. In this position you will be responsible for painting and paper hanging throughout the VA Medical Center to preserve and protect the appearance of surfaces and finishes to the interior and exterior of all buildings, structures, furniture and building accessories.
Learn more about this agency
Duties of this position include, but are not limited to:
Repair cracks in masonry, deteriorated caulking compounds and other materials to assure surfaces are prepared to receive paint or wall covering so no marks or rough areas are visible when paint or wall covering is in place.
Selects and uses the proper equipment and tools such as brushes, rollers, spray guns, compressors, scraper, straight edges, scaffold and ladders.
Mixes all painting materials to ensure uniformity of color, complete dispersion of pigment and uniform composition.
Experienced with all types of paints and related components of crafts required to accomplish assigned duties, such as water, rubber alkyd base, oils, enamels, varnishes, epoxy and paint removers.
Uses and applies knowledge of spray compressors, nozzle's and all related spraying equipment.
Embosses signs, paints traffic lines and directional signs by lettering or stencil, paint boundary fences, light posts and fire hydrants.
Installs vinyl, yarn type, construction and face wall covering.
Mixes and applies adhesives by methods and means strictly in accordance with manufacturer's directions.
Installs wall paper to be secure, smooth and clean, without wrinkles, gaps or overlaps.
Assures each type of wall paper is of the same dye lot, color, and design.
Installs wall coverings in continuous sheets and can butt all joints to hairline fit.
Double cut wall paper to match exactly.
Provides tasks and work orders to other staff painters in cases/opportunities where the Carpentry and In-House Projects supervisor is unavailable
Applies wall covering in accordance with manufacturer's instruction, using mechanics experience and skill.
Work Schedule: Generally 8 hour shifts between 7:00 am to 5:00 pm
Position Description Title/PD#: Painter, WG-4102-09
This position is covered by AFGE bargaining unit. Per the AFGE Master Agreement, the
Area of Consideration will be:
1st Area of Consideration
Current Facility and CBOC employees
2nd Area of Consideration
VA Nationwide applicants
3rd Area of Consideration
Other Status candidates (if applicable)
- Job family (Series)
HelpRequirements Conditions of Employment
You must be a U.S. Citizen to apply for this job
Designated and/or random drug testing may be required
Selective Service Registration is required for males born after 12/31/1959
You may be required to serve a probationary period
Subject to a background/security investigation
Pre-employment physical required
Selected applicants will be required to complete an online onboarding process
To qualify for this position, applicants must meet all requirements by the closing date of this announcement, 10/12/2018.
EXPERIENCE: A specific length of training and experience is not required, but you must show evidence of training or experience of sufficient scope and quality of your ability to do the work of this position. Evidence which demonstrates you possess the knowledge, skills, and ability to perform the duties of this position must be supported by detailed descriptions of such on your resume. Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C.
Your background must demonstrate responsibility for painting and paper hanging to preserve and protect the appearance of surfaces and finishes to the interior and exterior of all buildings, structures, furniture and building accessories. (Please be sure examples of your experience are listed in your Resume).
SCREEN-OUT ELEMENT: Your qualifications will first be evaluated against the prescribed screen out element, which usually appears as question 1 in the on-line questionnaire. Those applicants who appear to possess at least the minimal acceptable qualification requirement are considered for further rating; those who do not are rated ineligible and are eliminated. The potential eligibles are then rated against the remainder of the Job Elements:
Ability to do the work of the position without more than normal supervision.
Ability to provide production support services.
Knowledge of equipment assembly, installation, and repair, etc.
Ability use and maintain tools and equipment.
Knowledge of materials.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Note: A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment.
Regular walking tours of the main hospital campus and out to buildings which include some lifting, kneeling, standing, climbing and stooping. Painter duties to include maintenance and repairs frequently require working in awkward and cramped positions and lifting up to fifty (50) pounds. Frequent standing, walking, and climbing are required while checking requirement areas of the DC VAMC.
Incumbent is required to use ladders, scaffolds, platforms and may require working in cramped and hard to reach places. Daily task require lifting, carrying objects and equipment. On occasion may be required to wear protective clothing and equipment. Incumbent is also subject to possibility of cuts, bruises, scrapes and burns.
Trinity Shoring Products is searching for a Painter at our Union City, MI plant. As a Painter, you'll prepare, coat, and finish metal and/or other surfaces by operating conventional and airless spray equipment to apply industrial paint finishes on metal and other types of surfaces.
Trinity Shoring Products makes trench shoring equipment for the construction industry. Our dedicated team builds high-quality trench shields and shoring products that are made to last.
2nd Shift Monday
Friday: 4:00 pm
What you'll do:
Prepare materials, surfaces and structures for coverage with paint, laminate, rubber or other material
Operate conventional and airless spray equipment to apply industrial paint finishes on metal and other types of surfaces
Mix and apply alkyds, epoxies, gel coats, powder coats, urethane, zinc epoxies and water borne paint systems according to a prescribed formula
Clean paint lines, paint guns and perform other cleaning preventative maintenance to ensure that painting apparatus remain in working order
Initiate and maintain all applicable paperwork as required
Regulate the temperature and air circulation in drying ovens
Follow all safety rules and practices
Perform other duties as assigned
What you'll need:
Minimum of 1 year of industrial experience
An understanding of the curing process
Knowledge and ability to operate all equipment in that area
Ability to perform all essential functions safely and efficiently
Ability to function as a team member and establish and maintain effective working relationships
Regular and predictable attendance dance
The position is in the Department of Veterans Affairs (VA), Veterans Health Administration (VHA), at the VA San Diego Healthcare System, VA Medical Center (VAMC) in the Engineering Service, In-House Construction Team in San Diego, CA.
Learn more about this agency
Major duties include, but are not limited to:
Layout work to complete assignment, such as brushes, rollers, spray guns, trowels, screeds, straight edges, etc.
Prepares surfaces for paper hanging by sanding, scraping, and sizing.
Prepares surfaces for painting by scraping, hand and machine sanding, wire brushing, dusting, applying paint remover, filling cracks and nail holes, etc.
Implements and continuously updates the Engineering Service Automated Engineering Management System/Medical Equipment Reporting system (AEMS/MERS) that apply to the paint shop section.
Reads and applies directions that relate to the mixture, use and application of various kinds of materials.
Uses diagrams and schematics.
Uses tools and equipment such as brushes, rollers, spray guns, trowels, screeds, straight edges, viscosity testers, graining devices and wet and other thickness gauges.
Performs other duties as assigned.
Work Schedule: Monday to Friday - 8am to 4:30pm
Recruitment & Relocation Incentives: Not authorized
Job family (Series)
HelpRequirements Conditions of Employment
Must be a U.S. citizen
Subject to a background/security investigation
Designated and/or random drug testing may be required
Selective Service Registration is required for males born after 12/31/1959
May be required to serve a probationary period
Pre-employment physical may be required
Selected applicants may be required to complete an online onboarding process
PHYSICAL EFFORT AND WORK CONDITIONS: The employee prepares and coats surfaces from ladders, scaffolds, and platforms, and where the surfaces to be coated are in cramped and hard-to-reach places. This position requires the employee to stand, stoop, bend, kneel, climb, and work in tiring and uncomfortable positions. The employee frequently lifts, carries and sets up equipment that weighs up to 10 pounds. Occasionally, the employee may handle materials that weigh 40 pounds or over.
The work is done inside and outside, and dirt, spray, and fumes are usually present. The employee sometimes works outside in bad weather. Occasionally, the employee may be required to wear protective equipment and clothing that are sometimes heavy and uncomfortable. The employee is frequently exposed to the possibility of cuts and bruises. The employee is occasionally exposed to the possibility of broken bones.
Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C (www.opm.gov/qualifications/x-118c). For this position, the job element method is used to match what you, the applicant, can do against what the work calls for. Your knowledge, skills and abilities will be compared to the knowledge, skills and abilities (called job elements) needed for success. Your qualifications will first be evaluated against the prescribed screen out element (WG-2 and higher only; screen-outs are not applicable to WG-1). Applicants who appear to meet the screen out element are considered for further rating; those who do not are rated ineligible and are eliminated from consideration. The potential eligibles are rated against the remainder of the job elements. While a specific length of training and experience is not required, your responses to the questionnaire must be supported by detailed descriptions of your experience on your resume.
You will be rated on the following Job Elements as part of the assessment questionnaire for this position:
Equipment Assembly, Installation, Repair
Interpret Instructions, Specifications (includes blueprint reading)
Use and Maintain Tools and Equipment
IMPORTANT: A full year of work is considered to be 35-40 hours of work per week. All experience listed on your resume must include the month and year start/end dates. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!